Datasheet OptiDriver™ 100G Muxponder Module Highlights Flexible 10G/40G to 100G OTU4 OTN Muxponder Pluggable optics based Arbitrary mix of 10G and 40G client signals Ten SFP+ 10G and two QSFP+ 40G interfaces Configurable FEC options Comprehensive performance monitoring Overview The OptiDriver™ product line is the most recent addition to MRV’s comprehensive family of advanced optical transport network elements. Designed to offer the industry’s highest density 10 Gbps transport, OptiDriver is also engineered to support the latest advances in optical technologies, including intelligent ROADM networks and 100 Gbps transport. OptiDriver is designed from the ground up to reduce capital and operational expenses. A flexible shelf and component architecture dramatically lowers initial and ongoing hardware costs, simplifies operations, and minimizes power and space requirements. Multifunction hardware allows a minimum number of components to serve the maximum variety of applications, including Ethernet, OTN, TDM (T1/E1 to 100G), Fibre Channel, ESCON/FICON, Infiniband, and others. Built-in testing and rapid turn up features lower the operational cost of installation and significantly decrease time to revenue. OptiDriver is fully integrated into MRV’s advanced Pro-Vision® service provisioning and management platform, which operates seamlessly in a mixed network of MRV’s Optical and Carrier Ethernet systems. Built-in processing support for current and emerging intelligent control plane technologies like GMPLS and Software Defined Networking allows OptiDriver to quickly integrate into new and existing networks. OptiDriver 100G Solutions OptiDriver’s 100 Gbps solutions are based on pluggable optics and offer the same multi-function flexibility that is standard in other OptiDriver modules. The exclusive use of pluggable optics (SFP+, QSFP+, and CFP) ensures that OptiDriver’s solutions are optimized for current and future technologies and can immediately take advantage of advances in applications, span budget, and fiber capacity. By focusing on standard interfaces, OptiDriver can interface seamlessly with other standards-based solutions today and as standards progress. All 100 Gbps solutions from MRV offer a choice of pluggable CFP line side optics based on distance and capacity requirements. “Gray” (non-DWDM) optics are typically used in shorter reach applications. Gray optics operate over a single fiber pair, cannot be combined with other services on the same fiber, and are most appropriate for short distance, dedicated fiber interconnects. Metro DWDM optics operate over four DWDM wavelengths (4 x 25 Gbps) and are a potential solution for operation on a fiber with a mix of other services. Coherent DWDM optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM optics can greatly increase the capacity and reach of an optical network. 100G Multiprotocol Multirate Muxponder The OptiDriver 100G Multiprotocol Multirate Muxponder is optimized for high-capacity optical transport networks migrating to 100G and data center or enterprise networks with significant investment in 10G and 40G router ports. The muxponder supports a wide variety of client services and protocols, including 40G LAN, 10G LAN/WAN, STM64/OC-192, and 8G/10G Fibre Channel. OptiDriver’s 100 Gbps muxponder card cost-effectively supports an arbitrary mix of 10 Gbps and 40 Gbps client interfaces, up to a total of 100 Gbps. For customers with a large number of 10 Gbps services in their network, the 100Gbps muxponder is an efficient way to combine ten 10 Gbps services into a single 100 Gbps service on the line side. For customers with a mix of 40 Gbps and 10 Gbps services, the 100 Gbps muxponder can flexibly carry any mix of services without the need to pre-plan the network or replace hardware for different mixes. 1 Datasheet The 100G CFP-based 100G aggregated interface allows MRV’s 100G Muxponder to cover a wide variety of applications ranging from multi-protocol aggregation over a dedicated fiber using 100GBase-LR4 or 100GBase-ER4 CFPs to complex DWDM networks employing metro or coherent CFP pluggable transceivers. By designing the 100G interface around standard CFP optics, the 100G Muxponder can take advantage of technical innovations in the rapidly changing 100G optics market. Rather than forcing network operators to make a 100G optics decision today that will be expensive to change, 100G pluggable optics give network operators the ability to adapt with changing technology. MRV’s 100G muxponder offers a range of performance monitoring and enhancement features to make deployment and network planning simple. A choice of FEC encoding allows network operators to optimize designs for distance, BER, or latency. Comprehensive performance monitoring is available at the OTN layer, the client interfaces, and through digital diagnostics on the pluggable optics. The 100G muxponder also offers a built-in testing capability that can generate and analyze a PRBS test signal. Coupled with the ability to initiate loopbacks at all optical interfaces, this capability allows network operators to set up and test their 100G solutions definitively and quickly, significantly reducing startup time and time to market. Exceptionally low density and power consumption allows the OptiDriver 100G Muxponder to meet market demands for rack space savings and efficient power consumption, resulting in lowered total cost of ownership. Operating Specifications Optical Parameter Value 100G Interface OTU4 FEC None, Zero FEC, GFEC (6.2 dB), HFEC 7% ( 9.4 dB) 10G Interface 10G Ethernet LAN/WAN, 8G/10G Fibre Channel, STM64/OC-192, OTU2/OTU2e/OTU1e/OTU1f SFP+ 40G Interface 40GBASE-SR4/LR4, OTU3, OTU3e QSFP+ CFP Physical Parameters Operating Temperature 0°C to 50°C (32°F to 122°F) Storage Temperature -40°C to 70°C (-40°F to 158°F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 214 mm x 50.8 mm x 225 mm (8.5”x 2.0” x 9.0”) Weight 1588 g (3.5 lb) Power consumption Typical 70 W, max 75 W Regulatory Compliance FCC Part 15, Class A; IC, Class A; EMC Directive: Emission (Class A) and Immunity, WEEE Directive: Wheelie Bin Mark; RoHS 2 Directive; China RoHS MRV operates Worldwide sales and service offices across four continents. Contact us at [email protected] MRV Communications Corporate Headquarters 300 Apollo Drive Chelmsford, MA 01824 http://www.mrv.com All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-OD-100GMuxponder-012814 3020221-001 Rev. A1 Copyright ©2014 MRV Communications, Inc. All Rights Reserved.