., U na. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. S2200(2N3528, 2N3529,2N4102), S2710, S2700(2N3228,2N3525,2N4101, Series 5-A Silicon Controlled Rectifiers CONTROLLED. F E C T I F I E R T Y P E S 2H3528 2N3529 2H3228 f 2N3525 t z N ^ l O l S2710B S?710B S2710M RATINGS Transient Peak Reverse Voltage (Non-Repetitive), voij(nc<v(ep) ••" UNITS 2N4102 TERMINAL CONNECTIONS 330 660 - 700 330 660 700 volts Ptik Reverse Voltage (Repetitive), Y^frep) 200 400 * 600 200 400 600 volts Peak Forward Blocking Voltage (Repelitivi), VFBOM'"P) 200 400 600 200 400 600 volts 3,2 5.0 32 5,0 32 5,0 CATMOOt Forward Current: For case temperature (!Q) of * 75°C, and unit mounted on neat sinkAverage DC value at a conduction angle of 180*, ICAV lvalue, IF RMS For other conditions, See Fig. 2 For Iree-air temperature (Tp^) o( 25°C, and with no heat sink employed Avenge DC value at a conduction antle of 180° IFAV RMS value, Icou? BOTTOM VIEW amperes amperes JEDEC TO-46 CATHODE » ** 17 17 1.7 e 13 20 13 2,0 13 20 amperes amperes For other conditions, See Flgt 3 & * ANOOC IHCAT Peak Surge Current, ip^lsurgt) : For one cylce of applied principal voltage,, 60 Hz (sinusoidal), Tc - 75°C 50 Hz (sinusoidal), TC - 75°C For more than one cycle of applied voltage Fusing Current (for SCR protection), Tj - -40 to 100°C, t " 1 to 8.3 ni. I2t Rate of Change of Forward Current, di/dt BOHOMVIEW 60 50 60 50 See Fig 5 See Fig 5 15 15 200 ?00 Vpg • vgooOmn. vilue.) IQT • 200mA, O.$j**ris« time 66 *nh HMI Rjdn ampere: ampere' CitMOM ampere? second OATC amperes/ microsecond « K i I'NI BOTTOM VIEW JEDEC Gate Power*: Peak, Forward or Reverse, lor 10 n\, PQ^ , (See Figs, 7 and 9) Average, PGAV Temperature: Storage, TJ(J Opeiatinj (Case), TQ 13 13 watts 05 0,5 watt -40lo '125 -40 to • 100 oc »C - -. . . . -<0lo*125 - W l o »100 TO-I -* NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to.be both accurate and reliable at the time of going to press. However. NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors