CPC1004NTR

CPC1004N
100V Normally-Open Single-Pole
4-Pin SOP OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Rating
100
300
4
Units
VP
mADC

Features
• Operating Temperature Range: -40ºC to +110ºC
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• Low Drive Power Requirements
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Wave Solderable
• Tape & Reel Version Available
Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security Systems
• Aerospace
• Industrial Controls
• Reed Relay Replacement
Description
CPC1004N is a miniature, low-voltage, low
on-resistance, normally-open (1-Form-A) DC solid
state relay in a 4-pin SOP package. The relay uses
optically coupled MOSFET technology to provide
1500Vrms of input to output isolation. The efficient
MOSFET switch and photovoltaic die use IXYS
Integrated Circuits Division’s patented OptoMOS
architecture while the optically coupled output is
controlled by a highly efficient infrared LED.
The CPC1004N uses IXYS Integrated Circuits
Division’s state of the art double-molded vertical
construction packaging to produce one of the world’s
smallest relays. The CPC1004N is ideal for replacing
larger, less-reliable reed and electromechanical
relays.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1172007
• EN/IEC 60950-1 Certified Component:
Certificate B 13 12 82667 003
Ordering Information
Part #
Description
CPC1004N
4-Pin SOP (100/tube)
CPC1004NTR 4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
3
2
DC +
DC -
Switching Characteristics
of Normally-Open Devices
Form-A
IF
90%
10%
ILOAD
ton
DS-CPC1004N-R08
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC1004N
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation
Total Power Dissipation 1
Capacitance Input to Output
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
100
5
50
1
70
400
1
1500
-40 to +110
-40 to +125
Units
VP
V
mA
A
mW
mW
pF
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Derate linearly 3.33 mW / ºC
Electrical Characteristics @ 25°C (Unless Otherwise Specified)
Parameter
Output Characteristics
Load Current
Continuous 1
Continuous
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
1
2
2
Conditions
Min
Typ
Max
ILPK
RON
ILEAK
-
-
300
100
500
4
1
IF=0mA, VL=50V, f=1MHz
ton
toff
COUT
-
25
3
1
-
IL=300mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.3
0.9
-
0.9
0.8
1.2
-
2
1.4
10
T=110°C, IF=10mA
t=10ms
IL=300mA
VL=100VP
IF=5mA, VL=10V
Symbol
IL
Units
mADC

µA
ms
pF
mA
mA
V
µA
Load current derates linearly from 300mA @ 25oC to 100mA @ 110oC.
Measurement taken within 1 second of on-time.
www.ixysic.com
R08
INTEGRATED CIRCUITS DIVISION
CPC1004N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
25
Device Count (N)
30
Device Count (N)
Typical Turn-On Time
(N=50, IF=5mA, IL=300mA)
25
20
15
10
Typical Turn-Off Time
(N=50, IF=5mA, IL=200mA)
25
20
Device Count (N)
35
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
15
10
5
20
15
10
5
5
0
0
Typical IF for Switch Operation
(N=50, IL=300mA)
20
15
10
5
0
0.30
0.35 0.40 0.45 0.50
Turn-On Time (ms)
0.55
0.21
Typical IF for Switch Dropout
(N=50, IL=300mA)
25
Device Count (N)
Device Count (N)
25
0
0.25
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
0.75
0.80 0.85 0.90 0.95
LED Current (mA)
0.23 0.24 0.25 0.26
Turn-Off Time (ms)
0.27
30
20
15
10
5
25
20
15
10
5
0
0.70
0.22
Typical On-Resistance Distribution
(N=50, IF=2mA, IL=300mA)
35
Device Count (N)
1.17
0
1.0
0.75
0.80
0.85 0.90 0.95 1.00
LED Current (mA)
2.9
1.05
3.0
3.1
3.2
3.3
3.4
3.5
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
106
I F =50mA
1.2
I F =10mA
I F =5mA
1.0
0.8
-40
-20
0
20
40
60
Temperature (ºC)
80
100
120
124
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0.7
Turn-Off Time vs. LED Forward Current
(IL=100mA)
0.6
Turn-Off Time (ms)
Turn-On Time (ms)
LED Forward Voltage Drop (V)
1.8
1.4
112 115 118 121
Blocking Voltage (VP)
Turn-On Time vs. LED Forward Current
(IL=100mA)
Typical LED Forward Voltage Drop
vs. Temperature
1.6
109
0.5
0.4
0.3
0.2
0.1
0
0
5
10 15 20 25 30 35 40
LED Forward Current (mA)
45
50
0
5
10 15 20 25 30 35 40
LED Forward Current (mA)
45
50
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R08
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1004N
I F =5mA
I F =10mA
-40
3.0
-20
0
20
40
60
80
100
12
I F =10mA
I F =5mA
-20
0
20
40
10
IF = 5mA
8
6
IF = 10mA
4
2
0
60
80
-40
100
0
20
40
60
80
100
110
Temperature (ºC)
Typical IF for Switch Operation
vs. Temperature
(IL=100mA)
Typical IF for Switch Dropout
vs. Temperature
(IL=100mA)
Typical Load Current vs. Load Voltage
(IF=5mA)
3.0
300
2.5
1.5
1.0
2.0
1.5
1.0
100
0
-100
-300
-1.5
0
0
200
-200
0.5
0.5
Temperature (ºC)
Temperature (ºC)
-0.5
0
0.5
Load Voltage (V)
Typical Maximum Load Current
vs. Temperature
Typical Blocking Voltage
vs. Temperature
Typical Leakage vs. Temperature
Measured Across Pins 3 & 4
(VL=100V)
-20
0
20
40
60
80
-40
100
-20
0
20
40
60
80
100
0.016
121
0.014
120
0.012
400
350
300
250
200
I F =5mA
150
I F =10mA
119
118
117
100
116
50
115
-20
0
20
40
60
80
100
Leakage (PA)
122
450
Blocking Voltage (VP)
500
-40
-20
Temperature (ºC)
2.0
-40
Typical On-Resistance vs. Temperature
(IL=300mA)
Temperature (ºC)
LED Current (mA)
LED Current (mA)
Typical Turn-Off Time vs. Temperature
(IL=300mA)
-40
2.5
Load Current (mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
On-Resistance (:)
Typical Turn-On Time vs. Temperature
(IL=200mA)
Load Current (mA)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Turn-Off Time (ms)
Turn-On Time (ms)
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
1.5
0.010
0.008
0.006
0.002
-20
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
1.0
0.004
-40
120
-1.0
0
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Load Current (A)
Energy Rating Curve
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
Time
1s
10s 100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R08
INTEGRATED CIRCUITS DIVISION
CPC1004N
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1004N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC1004N
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R08
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1004N
MECHANICAL DIMENSIONS
CPC1004N
4.089 ± 0.203
(0.161 ± 0.008)
Recommended PCB Land Pattern
0.200 ± 0.025
(0.008 ± 0.001)
0.60
(0.0217)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.432 ± 0.127
(0.017 ± 0.005)
5.60
(0.2205)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
1.30
(0.0512)
2.184 Max
(0.086 Max)
2.54
(0.10)
Pin to package standoff:
0.0637 ± 0.0383
(0.0025 ± 0.0015)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
CPC1004NTR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00
(0.472)
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Dimensions
mm
(inches)
Embossed
Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1004N-R08
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
9/24/2014