ro aucti, One. j 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 MBR030 MBR040 Advance Information SCHOTTKY RECTIFIERS SWITCHMODE RECTIFIERS 0.5 AMPERE 30-40 VOLTS ... designed for use in switching power supplies, inverters, and as free wheeling diodes, these devices have the following features: • Low Forward Voltage • Low Leakage Current • DO-204AH (DO-35) Glass Package ,© MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Vollaga Average Rectified Forward Current (Rated VR) TL - 90°C, L = %• TA - WC, L - W, (Mt. Method #11 Nonrepetitlve Peak Surge Current (Surge applied at rated load conditions halrwave, single phase, 60 Hi} Symbol MBR030 MSR040 Unit VRRM VRWM VR IFIAVJ 30 40 Volts OH Amps IFSM Amps -15.0- -65 to +160 Operating junction and Storage Temperature THERMAL CHARACTERISTICS CharacterMk Thermal Resistance, Junction to Lead = W Symbol Typ Max Unit RftJL 180 190 °c/w Symbol TYP Max Unit ELECTRICAL CHARACTERISTICS Chtraeurlitlc Instantaneous Foward Voltage (1) (IF - 0.1 A, Tj - 26°C) (ip - 0.5 A, Tj - 25'C) VF Reverse Current (Rated dc Voltage, Tj = 1SO°C) (Rated dc Voltage, Tj = 25°C) iR MIU1I ETERt MIN. INC HES MAX MAX 1 MN A 3.05 ?•$ 0.120 0.200 |.SZ 113 1090 0.1X0 » o.« 0.022 D -SSL 0.011 _ — 127 0..050 F IS*) 38.10 1.500 1.000 K Al JEMC dminilaii ind ruin ipfty. NOTES: 1. PACKAGE CONTOUR OPTIONAL WITHIN A AND B. HEAT SLUGS, IF ANY. SHALL BE INCLUDED WITHIN THIS CYLINDER. BUT NOT SUBJECT TO THE MINIMUM LIMIT OF 8. 2. LEAD DIAMETER NOT CONTROLLED IN ZONE F TO ALLOW FOR FLASH. LEAD FINISH BUILDUP AND MINOR IRREGULARITIES OTHER THAN HEAT SLUGS. 3. POLARITY DENOTED BY CATHODE BAND. «. DIMENSIONING AND TOLERANCING PER ANSI Y14.5.1873. MECHANICAL CHARACTERISTICS Volts 0.460 0.610 0.600 0.760 0.6 0.003 1.0 0.001 CASE: Glass FINISH: External leads are plated and are readily solderable mA (t) Pulie T«it: Pulsa Width =• 300 »a. Duty Cycls «. 2.0%. This document contains Information on a new product. Specifications and information herein are subject to change without notice. POLARITY: Cathod indicated by polarity band. WEIGHT: 0.2 Gram (approximately). MAXIMUM LEAD TEMPERATURE FOR SOLDERINQPURPOSES: 230'C. tt'fromcaietbr 10 seconds. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished b> NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Ounlih/