GS15E 15W AC-DC Industrial Adaptor series ■ Features : Universal AC input / Full range No load power consumption <0.075W Energy efficiency Level Ⅵ Comply with EU ErP and meet CoC version 5 2 pole EURO plug Class II power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS15E-1P1J GS15E-11P1J GS15E-2P1J GS15E-3P1J GS15E-4P1J GS15E-5P1J GS15E-6P1J GS15E-1 GS15E-1-1 GS15E-2 GS15E-3 GS15E-4 GS15E-5 GS15E-6 GS15E-8 7.5V 9V 12V 15V 18V 24V 48V 0.31A Note.2 5V GS15E-8P1J RATED CURRENT 2.40A 1.60A 1.66A 1.25A 1.00A 0.83A 0.62A CURRENT RANGE 0 ~ 2.40A 0 ~ 1.60A 0 ~1.66A 0 ~ 1.25A 0 ~ 1.00A 0 ~ 0.83A 0 ~ 0.62A 0 ~ 0.31A RATED POWER 12W 12W 15W 15W 15W 15W 15W 15W RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% LINE REGULATION Note.5 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.6 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% 85% 85% 85% 85% 85.5% 87% SETUP, RISE, HOLD UP TIME 3000ms, 50ms, 16ms at full load 90 ~ 264VAC 135 ~ 370VDC VOLTAGE RANGE INPUT FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT INRUSH CURRENT (max.) 0.5A / 100VAC 50A / 230VAC LEAKAGE CURRENT(max.) 0.25mA / 240VAC OVERLOAD WORKING TEMP. 105 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +50℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing PROTECTION OVER VOLTAGE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 7) EMC EMISSION EMC IMMUNITY MTBF DIMENSION OTHERS PACKING PLUG CONNECTOR CABLE NOTE 82.5% -20 ~ +85℃, 10 ~ 95% RH ±0.03% / ℃ (0 ~ 40℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN60950-1 approved I/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 Class B, EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A 500Khrs min. MIL-HDBK-217F(25℃) 34*71*50mm (L*W*H) 180g ; 60pcs / 12Kg / CARTON See page 2 ; Other type available by customer requested See page 2 ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:GS15E-SPEC 2015-09-15 GS15E 15W AC-DC Industrial Adaptor Mechanical Specification series Unit:mm UL1185 18AWG 1200 +150/-0mm for 5~15V UL1185 18AWG 1800 +150/-0mm for 18~48V 50±1 70±1 19±0.5 4ψ±0.05 71.5±1 11±0.5 34±1 C"+" ID 2.1 x OD 5.5 Outside 34.5 Inside Plug Assignment NAME PLATE Standard plug: P1J 22 P1J 18.6 28 Derating Curve P/N OUTPUT CENTER + Static Characteristics 100 90 LOAD (%) LOAD (%) 100 70 80 70 60 50 40 0 10 20 30 40 AMBIENT TEMPERATURE (℃) 50 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS15E-SPEC 2015-09-15