CPC1215

CPC1215
Voltage-Controlled, Single-Pole,
Normally Open OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Input Voltage to operate
Rating
400
500
6
5-12
Units
VP
mArms / mADC

V
Features
•
•
•
•
•
•
•
•
•
Voltage-Controlled Operation
Matches Popular Reed Relay Pin-Out
3750Vrms Input/Output Isolation
100% Solid State
Arc-Free With No Snubbing Circuits
No EMI/RFI Generation
Immune to Radiated EM Fields
4-Pin DIP Package
Auto Pick & Place, Wave Solderable
Description
The CPC1215 is a voltage-controlled, single-pole,
normally open (1-Form-A), optically coupled solid
state relay in a 4-pin Dual In-line Package (DIP). IXYS
Integrated Circuits Division's patented OptoMOS
architecture makes available the optically coupled
technology necessary to activate the output's efficient
MOSFET switches while providing a 3750Vrms input-tooutput isolation barrier. Control of the isolated output is
accomplished by means of a highly effective GaAlAs
infrared LED at the input while the internal resistor
in series with the LED enables the input's voltagecontrolled operation.
Because the input is solid state there is no need for
snubbers or "catch" diodes to suppress the inductive
flyback transient voltage normally associated with EMR
coils.
Approvals
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Telecommunications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Energy Meters
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• UL 1577 Approved Component: Pending
• CSA Certified Component: Certificate 1172007
• Certified to:
IEC 60950-1: 2005
EN 60950-1: 2006
TUV Certificate: B 09 07 49410 004
Ordering Information
Part #
CPC1215G
Description
4-Pin DIP (14-Pin Body) (25/tube)
Pin Configuration
14
8
6
2
+
–
Switching Characteristics
of Normally Open Devices
Form-A
IF
90%
10%
ILOAD
Pb
DS-CPC1215-R02
ton
e3
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC1215
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Voltage
Input Power Dissipation
Total Power Dissipation 1
Isolation Voltage, Input to Output
ESD, Human Body Model
Operational Temperature
Storage Temperature
1
Ratings
400
5
15
225
1600
3750
8
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
VP
V
V
mW
mW
Vrms
kV
°C
°C
Derate linearly 16.6 mW / ºC
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous
Peak
On-Resistance 1
Off-State Leakage Current
Switching Speeds
Turn-On (Output Closed)
Turn-Off (Output Open)
Output Capacitance
Input Characteristics
Input Control Voltage
Conditions
Symbol
Min
Typ
Max
Units
VIN=5V
t=10ms
IL=500mA
VL=400VP
IL
ILPK
RON
ILEAK
-
4.15
0.009
500
±1.5
6
1
mArms / mADC
AP

VIN=0V, VL=50V, f=1MHz
ton
toff
COUT
-
1.55
0.42
18
5
3
-
5
-
12
IL=500mA
VIN
VIN=-5V
-
IR
-
1
900
1000
3.75
10
1100
A

-
-
-
1
-
pF
VIN=5V, VL=10V
Recommended Operating Range
Output Closed
Output Open
Reverse Input Current
Input Resistor
Common Characteristics
Capacitance, Input to Output
1
A
ms
pF
V
Measurement taken within 1 second of on-time.
2
www.ixysic.com
R02
INTEGRATED CIRCUITS DIVISION
CPC1215
PERFORMANCE DATA*
Typical VIN for Switch Operation
(N=50, IL=100mA, TA=25ºC)
15
10
5
15
10
5
0
1.19 1.21 1.23 1.25 1.27
LED Voltage to Operate (V)
30
1.29
Typical On-Resistance Distribution
(N=50, VIN=5V, IL=500mA, TA=25ºC)
25
Device Count (N)
Device Count (N)
20
15
10
5
3.95 4.00 4.05 4.10 4.15 4.20 4.25 4.30
On-Resistance (:)
Input Voltage to Operate
vs. Temperature
(IL=75mA)
6
0.38
0.40
0.42 0.44 0.46 0.48
Turn-Off Time (ms)
0.50
Typical Blocking Voltage Distribution
(N=50, VIN=0V, TA=25ºC)
20
15
10
5
450
453
456 459 462 465
Blocking Voltage (VP)
Typical Turn-On Time vs. Input Voltage
(IL=100mA)
468
471
Turn-Off Time vs. Input Voltage
(IL=100mA)
0.50
1.26
3
2
1
0
-20
0
20
40
60
Temperature (ºC)
80
Turn-Off Time (ms)
1.28
4
100
2
3
4
3.5
Turn-On Time (Ps)
4.0
500
490
480
470
460
20
40
60
Temperature (ºC)
80
100
0.35
2
3
4
5
6
7
Input Voltage (V)
1.0
8
9
10
80
100
Typical Turn-Off Time
vs. Temperature
(IL=75mA)
VIN=5V
VIN=10V
500
1.5
0.0
0.40
550
2.0
440
0.45
0.30
10
2.5
0.5
0
9
VIN=5V
VIN=10V
3.0
450
-20
8
Typical Turn-On Time
vs. Temperature
(IL=75mA)
Typical Blocking Voltage
vs. Temperature
510
5
6
7
Input Voltage (V)
Turn-Off Time (Ps)
Turn On Time (ms)
Input Voltage (V)
1.30
1.24
Blocking Voltage (VP)
5
5
1.32
-40
10
0
0
1.22
-40
15
1.190 1.295 1.400 1.505 1.610 1.715 1.820
Turn-On Time (ms)
25
1.34
20
0
0
1.17
Typical Turn-Off Time
(N=50, VIN=5V, IL=100mA, TA=25ºC)
25
Device Count (N)
20
Device Count (N)
Device Count (N)
20
Typical Turn-On Time
(N=50, VIN=5V, IL=100mA, TA=25ºC)
450
400
350
300
250
200
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-40
-20
0
20
40
60
Temperature (ºC)
*The Performance Data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R02
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1215
PERFORMANCE DATA*
4
0.40
0.35
0.30
2
0.25
0
20
40
60
Temperature (ºC)
80
Typical Leakage vs. Temperature
Measured Across Pins 14 & 8
(VL=400V)
70
60
50
40
30
20
10
-20
0
20
40
60
Temperature (ºC)
80
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-0.2
-3
100
Output Capacitance vs. Load Voltage
(VIN=0V, f=1MHz, TA=25ºC)
-2
-1
0
1
Load Voltage (V)
2
3
Energy Rating Curve
3.0
350
2.5
300
250
200
150
100
2.0
1.5
1.0
0.5
50
0
0
0.0
-0.6
400
Output Capacitance (pF)
80
0.2
-0.4
-40
100
Typical Load Current vs. Load Voltage
(VIN=5V, TA=25ºC)
0.4
0.45
3
-20
0.6
Load Current (A)
5
-40
Leakage (nA)
0.55
0.50
IL=200mA
IL=400mA
6
Load Current vs. Temperature
(VIN=5V)
Load Current (A)
7
Load Current (A)
On-Resistance (:)
8
Typical On-Resistance vs. Temperature
(VIN=5V)
0.1
1
10
100
Load Voltage (V)
1000
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
10s
100s
*The Performance Data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R02
INTEGRATED CIRCUITS DIVISION
CPC1215
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1215G
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
CPC1215G
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R02
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1215
MECHANICAL DIMENSIONS
CPC1215G
Pin 14
2.54
(0.100)
Pin 8
PCB Hole Pattern
1.52
(0.060)
9.14
(0.360)
7.62
(0.300)
6.40
(0.252)
Pin 2
Pin 6
3.30
(0.130)
2.03
(0.080)
0.25
(0.010)
DIMENSIONS
mm
(inches)
19.20
(0.756)
7.62
(0.300)
1.30
(0.051)
2.54
(0.100)
12.70
(0.500)
15.24
(0.600)
Hole Size =
0.80
(0.0315)
BASE PLANE
SEATING PLANE
3.30
(0.130)
0.46
(0.018)
0.38
(0.015)
NOTES:
1. Package tolerances to be ±0.05 [0.002] unless otherwise specified.
2. Tolerance of package misalignment or mismatch to be ±0.05 [0.002].
3. General tolerances to be ±0.05 [0.002] unless otherwise specified.
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1215-R02
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/14/2012