ALUMINUM ELECTROLYTIC CAPACITORS SA 7mmL, For General Purposes series Standard miniature series with 7mm height. SR 7mmL, High CV series Higher CV series with 7mm height. Smaller (SR series) ST High Temperature Compliant to the RoHS directive (2011/65/EU). SA Bi-polarized SP Smaller SR Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current SA series SR series – 40 to +85˚C –40 to +85˚C 6.3 to 50V 4 to 50V 0.1 to 220µF 0.1 to 470µF ± 20% at 120Hz, 20˚C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (μA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 4 0.35 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz 4 6 12 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Endurance 6.3 4 8 10 3 6 Marking 50 2 3 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 U S A 11 A2 33 3 4 0 5M 6D 7D φd Sleeve (P.E.T.) 8 9 10 11 US A 1 A 3 3 0 M DD φd Configuration P±0.5 φD+0.5MAX Capacitance tolerance (±20%) P±0.5 φD+0.5MAX 35 2 3 Type numbering system (Example : SA series : 10V 33µF) Radial Lead Type L+1MAX L+1MAX 15MIN 15MIN Capacitance tolerance (±2 Rated voltage (10V) (mm) 4MIN 4MIN φD P φd 4 5 6.3 1.5 2.0 2.5 φD 0.45 4 0.45 5 0.45 P φd 8 3.5 6.3 0.5 1.5 2.0 2.5 0.45 0.45 0.45 Rated capacitance (33 Series name (mm) Type 8 3.5 0.5 Configuration φD 4 to 8 Configuration DD Code Series 0.1 0R1 0.22 R22 0.33 R33 0.47 R47 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 4 (0G) SR 6.3 (0J) SA SR 10 (1A) SA SR Pb-free leadwire Pb-free PET sleeve 25 (1E) DD SA SR 4 to 8 35 (1V) SA SR 4×7 33 4×7 39 5×7 65 6.3 × 7 110 8×7 165 8×7 240 4×7 34 5×7 42 5×7 50 6.3 × 7 77 8×7 130 4×7 34 4×7 40 4×7 48 5×7 78 6.3 × 7 120 8×7 180 5×7 38 5×7 47 6.3 × 7 59 8×7 96 4×7 35 4×7 43 5×7 59 6.3 × 7 87 8×7 145 120 Hz 1.00 4×7 28 5×7 44 6.3 × 7 57 6.3 × 7 68 8×7 107 4×7 28 4×7 39 5×7 55 5×7 65 6.3 × 7 98 8×7 150 5×7 33 6.3 × 7 51 6.3 × 7 63 8×7 78 4×7 28 5×7 48 5×7 58 6.3 × 7 71 8×7 115 4×7 24 5×7 36 6.3 × 7 57 8×7 72 4×7 24 4×7 31 5×7 52 6.3 × 7 65 8×7 85 50 (1H) SA SR 4×7 1.0 4×7 2.3 4×7 3.5 4×7 5.0 4×7 10 4×7 19 4×7 24 5×7 29 6.3 × 7 44 8×7 65 4×7 1.0 4×7 2.3 4×7 3.5 4×7 5.0 4×7 10 4×7 19 4×7 24 4×7 28 5×7 38 6.3 × 7 58 8×7 75 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 85˚C 120Hz Frequency coefficient of rated ripple current 50 Hz 0.70 16 (1C) SA SR 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Rated voltage (1 Series na T Pb-free leadwire Pb-free PET sleeve φD V(Code) Configuratio Rated capacitance (33 μF) Dimensions Frequency Coefficient 25 2 4 After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Cap.(μF) 16 2 4 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D