CPC1106N

CPC1106N
60V Normally-Closed Single-Pole
4-Pin SOP OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
LED Current to Operate
Rating
60
75
10
0.5
Units
VP
mArms / mADC

mA
Features
• Designed for EN50130-4 Compliant
Security Systems
• Only 0.5mA of LED Current Required to Operate
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Immune to Radiated EM Fields
• Wave Solderable
• Tape & Reel Version Available
Description
The CPC1106N is a 60V, normally-closed, single-pole
(1-Form-B) solid state relay in a 4-pin SOP package
that employs optically coupled MOSFET technology to
provide 1500Vrms of input to output isolation.
The relay outputs are constructed with efficient
MOSFET switches and photovoltaic die that
use IXYS Integrated Circuits Division's patented
OptoMOS architecture while the input, a highly
efficient infrared LED, provides the optically coupled
control.
The CPC1106N, using IXYS Integrated Circuits
Division’s state of the art double-molded vertical
construction packaging to produce one of the world’s
smallest relays, offers board space savings of at
least 20% over the competitor’s larger 4-pin SOP
relay.
Applications
Approvals
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1172007
• EN/IEC 60950-1 Certified Component:
Certificate B 13 12 82667 003
Ordering Information
Part #
CPC1106N
CPC1106NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
2
3
Load
Load
Switching Characteristics
of Normally-Closed Devices
Form-B
IF
ILOAD
90%
10%
toff
DS-CPC1106N-R04
www.ixysic.com
ton
1
INTEGRATED CIRCUITS DIVISION
CPC1106N
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Disipation
Total Power Dissipation 1
Isolation Voltage, Input to Output
ESD Rating, Human Body Model
Operational Temperature
Storage Temperature
1
Ratings
60
5
50
1
70
400
1500
8
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Units
VP
V
mA
A
mW
mW
Vrms
kV
°C
°C
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Derate linearly 3.33 mW / ºC
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous
Peak
On-Resistance 1
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate 2
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Capacitance, Input to Output
1
2
2
Conditions
Symbol
Min
Typ
Max
Units
IF=0mA
t=10ms
IF=0mA, IL=75mA
IF=0.5mA, VL=60VP
IL
ILPK
RON
ILEAK
-
3.85
-
75
±350
10
1
mArms / mADC
mAP

IF=0.5mA, VL=50V, f=1MHz
ton
toff
COUT
-
10
10
10
-
IL=75mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.05
0.9
-
0.16
1.2
-
0.5
1.4
10
mA
mA
V
µA
VIO=0V, f=1MHz
CIO
-
1
-
pF
IF=2mA, VL=10V
µA
ms
pF
Measurement taken within 1 second of on-time.
For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 2mA is recommended.
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1106N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
25
Device Count (N)
Device Count (N)
25
20
15
10
5
0
20
15
10
5
0
0.50
10
5
0.11
0.13 0.15 0.17 0.19 0.21
LED Forward Current (mA)
10
5
1.2
1.1
1.0
-40
0.30
3.80 3.85 3.90 3.95
On-Resistance (:)
IF=5mA
IF=2mA
IF=1mA
Typical Turn-On Time
vs. LED Forward Current
(IL=50mA)
20
40
60
Temperature (ºC)
80
542
540
538
536
Typical Turn-On Time
vs. Temperature
(IL=50mA)
-20
0
20
40
60
Temperature (ºC)
80
100
93
800
600
400
50
Typical Turn-Off Time
vs. Temperature
(IL=50mA)
2500
700
600
IF=5mA
IF=2mA
IF=1mA
500
400
300
100
-40
10
20
30
40
LED Forward Current (mA)
3000
IF=1mA
IF=2mA
IF=5mA
2000
1500
1000
500
200
0.10
-40
91
Typical Turn-Off Time
vs. LED Forward Current
(IL=50mA)
0
Turn-Off Time (Ps)
0.15
83
85
87
89
Blocking Voltage (VP)
1000
50
800
0.20
81
0
10
20
30
40
LED Forward Current (mA)
900
0.25
4
200
0
Typical IF for Switch Operation
vs. Temperature
(IL=50mA)
6
1200
544
100
8
1400
534
0
1.1
10
79
532
-20
1.0
Typical Blocking Voltage Distribution
(N=50, IF=0.5mA)
4.00
Turn-Off Time (Ps)
Turn-On Time (Ps)
1.3
0.6 0.7 0.8 0.9
Turn-Off Time (ms)
0
3.75
546
1.4
0.5
2
3.70
Turn-On Time (Ps)
LED Forward Voltage (V)
14
15
548
1.5
5
12
Typical LED Forward Voltage Drop
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
10
0.4
20
0.23
1.6
15
0.68
0
0
LED Forward Current (mA)
0.56 0.59 0.62 0.65
Turn-On Time (ms)
Device Count (N)
15
0.53
Typical On-Resistance Distribution
(N=50, IF=0mA, IL=75mA)
25
Device Count (N)
Device Count (N)
20
20
0
1.235 1.240 1.245 1.250 1.255 1.260 1.265
LED Forward Voltage (V)
Typical IF for Switch Operation
(N=50, IL=75mA)
Typical Turn-Off Time
(N=50, IF=2mA, IL=75mA)
25
Device Count (N)
30
Typical Turn-On Time
(N=50, IF=2mA, IL=75mA)
-20
0
20
40
60
Temperature (ºC)
80
100
0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance Data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1106N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
Typical On-Resistance
vs. Temperature
(IF=0mA, IL=50mA)
5.0
Typical Load Current
vs. Load Voltage
(IF=0mA)
100
Maximum Load Current
vs. Temperature
(IF=0mA)
80
4.0
3.5
Load Current (mA)
Load Current (mA)
On-Resistance (:)
75
4.5
50
0
-50
70
65
60
55
50
45
-20
0
20
40
60
Temperature (ºC)
80
Typical Blocking Voltage
vs. Temperature
(IF=1mA)
50
82
80
78
76
74
72
-40
-20
0
20
40
60
Temperature (ºC)
80
40
-0.4 -0.3 -0.2
100
Leakage Current (nA)
Blocking Voltage (VP)
84
-100
0.3
Typical Leakage vs. Temperature
Measured Across Pins 3&4
(IF=1mA, VL=60V)
40
30
20
10
800
-40
0.4
40
0
-40
100
-0.1 0.0 0.1 0.2
Load Voltage (V)
Output Capacitance (pF)
3.0
-40
-20
0
20
40
60
Temperature (ºC)
80
100
Output Capacitance vs. Load Voltage
(IF=0.5mA)
35
30
25
20
15
10
5
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
0
10
20
30
40
Load Voltage (V)
50
60
Energy Rating Curve
(IF=0mA)
Load Current (mA)
700
600
500
400
300
200
100
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
*The Performance Data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1106N
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1106N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC1106N
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R04
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1106N
Mechanical Dimensions
CPC1106N
4.089 ± 0.203
(0.161 ± 0.008)
Recommended PCB Land Pattern
0.200 ± 0.025
(0.008 ± 0.001)
0.60
(0.0217)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.432 ± 0.127
(0.017 ± 0.005)
5.60
(0.2205)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
1.30
(0.0512)
2.184 Max
(0.086 Max)
2.54
(0.10)
Pin to package standoff:
0.0637 ± 0.0383
(0.0025 ± 0.0015)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
CPC1106NTR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00
(0.472)
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Dimensions
mm
(inches)
Embossed
Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1106N-R04
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
11/10/2014