MACFM-02A Datasheet

MACFM-02A
Wide Input, AC
Encapsulated EMC
Filter Module
Key Features:
• 85 to 305 VAC Input
• Compact Case
• 20 dB Attenuation
• -40°C to +85°C Operation
• Chassis Mount Option
• DIN Rail Mount Option
• Low Cost
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Input Voltage Range, See Note 1
Nominal Current, See Note 2
Conditions
Min.
85
Typ.
Max.
305
1.5
Units
VAC
A
Min.
Typ.
2,000
Max.
Units
VAC
dB
General
Parameter
Test Voltage
Frequency Attenuation
Conducted Emissions
Conditions
60 Sec, 1 mA Leakage Current
20
EN 55022
Surge
Parameter
Operating Temperature Range
Storage Temperature Range
Cooling
Humidity
Physical
Class B
Criteria B; ±2 kV (1.2 µS/50 µS 2⍀)
EN 61000-4-5
Criteria B; ±4 kV (1.2 µS/50 µS 12⍀)
Conditions
Min.
Typ.
Max.
Units
Ambient
-40
+25
+85
°C
-55
+125
°C
Free Air Convection
RH, Non-condensing
95
%
Module
Chassis (A2) Mount
DIN (A4) Mount
Case Size
Case Material
Module
Chassis (A2) Mount
DIN (A4) Mount
Weight
Notes:
1. The Max input voltage level of the power supply
must be less than the maximum specified input of
the MACFM-02A.
2. The Max input current of the power supply must be
less than the maximum specified nominal current
of the MACFM-02A.
See Mechanical Drawing (Page 2)
See Mechanical Drawing (Page 2)
See Mechanical Drawing (Page 2)
Non-Conductive Black Plastic (UL94-V0)
0.71 Oz (20g)
1.41 Oz (40g)
2.11 Oz (60g)
Schematic
MACFM-02A filter modules operate
with many standard MPD AC/DC
power supplies.
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
With these modules, most AC power
supplies will meet the surge requirements
of EN 61000-4-5 and the EMS requirements of EN 55022. Contact the factory
for information on our full range of filter
products.
Typical Connection
T: (781) 344-8226
F: (781) 344-8481
E: [email protected]
W: www.micropowerdirect.com
www.micropowerdirect.com
www.micropowerdirect.com
Mechanical Dimensions
Pin Connections
Pin
1
2
3
4
5
Function
GND
IN(N)
IN(L)
OUT(L)
OUT(N)
Mechanical Dimensions: With Chassis Mount Option (A2)
The MACFM-02A is available mounted on an adapter plate for mounting to a
chassis or on a DIN rail. Mechanical dimensions for these adapters are shown at right.
The photo below shows a product mounted on a similar adapter. Please contact the
factory for more information.
For the chassis mount option, add suffix “A2” to the
model number (i.e. MACFM-02A-A2)
For the DIN rail mount option, add suffix “A4” to the
model number (i.e. MACFM-02A-A4)
Pin Connections
Pin
1
2
3
4
5
Mechanical Dimensions: With DIN Rail Option (A4)
Function
GND
IN(N)
IN(L)
OUT(L)
OUT(N)
Connection is the
same for A2 & A4
MicroPower Direct
We Power Your Success - For Less!
292 Page Street Ste D Stoughton, MA 02072
•
TEL: (781) 344-8226
•
Notes:
• All dimensions are typical in inches (mm)
• Tolerance x.xx = ±0.02 (±0.50)
• Wire range for A2 & A4 connection is 24 - 12 AWG
FAX: (781) 344-8481
•
E-Mail: [email protected]