TELEPHONE: (973) 376-2922 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. (212)227-6005 FAX: (973) 376-8960 MUR3030PT Ultrafast Recovery Rectifier FEATURES • • • • • Ultrafast Recovery Time i_uw rurwaiu vuuaye Low Leakage Current 175°C Operating Junction Temperature High Temperature Glass Passivated Junction II I MECHANICAL CHARACTERISTICS • Case: Epoxy, Molded • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260 °C Max. for 10 Seconds 1 bl —o : .4 ^ TO-3PN package 2 3 & APPLICATIONS • Designed for use in switching power supplies, inverters and as freewheeling diodes. "a •- —-c-»- fuQfiT-™ it Up" I r f K -*"!i— L ABSOLUTE MAXIMUM RATINGS(Ta=25'C) SYMBOL PARAMETER VALUE UNIT Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage 300 V Ip(AV) Average Rectified Forward Current Per Leg (Rated VR) Total Device 15 30 IFM Peak Repetitive Forward Current (Rated VR, Square Wave,20kHz) Per Diode Leg 30 Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60Hz) 150 A -65-175 °C VRRM VRWM VR IFSM Tj Junction Temperature A -*•-*- J mm DIM WIN A 19.90 B 15.38 C 4.75 n A E F G H J K I N Q R s Tstg Storage Temperature Range -65-175 'C •—•••»- 0 -N-t- y Y 0.90 1.90 3.40 2.98 3.20 0.595 19.95 1.98 10.89 4.95 3.35 1.995 5.90 9.90 MAX 20.10 15.42 4.85 1.10 2.10 3:60 3.02 3.40 0.605 20.25 2.02 10.91 5.05 3,45 2.005 6.10 10.10 NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors Ultrafast Recovery Rectifier MUR3030PT THERMAL CHARACTERISTICS SYMBOL Rth j-c PARAMETER Thermal Resistance.Junction to Case MAX UNIT 1.5 r/w ELECTRICAL CHARACTERISTICS(Ta=25'C) (Pulse Test: Pulse Width=300 u s.Duty Cycle«:2%) SYMBOL PARAMETER CONDITIONS VF Maximum Instantaneous Forward Voltage IF= 15A IR Maximum Instantaneous Reverse Current VRRM= 300V trr Maximum Reverse Recovery Time IF= 0.5A, IR= 1A, lrr= 0.25A MAX UNIT 1.68 V 5 uA 60 ns