POWER INDUCTOR P1108 SERIES • • • • • • • • • Power Inductors for Digital Amplifiers Made with flat wire for compact size Low radiation noise due to magnetically shielded construction Small, low resistance and high current Operating Frequency up to 1MHz Inductance range from 10μH to 22μH Operating Temperature -40ºC to +125ºC RoHS Compliant Product Custom Design Available ELECTRICAL PARAMETERS @ 25°C P1108- L (μH) ±20% DCR (mΩ) MAX ISAT (A) MAX IRMS (A) MAX W DIM (mm) ±0.5 P DIM (mm) ±0.3 T DIM (mm) ±0.1 100M 10 12.3 13.5 6.2 7.6 3.3 0.50 200M 22 17.5 9.0 5.1 9.6 4.4 0.50 Part Number Note: 1. Inductance measured @ 1KHz 0.10VRMS 2. ISAT: Inductance drops 25% max from initial value 3. IRMS: ΔT of 40°C rise max from ambient temperature 4. Inductance tolerance M=20% 5. Suffix letter represent standard tolerance 6. Marking: Value of Inductance DIMENSIONS (mm) Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 SCHEMATIC Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]