ALUMINUM ELECTROLYTIC CAPACITORS CZ Chip Type, High Reliability. Low temperature ESR specification. series Chip type, high temperature range, for +125°C use. Added ESR specification after the test at -40°C. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2002/95/EC). Low ESR Long Life CZ CJ Specifications Item Performance Characteristics Category Temperature Range –40 to +125°C Rated Voltage Range 10 to 35V Rated Capacitance Range 47 to 470 µF Capacitance Tolerance ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater. Leakage Current Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 10 0.30 16 0.23 25 0.18 35 0.16 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) 10 16 25 35 Impedance ratio Z–40°C / Z+20°C ZT / Z20 (MAX.) 12 8 6 4 Resistance to soldering heat Marking Type numbering system (Example : 35V 47µF) Chip Type 1 please contact us for vibration resistance. Positive 6 7 9 10 11 12 13 14 Package code Size code A±0.2 A±0.2 Capacitance tolerance (±20%) Rated capacitance (47µF) Rated voltage (35V) Series name L±0.5 C±0.2 A±0.2 0.3 MAX. B±0.2 A±0.2 a2 220V CZ A±0.2 A±0.2 E Trade mark Series φ D±0.5 Voltage (V : 35V ) 0.5 MAX. Plastic platform 0.5MAX. C±0.2 B±0.2 φD±0.5 a2 220V CZ (φ 8 to φ10) Vibration Resistance Positive Plastic platform 0.3MAX. Series Configration Code Standard L Vibration Resistance S Negative (φ 8 to φ10) Standard L±1.0 Capacitance Lot No. 8 Type H Trade mark 5 L ± 0.3 Capacitance Voltage (V : 35V ) 4 Configuration E B±0.2 C±0.2 3 0.5MAX. Plastic platform 0.3MAX. φD±0.5 a2 47V CZ Series 2 UC Z 1 V 4 7 0 MC L 1 GS E (φ 6.3) Standard Voltage (C:35V) Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Capacitance Change Within ±10% of the initial capacitance value which is maintained at 250°C. The capacitors shall meet tan δ Less than or equal to the initial specified value the characteristic requirements listed at right when they Leakage current Less than or equal to the initial specified value are removed from the plate and restored to 20°C. Black print on the case top. Shelf Life Lot No. Capacitance Change tan δ Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours (2000 hours for L<10mm) at 125°C. Endurance Negative H Lot No. Capacitance H Aid electrode Standard φD×L (mm) Vibration Resistance (mm) 6.3 × 7.7 8 × 10 10 × 10 A 2.4 2.9 3.2 φD×L 8 × 10 10 × 10 A 2.9 3.2 B 6.6 8.3 10.3 B 8.3 10.3 C 6.6 8.3 10.3 C 8.3 10.3 E 2.2 3.1 4.5 E 3.1 4.5 L 7.7 10 10 L 10 10 H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 H Rated Voltage V Code 10 A 16 C 25 E 35 V 1.1 to 1.5 1.1 to 1.5 CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS CZ series Dimensions Cap. (µF) 47 V 10 16 25 35 Code 1A 1C 1E 1V 470 68 680 100 101 220 330 470 221 331 471 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 6.3 × 7.7 0.45 5 40 197 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 10 × 10 0.15 2 3.5 500 6.3 × 7.7 0.45 5 40 197 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 8 × 10 0.20 3 4.5 270 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 10 × 10 0.15 2 3.5 500 Case size φD × L (mm) 10 × 10 0.15 2 3.5 500 after endurance Initial Initial test 20°C -40°C 2000hours Rated -40°C ripple ESR Max. ESR (Ω) at 20°C / -40°C 100kHz, Rated ripple Current (mArms) at 125°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current 0 Frequency0/ Coefficient 50Hz 0.35 120Hz 0.50 300Hz 0.64 1kHz 0.83 10kHz or more 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100Z