480W Single Output Industrial DIN RAIL NDR-480 series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 ■ Features Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage ■ Applications Industrial control system Factory automation Electro-mechanical apparatus / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 years warranty ■ Description NDR-480 is one economical slim 480W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 85.5mm in width, which allows space saving inside the c a b i n e t s . T h e e n t i r e s e r i e s a d o p t s th e f u l l r a n g e AC i n p u t f r o m 9 0 V A C t o 2 6 4 V A C a n d c o n f o r m s t o EN61000-3-2, the norm the European Union regulates for harmonic current. NDR-480 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 92.5%, the entire series can operate at the ambient temperature between -20℃ and 70℃ under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV EN60950-1, and etc.) make NDR-480 a very competitive power supply solution for industrial applications. ■ Model Encoding NDR - 480 - 24 Output voltage Output wattage Series name File Name:NDR-480-SPEC 2015-05-23 NDR-480 480W Single Output Industrial DIN RAIL series SPECIFICATION MODEL OUTPUT NDR-480-24 NDR-480-48 DC VOLTAGE 24V 48V RATED CURRENT 20A 10A CURRENT RANGE 0 ~ 20A 0 ~ 10A RATED POWER 480W 480W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 48 ~ 55V ±1.0% 24 ~ 28V VOLTAGE TOLERANCE Note.3 ±1.0% LINE REGULATION ±0.5% LOAD REGULATION ±1.0% SETUP, RISE TIME 1500ms, 100ms/230VAC 16ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT Note.4 90 ~ 264VAC 47 ~ 63Hz PF>0.98/115VAC, PF>0.94/230VAC at full load EFFICIENCY (Typ.) 92.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 4.8A/115VAC 20A/115VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 130% rated output power 92.5% 2.4A/230VAC 35A/230VAC Protection type : Constant current limiting, unit will shut down after 3 sec., re-power on to recover OVER VOLTAGE 29 ~ 33V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +70℃ (Refer to "Derating Curve") EMC IMMUNITY MTBF DIMENSION PACKING NOTE 16ms/115VAC at full load 127 ~ 370VDC POWER FACTOR (Typ.) WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS ±1.0% 3000ms, 100ms/115VAC at full load FREQUENCY RANGE OVERLOAD PROTECTION ±0.5% 56 ~ 65V 20 ~ 95% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 UL508, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A 146.8K hrs min. MIL-HDBK-217F (25℃) 85.5*125.2*128.5mm (W*H*D) 1.5Kg; 8pcs/13Kg/0.9CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended. 5. Derating may be needed under low input voltage. Please check the derating curve for more details. 6. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) File Name:NDR-480-SPEC 2015-05-23 NDR-480 480W Single Output Industrial DIN RAIL series Block Diagram PFC fosc : 85KHz PWM fosc : 65KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V O.C.P. UVP O.L.P. FG PFC CONTROL DETECTION CIRCUIT PWM CONTROL O.V.P. O.T.P. Derating Curve Output derating VS input voltage 100 100 90 80 80 70 50 LOAD (%) LOAD (%) 60 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 70 (VERTICAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz File Name:NDR-480-SPEC 2015-05-23 NDR-480 480W Single Output Industrial DIN RAIL series Mechanical Specification Case No.984D Unit:mm Top View 85.5 128.5 12 3 4 125.2 39 TB2 DC OK + Side View +V ADJ TB1 1 2 3 Front View Side View Terminal Pin No. Assignment (TB1) Pin No. 1 2 3 Assignment FG AC/N or DC AC/L or DC + Terminal Pin No. Assignment (TB2) Pin No. 1,2 3,4 Assignment DC OUTPUT +V DC OUTPUT-V Bottom View Installation Instruction 35 This series fits DIN-RAIL TS35/7.5 or TS35/15. For installation details, please refer to the USER MANUAL on http://www.meanwell.com/search/NDR-480/NDR_manual.pdf ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 (For reference only. Not included with unit.) Back View File Name:NDR-480-SPEC 2015-05-23