SURFACE MOUNT POWER INDUCTOR P1326P SERIES • High energy storage, low resistance • Extra low core loss • Excellent heat dissipation • Operating temperature range: -40°C to +85°C • Custom design available upon request • RoHS compliant product ELECTRICAL PARAMETERS @ 25°C Part Number Inductance (µH) (±10%) Idc (A) (MAX) 470 47 10.5 13 680 68 9.0 17 P1326P- DCR (mΩ) (MAX) 101 100 7.5 25 151 150 6.0 38 221 220 5.0 50 331 330 4.0 80 471 470 3.5 100 681 680 3.0 135 Note: 1. Inductance measured: 100KHz, 0.1Vrms 2. Idc: ΔL 25% typical from initial value or ΔT 40°C typical from ambient temp, whichever is sooner DIMENSIONS (mm) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.008 .XXX : ±0.004 mm: X,X : ±0,20 X,XX : ±0,10 www.mpsind.com [email protected]