ECO-PRODUCTS Eco-Products “GeoCap” Nichicon promotes environmentally conscious practices. Nichicon offers “GeoCap”,which has completely lead free terminals and contains no polyvinyl chloride in the sleeve. Conductive Polymer Aluminum Solid Electrolytic Capacitors Type • Classification Series Surface Mount type CF, CJ, CK, CG, CS, CV, CX, CR Radial Lead type LF, LE, LG, LS, LV, LX Lead-Free Compliance Anti Polyvinyl Chloride Compliance Complied Complied Lead-Free Compliance Anti Polyvinyl Chloride Compliance Page 31 ~ 50 ~ Conductive Polymer Aluminum Solid Electrolytic Capacitors(FPCAP) Type • Classification Surface Mount type Radial Lead type Series 62 ~ PS, PA, HS, HA, SS, SA, SB, FS, FA, SL NS, R7, R5, L8, E5, S8, F8, NU, NE, S6, HT Page Complied Complied 72 ~ CAT.8100D ECO-PRODUCTS Corresponding to RoHS Directive Conductive Polymer Aluminum Solid Electrolytic Capacitors Conductive Polymer Aluminum Solid Electrolytic Capacitors(FPCAP) SMD type Lead wire terminal type SMD type Lead wire terminal type (CV, CX, CR series) (LV, LX series) (except CV, CX, CR) (except LV, LX) Corresponding to RoHS Directive Material SMD type Lead wire terminal type Complied Complied The portion of the components Plating on terminals Sn plating Ag plating Insulating Sleeves Construction of terminals Sn plating Sn plating Does not contain Does not contain Fe/Cu/Ag or Cu/Ag Fe/Cu/Sn Cu/Sn Cu/Sn or Fe/Cu/Sn Please refer to page 25 for the recommendation reflow condition(FPCAP). Correspondence to 260°c flow soldering condition Lead (Pb) Resistance to soldering heat Chromium (VI) Please refer to page 19 for the recommendation reflow condition. Correspondence to 265°c flow soldering condition Correspondence to 265°c flow soldering condition Please refer to page 19 for the recommendation reflow condition. Solderability Tensile strength No significant solderability difference between Sn-Ag-Cu and Sn-Pb solder. No significant solderability difference between Sn-Ag-Cu and Sn-Pb solder. Plating material Does not contain Does not contain Does not contain Does not contain Add "Pb free" marking on outer carton label Add "Pb free" marking on outer carton label Not Applicable Not Applicable Mercury Cadmium PBB PBDE Identification for RoHS compliance parts MSL (IPC/JEDEC J-STD-020D) Aluminum Electrolytic Capacitors SMD type Lead wire terminal type Corresponding to RoHS Directive Material Insulating Sleeves Construction of terminals Resistance to soldering heat Chromium (VI) Snap-in terminal type Screw terminal type Complied (Lug terminal type : Avallable) Complied The portion of the components Plating on terminals Lead (Pb) Complied (< or=Dia.10mm) Change plating from Sn-Pb toSn-Bi Change plating from Sn-Pb to Sn (> or=Dia.12.5mm) Change plating from Sn-Pb to Sn Al Replaced with PET No used Fe/Cu/Sn-1.5Bi (<or=Dia 10mm) Fe/Cu/Sn (>or=Dia 12.5mm) Fe/Cu/Sn Cu-Zn/Au (KG series type-III) Cu/Sn (KZ, FG, ES, DB series) Plating thickness 12 µm Plating type matte No heat treatment after plating Please refer to page 19 for the recommendation reflow condition. Al Plating thickness 10µm Plating type matte No heat treatment after plating Correspondence to 260°c flow soldering condition Solderability Tensile strength No significant solderability difference between Sn-Ag-Cu and Sn-Pb solder. Plating material Does not contain Not Applicable Available (Chromium (VI) contained in the plating of fixtures) Mercury Cadmium Does not contain PBB PBDE Identification for RoHS compliance parts MSL (IPC/JEDEC J-STD-020D) Part numbers are changed Add "Pb-free" marking on inner and outer carton label Part numbers are changed Add "Pb-free" and "PVCless" marking on inner and outer carton label. Part numbers are changed Add "RoHS" marking on outer carton label. Not Applicable CAT.8100D MSL (IPC/JEDEC J-STD-020D) Not Applicable Not Applicable ECO-PRODUCTS Part Numbering for Pb-free Aluminum Electrolytic Capacitors SMD type Lead wire terminal type Part Numbers for Pb-free SMD type capacitors represent as follows: (1) When certain part numbers are changed because of replacement with Pb-free plated terminals, their 11 digit shows the distinction. (Example) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U Z S 1 C 1 0 0 M C R 1 G B (Sn-Pb plated terminals) U ZS 1C 100 M CL 1GB type Rated Voltage Series Code Rated Capacitance Configration (Pb-free plated terminals) RoHS compliant Capacitance Tolerance TapingCode(Inclusive case diameter and packing spec) L will be put at 11 digit of numbering system Exception : 10th digit of the part number also need to be changed for the following series and case size. 8X6.2 case size of WF, UX and UR : BR to CL UE. BC series (Vibration Resistance) is only Pb-free and 11th digit the part number change to "S". CD series is only Pb-free. In case of φ12.5 or more: 11th digit the part number change to "Q". Part Numbers for Pb-free type capacitors represent as follows: (1) When certain part numbers are changed because of replacement with Pb-free plated leadwire and PVC less , sleeves the 11th digit of the part number represents the distinction. (Example) 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 U VZ 1A 331 M EH (Sn-Pb plated leadwire,PVC sleeve) U VZ 1A 331 M ED Type Rated Voltage Configration Series Code Rated Capacitance Capacitance Tolerance Exception : 10th digit of the part number also need to be changed for the following series and case size. 8X7 case size of SA, SR and SP CA to DD 8X7 case size of ST and SF CH to DD *Configuration code is subject to change by series of case diameter. Screw terminal type (Example) (Example) (Sn-Pb plated terminals, PVC sleeve and bottom plate) (Pb-free plated terminals, 1 2 3 4 5 6 7 8 9 10 11 12 PETsleeve and no L GU 2D 681 M EL A bottom plate) Rated Voltage Case dia. code Type 2 3 4 5 6 7 8 9 10 11 12 L GU 2D 681 M HL A Series Code Rated Capacitance Configration Capacitance Tolerance RoHS compliant E will be put at 10 digit of numbering system RoHS compliant D will be put at 11 digit of numbering system Snap-in terminal type 1 (Pb-free plated leadwire, PET sleeve) 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 L NX 2W 221 M SM G L NX 2W 221 M S E G Type Rated Voltage Case dia. code Series Code Rated Capacitance Configration Capacitance Tolerance Bracket, Screwbolt, Lock washer (Cr (VI) plating) Cr (III) plating RoHS compliant E will be put at 11 digit of numbering system CAT.8100D