ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedance series Low impedance over wide temperature range of – 55 to +105°C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Compliant to the RoHS directive (2011/65/EU). MF Low Impedance MT Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 1 to 100µF Rated Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.22 Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.20 16 0.18 25 0.14 35 0.12 Measurement frequency : 120Hz 6.3 2 4 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z– 55°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 10 2 4 16 2 3 Capacitance change tan δ Leakage current 35 2 3 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storig the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 25V 10μF) 1 φd 2 3 1 4 5 2 3 6 7 4 5 8 6 9 10 11 7 8 9 10 11 UMF 1 E 1 0 0 M DD UMF 1 E 1 0 0 M DD φ D+0.5 MAX P±0.5 φd P±0.5 Sleeve (P.E.T.) Sleeve (P.E.T.) φ D+0.5 MAX 25 2 3 (mm) 15 MIN L+1MAX 15 MIN L+1MAX φD P φd 4 MIN 4 MIN 4 5 6.3 φ D 2.0 4 5 1.5 2.5 P 1.5 2.0 0.45 0.45 0.45 φ d 0.45 0.45 (mm) 6.3 2.5 0.45 Configuration Configuration Pb-free leadwire φD Pb-free Pb-free PET sleeve leadwire φD Pb-free 4 to 6.3 DD PET sleeve 4 to 6.3 DD Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (10μF) Rated capacitance (10μF) Rated voltage (25V) Rated voltage (25V) Series name Series name Type Type Dimensions 6.3 0J V Cap.(μF) 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 Code 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 4×5 5×5 5×5 6.3 × 5 6.3 × 5 5.0 2.6 2.6 1.3 1.3 10 1A 50 80 80 115 115 5×5 5×5 6.3 × 5 2.6 2.6 1.3 16 1C 80 80 115 50 Hz 0.35 120 Hz 0.50 300 Hz 0.64 1 kHz 0.83 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 4×5 4×5 5×5 6.3 × 5 6.3 × 5 6.3 × 5 5.0 5.0 2.6 1.3 1.3 1.3 50 50 80 115 115 115 4×5 4×5 4×5 4×5 4×5 5×5 5×5 6.3 × 5 6.3 × 5 35 1V 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 Case size Impedance φD × L (mm) 50 50 50 50 50 80 80 115 115 Rated ripple Max. Impedance (Ω) at 20°C 100kHz Rated ripple current (mArms) at 105°C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 4×5 5×5 5×5 6.3 × 5 6.3 × 5 25 1E 10 kHz or more 1.00 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D