Micross RetailPlus Flyer

MYXN25Q512A13G12
Serial NOR Flash Memory
512Mb, 3V, Multiple I/O, 4KB Sector Erase
Preliminary information. Subject to change without notice.
Features
• Software reset
• Tin-lead ball metallurgy
• Additional reset pin for selected part numbers
• Stacked device (two 256Mb die)
• Write protection
ƒƒ Software write protection applicable to every
64KB sector via volatile lock bit
ƒƒ Hardware write protection: protected area size
defined by five nonvolatile bits (BP0, BP1, BP2,
BP3, and TB)
ƒƒ Additional smart protections, available upon
request
• SPI-compatible serial bus interface
• Double transfer rate (DTR) mode
• 2.7–3.6V single supply voltage
• 108 MHz (MAX) clock frequency supported for all
protocols in single transfer rate (STR) mode
• 54 MHz (MAX) clock frequency supported for all
protocols in DTR mode
• Dual/quad I/O instruction provides increased
throughput up to 54 MB/s
• Supported protocols
ƒƒ Extended SPI, dual I/O, and quad I/O
ƒƒ DTR mode supported on all
• Execute-in-place (XIP) mode for all three protocols
ƒƒ Configurable via volatile or nonvolatile registers
ƒƒ Enables memory to work in XIP mode directly
after power-on
• PROGRAM/ERASE SUSPEND operations
• Available protocols
ƒƒ Available READ operations
ƒƒ Quad or dual output fast read
ƒƒ Quad or dual I/O fast read
• Flexible to fit application
ƒƒ Configurable number of dummy cycles
ƒƒ Output buffer configurable
• Erase capability
ƒƒ Subsector erase 4KB uniform granularity blocks
ƒƒ Sector erase 64KB uniform granularity blocks
ƒƒ Single die erase
• Electronic signature
ƒƒ JEDEC-standard 2-byte signature (BA20h)
ƒƒ Unique ID code (UID): 17 read-only bytes,
including: Two additional extended device ID
bytes to identify device factory options; and
customized factory data (14 bytes)
• Minimum 100,000 ERASE cycles per sector
• More than 20 years data retention
Options
Code
• Packages
ƒƒ T-PBGA-24b05/6mm x 8mm
(also known as TBGA25), with
Sn63/Pb37 ball metallurgy
12
• Temperature Ranges
ƒƒ Industrial (-40°C to 85°C)
IT
ƒƒ Automotive (-40°C to 125°C)
AT
• Part Marking: Label (L), Dot (D)
• 3-byte and 4-byte addressability mode supported
ƒƒ 64-byte, user-lockable, one-time programmable
(OTP) dedicated area
Micron Part. No. N25Q512A13G1240E
April 15, 2015 • Revision 1.8
Micross US (Americas) 407.298.7100 • Micross UK (EMEA & ROW) +44 (0) 1603 788967 • [email protected] • www.micross.com
Form #: CSI-D-686 Document 002
512Mb, Multiple I/O Serial Flash Memory
Signal
MYXN25Q512A13G12 • 512Mb, 3V, Multiple I/O, 4KB Sector
EraseAssignments
Advanced information. Subject to change without notice.
Figure 4: 24-Ball TBGA (Balls Down)
Figure 1:
24-Ball TBGA Top View (12)
1
2
3
4
5
A
NC
NC
RESET/NC
NC
NC
C
VSS
VCC
NC
NC
S#
NC W#/VPP/DQ2 NC
NC
DQ1
NC
NC
B
C
D
512Mb,
Multiple I/O Serial Flash Memory
DQ0 HOLD#/DQ3 NC
Package Dimensions
E
NC
NC
NC
512Mb, Multiple I/O Serial Flash Me
Package Dimen
Figure 49: T-PBGA-24b05/6mm x 8mm
Figure 49: T-PBGA-24b05/6mm x 8mm
1. See Part Number Ordering Information for complete package names and details. Ball A4
is NC except for part
numbers
N25Q512A83G1240X for which it is used as a RESET pin.
0.79
TYP
Note:
Figure 2: Seating
plane
T-PBGA 6mm x 8mm
A
0.79 TYP
0.1 A
Seating
plane
A
0.1 A
24X Ø0.40 ±0.05
Ball A1 ID
5
4
3
2
Ball A1 ID
1
Ball A1 ID
24X Ø0.40 ±0.05
5
4
3
2
Ball A1 ID
1
A
B
C
4.00
8 ±0.10
B
D
1.00 TYP
4.00
A
C
E
8 ±0.10
D
1.00 TYP
E
1.00 TYP
1.20 MAX
4.00
6 ±0.10
Notes:
0.20 MIN
1.00 TYP
Notes: 1. All dimensions are in millimeters.
2. Solder ball material:
Sn63/Pb37
1.20 MAX
3. Micron N25Q512A13G12
0.20 MIN
4.00
1. All dimensions are in millimeters.
2. See Part Number Ordering Information for complete package names and details.
6 ±0.10
April 15, 2015 • Revision 1.8
PDF: 09005aef84752721
n25q_512mb_1ce_3V_65nm.pdf - Rev. P 7/13 EN
Notes:
1. All dimensions are in millimeters.
2. See Part Number Ordering Information for complete package names and details.
Micross US (Americas)
• Inc.
407.298.7100
Micron Technology,
reserves the right to change products [email protected]
specifications without notice.
9
© 2011 Micron Technology, Inc. All rights reserved.
Micross UK (EMEA & ROW) • +44 (0) 1603 788967
www.micross.com
Form #: CSI-D-686 Document 002