PDRx Main features Fully welded version Robust stainless steel housing High overpressure resistance Excellent long term stability Applications Hydraulic Measuring range 0 … 60 bar up to 0 … 1600 bar Long term stability ≤ ± 0.1% FS / Year Accuracy (20 °C) ≤ ± 0.5% FS, 0.3% FS (Linearity, hysteresis, repeatabillity, error of span) Technical specifications Measuring principle Resistive thin film Measuring ranges 0 … 60 bar up to 0 … 1600 bar Type of pressure Relative Accuracy (20 °C) ≤ ± 0.5% FS, 0.3% FS (Linearity, hysteresis, repeatabillity, error of span) Error of zero point 4...20 mA 0...10 V ≤ ± 1% FS ≤ ± 0.2% FS Zero thermal drift ≤ ± 0.3% FS/10 K Span thermal drift ≤ ± 0.3% FS/10 K Long term stability ≤ ± 0.1% FS / Year Response time (10 … 90%) ≤ 1 ms Process connections See page 3 Environment -40 ... + 85°C -25 ... + 85°C -25 ... + 85°C IP67 Vibration IEC60068-2-6 1.5 mm p-p (10 – 57 Hz), 10 g (58 Hz – 2 KHz) 10 cycles within 2.5 h per axis Shock IEC60068-2-27 50 g/11 ms 100 g/6 ms 10 x Imp. per Axis and direction Bump IEC60068-2-27 100 g/2 ms 4000 x Imp. per Axis and direction Random IEC60068-2-64 0.1 g2/Hz (20 Hz – 1 KHz) 30 min per axis (>10 g RMS) Electrical specification Output signal / Power supply Load impedance Current ouput Voltage ouput 4 … 20 mA / 10 … 33 VDC 0…10 V / 14 … 33 VDC RΩ = (Usupply-10 V) / 20 mA > 5 KΩ Insulation resistance >100 MΩ at 250 VDC Electrical connections See page 3 Material Process connection SS 1.4301 AISI 304 Housing SS 1.4301 AISI 304 Diaphragm SS 1.4542 AISI 630 Sealing NBR Approvals CE conformity EMC directive 2004/108/CE in accordance with EN61000-6-2, EN 61000-6-3 2013-04-17 Temperature Storage Medium Ambient Protection rating Design and specifications subject to change without notice Main characteristics www.baumer.com Data sheet A11.41 Page 1 / 4 PDRx Measuring ranges and overpressure safety Pressure in bar Pressure range 0 ... 60 Over pressure 120 200 320 500 800 1200 2000 3200 Burst pressure 480 800 1280 2000 3200 4000 4000 4000 0 ... 160 0 ... 250 0 ... 400 0 ... 600 0 ... 1000 0 ... 1600 2013-04-17 Design and specifications subject to change without notice 0 ... 100 www.baumer.com Data sheet A11.41 Page 2 / 4 PDRx Electrical connections Signal at 4...20 mA / Signal at 0...10V Signal at 4...20 mA / Signal at 0...10 V Connector DIN 43650 M12 4-pins +VS / +VS 3 IOUT / GND n.c. / +VOUT 4 1 3 2 n.c. / +VOUT IOUT / GND +VS / +VS 1 2 n.c. / n.c. earth earth Dimensions (mm) Cable output Field housing (Red) / +VS / +VS M12 4 pins IP67 (Blue) / IOUT / GND (White) / n.c. / +VOUT Not included in delivery clamping range: 8...10 mm n.c. / +VOUT 4 3 2 1 IOUT / GND +VS / +VS (Shield) / earth 48 (Shield) / earth ø 18,8 Code S14 Code E101 Code E002 Code E102 ø G 1/4 5 G 1/4 ø 18,9 ø 26,5 35,5 M12 x 1,5 M12 x 1,5 ø 18,9 Design and specifications subject to change without notice 5 Code E107 2 12 21 3 16 23 12 3 23 16 21 2 Code E001 ø 4,6 M14 x 1,5 ø 18,9 G1/2" DIN 3852 E (HEX 19) M12x1.5 EN837 (HEX 19) M12x1.5 DIN 3852 E (HEX 19) M14x1.5 cone 60° (HEX 19) 2013-04-17 G1/4" EN 837 (HEX 19) www.baumer.com Data sheet A11.41 Page 3 / 4 PDRx Ordering details PDRx PDR Model Pressure transmitter xxxx xxx x xx B D P ≤ 1000 bar P ≤ 600 bar P ≤ 1000 bar P ≤ 600 bar P ≥ 1000 bar E001 E002 E101 E102 E107 Output connection M12, 4 pins S14 Accuracy 0.5% FS 0.3% FS C B Pressure range and unit in bar 0...60 0...100 0...160 0...250 0...400 0...600 0...1000 0...1600 360 410 416 425 440 460 510 516 In combination with process connection code E001/E002/E101/E102 DE 2013-04-17 Design and specifications subject to change without notice Damping element Without damping element With damping element xxx PDR Output signal 4 ... 20 mA 0 ... 10 V Process connection G¼ EN 837 G¼ DIN 3852 with sealing M12x1.5 EN 837 M12x1.5 DIN 3852 with sealing M14x1.5 cone 60° x www.baumer.com Data sheet A11.41 Page 4 / 4