HD74HC4543 BCD-to-Seven Segment Latch/Decoder/Driver REJ03D0655-0200 (Previous ADE-205-544) Rev.2.00 Mar 30, 2006 Description This circuit contains a 4-bit latch, BCD-to-7 segment decoder, and 7 output drivers. Data on the input pins flow through to the output when the Latch Disable (LE) is high and is latched on the high to low transition of the LE input. The Phase input (Ph) controls the polarity of the 7 segment outputs. When Ph is low the outputs are true 7 segment, and when Ph is high the outputs are inverted 7 segment. When the Phase input is driven by a liquid crystal display (LCD) backplane waveform the segment pins output the correct segment waveform for proper LCD AC drive voltages. In addition a Blanking input (BI) is provided, which will blank the display. Features • • • • • • High Speed Operation: tpd (A, B, C, D to a – g) = 33 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Ordering Information Part Name Package Type HD74HC4543P DILP-16 pin HD74HC4543FPEL SOP-16 pin (JEITA) HD74HC4543RPEL SOP-16 pin (JEDEC) Package Code (Previous Code) PRDP0016AE-B (DP-16FV) Taping Abbreviation (Quantity) P — PRSP0016DH-B (FP-16DAV) FP EL (2,000 pcs/reel) PRSP0016DG-A (FP-16DNV) RP EL (2,500 pcs/reel) Note: Please consult the sales office for the above package availability. Rev.2.00 Mar 30, 2006 page 1 of 8 Package Abbreviation HD74HC4543 Function Table LD X H H H H H H H H H H H H H H H H L Inputs D X L L L L L L L L H H H H H H H H X 1 BI H L L L L L L L L L L L L L L L L L Ph* L L L L L L L L L L L L L L L L L L C X L L L L H H H H L L L L H H H H X B X L L H H L L H H L L H H L L H H X A X L H L H L H L H L H L H L H L H X a L H L H H L H H H H H L L L L L L b L H H H H H L L H H H L L L L L L c L H H L H H H H H H H L L L L L L d L H L H H L H H L H H L L L L L L *2 Outputs e L H L H L L L H L H L L L L L L L f L H L L L H H H L H H L L L L L L g L L L H H H H H L H H L L L L L L Display Blank 0 1 2 3 4 5 6 7 8 9 Blank Blank Blank Blank Blank Blank *1 Notes: 1. For liquid crystal readouts, apply a square wave to Ph. For common cathode LED readouts, select Ph = L. For common anode LED readouts, select Ph = H 2. Depends upon the BCD coder previously applied when LD = H a f g e b c d Pin Arrangement Latch Disable 1 C 2 C B 3 D 16 VCC LD f 15 f B g 14 g 4 D e 13 e A 5 A d 12 d Phase 6 Ph c 11 c Blanking 7 Bl b 10 b GND 8 a 9 (Top view) Rev.2.00 Mar 30, 2006 page 2 of 8 a HD74HC4543 Logic Diagram Phase Blanking A IN Q a LD Q IN Q B b c LD Q IN Q LD Q IN Q d C e D f LD Q g Latch Disable Absolute Maximum Ratings Item Supply voltage range Input / Output voltage Symbol VCC VIN, VOUT Ratings –0.5 to 7.0 –0.5 to VCC +0.5 Unit V V Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature IIK, IOK IOUT ICC or IGND PT Tstg ±20 ±25 ±50 500 –65 to +150 mA mA mA mW °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.2.00 Mar 30, 2006 page 3 of 8 HD74HC4543 Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Symbol VCC VIN, VOUT Ta Input rise / fall time*1 Ratings 2 to 6 0 to VCC –40 to 85 0 to 1000 0 to 500 tr, tf Unit V V °C ns 0 to 400 Note: Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Item Input voltage Output voltage Symbol VCC (V) Min Ta = 25°C Typ Max Ta = –40 to+85°C Unit Min Max VIH 2.0 4.5 6.0 1.5 3.15 4.2 — — — — — — 1.5 3.15 4.2 — — — V VIL 2.0 4.5 6.0 — — — — — — 0.5 1.35 1.8 — — — 0.5 1.35 1.8 V VOH 2.0 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 1.9 4.4 5.9 4.18 5.68 — — — — — — — 2.0 4.5 6.0 — — 0.0 0.0 0.0 — — — — — — — — — 0.1 0.1 0.1 0.26 0.26 ±0.1 4.0 1.9 4.4 5.9 4.13 5.63 — — — — — — — — — — — — 0.1 0.1 0.1 0.33 0.33 ±1.0 40 V VOL Input current Iin Quiescent supply current ICC Rev.2.00 Mar 30, 2006 page 4 of 8 V Test Conditions Vin = VIH or VIL IOH = –20 µA Vin = VIH or VIL IOH = –4 mA IOH = –5.2 mA IOL = 20 µA IOH = 4 mA IOH = 5.2 mA µA Vin = VCC or GND µA Vin = VCC or GND, Iout = 0 µA HD74HC4543 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Symbol VCC (V) Ta = 25°C Min Typ Max Ta = –40 to +85°C Min Max Unit Test Conditions tPLH tPHL 2.0 4.5 6.0 — — — — 33 — 400 80 68 — — — 500 100 86 ns A, B, C or D to a – g tPLH tPHL 2.0 4.5 6.0 — — — — 22 — 300 60 52 — — — 380 76 66 ns Blanking to a – g tPLH tPHL 2.0 4.5 6.0 — — — — 18 — 300 60 52 — — — 380 76 66 ns Phase to a – g tPLH tPHL 2.0 4.5 6.0 — — — — 35 — 400 80 68 — — — 500 100 86 ns Latch Disable to a – g Pulse width tw tsu Hold time th 80 16 14 100 20 17 50 10 9 — — — — 5 — — 2 — — 1 — — 5 — — — — — — — — — — 75 15 13 100 20 17 125 25 21 65 13 11 — — — — — — — — — — — — 95 19 16 ns Setup time 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 — — 5 10 — 10 pF Propagation delay time Output rise/fall time tTLH tTHL Input capacitance Cin ns ns ns Test Circuit VCC VCC Output Input Pulse Generator Zout = 50 Ω Input Pulse Generator Zout = 50 Ω See Function Table A B C a D Output LD Ph g BI Note : 1. CL includes probe and jig capacitance. Rev.2.00 Mar 30, 2006 page 5 of 8 CL = 50 pF CL = 50 pF HD74HC4543 Waveforms • Waveform – 1 A to D BI*, Ph tr tf 90% 50% VCC 90% 50% 10% 10% tPLH, tPHL * tPLH, tPHL 90% VOH 90% 50% a to g 0V 50% 10% 10% VOL tTLH, tTHL tTLH, tTHL Note : 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns • Waveforn – 2 VCC A to D 0V tr VCC 90% 50% LD 10% 0V tPLH, tPHL VOH 90% a to g 50% 10% VOL tTLH, tTHL Note : 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns • Waveform – 3 tr tf 90% 50% LD 10% tsu 10% tw tsu 90% 50% 10% 90% A to D 10% tr/tf VCC 90% 50% th VCC 50% tr/tf Note : 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns Rev.2.00 Mar 30, 2006 page 6 of 8 0V 0V HD74HC4543 Package Dimensions JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B Previous Code DP-16FV MASS[Typ.] 1.05g D 9 E 16 1 8 b3 0.89 A1 A Z L Reference Symbol θ bp e e1 D E A A1 bp b3 c θ e Z L c e1 ( Ni/Pd/Au plating ) JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B *1 Previous Code FP-16DAV Dimension in Millimeters Min Nom Max 7.62 19.2 20.32 6.3 7.4 5.06 0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0° 15° 2.29 2.54 2.79 1.12 2.54 MASS[Typ.] 0.24g D F 16 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 9 c HE *2 E bp Index mark Terminal cross section ( Ni/Pd/Au plating ) 1 Z 8 e *3 bp x Reference Dimension in Millimeters Symbol M A L1 A1 θ y L Detail F Rev.2.00 Mar 30, 2006 page 7 of 8 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 7.50 7.80 8.00 1.27 0.12 0.15 0.80 0.50 0.70 0.90 1.15 HD74HC4543 JEITA Package Code P-SOP16-3.95x9.9-1.27 RENESAS Code PRSP0016DG-A *1 Previous Code FP-16DNV MASS[Typ.] 0.15g D F 16 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 9 c *2 Index mark HE E bp Terminal cross section ( Ni/Pd/Au plating ) 1 Z Reference Dimension in Millimeters Symbol 8 e *3 bp x M A L1 A1 θ L y Detail F Rev.2.00 Mar 30, 2006 page 8 of 8 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Min Nom Max 9.90 10.30 3.95 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0° 8° 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0