R74 Miniature Series Single Metallized Polypropylene Film

Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film,
Radial, AC Applications (Automotive Grade)
Overview
Applications
The R74 Miniature Series is constructed of metallized
polypropylene film with radial leads of tinned wire. The radial
leads are electrically welded to the metal layer on the ends of
the capacitor winding. The capacitor is encapsulated in a selfextinguishing solvent resistant plastic case with thermosetting
resin material meeting the UL 94V–0 requirements.
Typical applications include electronic lighting such as
automotive headlamps and ballasts, as well as pulse applications
with high AC voltage and high current. Not suitable for acrossthe-line application (see Suppressor Capacitors).
Automotive grade devices are available and meet the demanding
Automotive Electronics Council's AEC–Q200 qualification
requirement.
Benefits
• Voltage range: 600 VAC
• Capacitance range: 470 pF – 0.018 µF
• Lead Spacing: 10 – 15.0 mm
• Capacitance tolerance: ±5%, ±10%
• Climatic category: 55/105/56 IEC 60068-1
• Operating temperature range of -55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–2
•Self-healing
• Automotive (AEC–Q200) grades available
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
R74
6
F
0470
Series
Rated Voltage (VAC)
Lead Spacing (mm)
Capacitance Code (pF)
Metallized
Polypropylene
6 = 600
F = 10
I = 15
Digits 2 – 4 indicate the
first three digits of the
capacitance value.
First digit indicates the
number of zeros to be
added.
AA
Lead and
Packaging Code
See Ordering
Options Table
00
J
Internal Use
00
Capacitance
Tolerance
J = ±5%
K = ±10%
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
1
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Ordering Options Table
Lead Spacing
Nominal (mm)
Type of Leads and Packaging
Lead Length
(mm)
Lead and
Packaging
Code
4 +2/-0
H0= 18.5 +/-0.5
AA
DQ
H0=18.5 +/- 0.5
H0=18.5 +/- 0.5
3.5 +0.5/-0
4.0 +0.5/-0
3.2 +0.3/-0.2
GY
CK
JB
JE
JH
18 +1/-1
30 +5/-0
25 +2/-1
JM
40
50
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
Other Lead and Packaging Options
10
Tape & Reel (Standard Reel)
Tape & Reel (Large Reel)
Bulk (Bag)–Short Leads
Bulk (Bag)–Short Leads
Bulk (Bag)–Short Leads
15
22.5
Bulk (Bag)–Long Leads
Bulk (Bag)–Long Leads
Bulk (Bag)–Long Leads
Dimensions – Millimeters
FRONT VIEW
SIDE VIEW
L
B
H
d
LL
p
p
B
H
L
d
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
10.0
10.0
10.0
15.0
15.0
15.0
+/- 0.4
+/- 0.4
+/-0.4
+/- 0.4
+/- 0.4
+/- 0.4
4.0
5.0
6.0
4.0
5.0
6.0
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
9.0
11.0
12.0
10.0
11.0
12.0
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
13.0
13.0
13.0
18.0
18.0
18.0
+0.2
+0.2
+0.2
+0.3
+0.3
+0.3
0.6
0.6
0.6
0.8
0.8
0.8
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
+/- 0.05
15.0
15.0
15.0
+/- 0.4
+/- 0.4
+/- 0.4
8.5
9.0
10.0
+0.2
+0.2
+0.2
14.5
12.5
16.0
+0.1
+0.1
+0.1
18.0
18.0
18.0
+0.5
+0.5
+0.5
0.8
0.8
0.8
+/- 0.05
+/- 0.05
+/- 0.05
Note: See Ordering Options Table for lead length (LL/Ho) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
2
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Related Documents
Sections
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
IEC 60384-16, IEC 60384-17
3
Rated Voltage VR (VAC)
600
Rated Voltage VR (VDC)
2000
Capacitance Range (µF)
0.00047 – 0.018
Capacitance Values
Capacitance Tolerance
Operating Temperature Range
Rated Temperature TR
Voltage Derating
E12 series (IEC 60063) measured @ 1kHz and +20 ±1°C
±5%, ±10%
-55°C to +105°C
+85°C
Above +85°C DC and AC voltage derating is 1.25%/°C
55/105/56 IEC 60068-1
Climatic Category
Average relative humidity ≤ 75%
RH = 95% for 30 days per year
RH = 85% for further days limited by average value per year
Test Voltage
Capacitance Drift
Maximum Pulse Steepness
Temperature Coefficient
Self Inductance
(Lead Length ~ 2 mm)
1.6 x VR VDC for 2 seconds (between terminations) @ +25°C ±5°C
Maximum 1% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60%
dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <VR), the specified dv/dt
can be multiplied by the factor VR /Vpp
-(200 ±100) ppm/°C at 1 kHz
Lead Spacing (mm)
10
15
L (nH) ≈
9
10
Maximum 1 nH per 1 mm lead and capacitor length.
Dissipation Factor tanδ
≤ 0.15% @ 1 kHz, ≤ 0.15% @ 100 kHz @ 25°C ±5°C
Measured @ +25°C ±5°C, 100 VDC 60 seconds
Insulation Resistance
Minimum Values Between Terminals
All Capacitance Values
≥ 100,000 MΩ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
3
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85ºC)
600 Vac
Vrms [V]
1000
100
1000 pF
2200 pF
3300 pF
4700 pF
10
p=10.0
p=10.0
p=10.0
p=15.0
0.1
1
f [kHz]
10
100
1000
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85ºC)
600 Vac
Irms [A]
10
1000 pF
2200 pF
3300 pF
4700 pF
p=10.0
p=10.0
p=10.0
p=15.0
1
0.1
0.01
0.1
1
f [kHz]
10
100
1000
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
4
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Environmental Test Data
Damp Heat, Steady
State Test
Test Conditions:
Temperature:
Relative humidity (RH):
Test duration:
Endurance Test
+40°C ± 2°C
93% ± 2%
56 days
Performances
│Δ C/C│ ≤ 2%,
Δ tanδ ≤ 0.001 @ 1 kHz
IR after test ≥ 50% of initial limit
Test Conditions
Temperature:
Voltage applied:
Test duration:
Resistance to Soldering
Heat Test
+85°C ±2°C
1.25 x VR (AC) @ 50 Hz
2,000 hours
Performances
│Δ C/C│ ≤ 10%,
Δ tanδ ≤ 0.0015 @ 1 kHz
IR after test ≥ 50% of initial limit
Test Conditions
Solder bath temperature:
Dipping time (with heat
screen):
260°C ±5°C
10 seconds ±1 second
Performances
│Δ C/C│ ≤ 1%,
Δ tanδ ≤ 0.001 @ 1 kHz
IR after test ≥ initial limit
Environmental Compliance
All KEMET pulse capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
5
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Dimensions in mm
B
H
L
VAC
VDC
Capacitance
Value (µF)
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
0.00047
0.00068
0.00082
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.0023
0.0027
0.0039
0.0047
0.0068
0.012
0.015
0.018
4.0
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
4.0
4.0
5.0
5.0
6.0
8.5
8.5
10.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
11.0
11.0
12.0
12.0
12.0
12.0
12.0
12.0
10.0
10.0
11.0
11.0
12.0
14.5
14.5
16.0
VAC
VDC
Capacitance Value
(µF)
B (mm)
H (mm)
Lead
Spacing (p)
dV/dt
(V/µs)
Max K0
(V2/µs)
New KEMET
Part Number
Legacy Part
Number
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
9,500
9,500
9,500
9,500
9,500
9,500
9,500
9,500
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
40,000,000
38,000,000
38,000,000
38,000,000
38,000,000
38,000,000
38,000,000
38,000,000
38,000,000
746F0470(1)00(2)
746F0680(1)00(2)
746F0820(1)00(2)
746F1100(1)00(2)
746F1120(1)00(2)
746F1150(1)00(2)
746F1180(1)00(2)
746F1220(1)00(2)
746F1270(1)00(2)
746F1330(1)00(2)
746F1390(1)00(2)
746F1470(1)00(2)
746F1560(1)00(2)
746F1680(1)00(2)
746F1820(1)00(2)
746I1230(1)00(2)
746I1270(1)00(2)
746I1390(1)00(2)
746I1470(1)00(2)
746I1680(1)00(2)
746I2120(1)00(2)
746I2150(1)00(2)
746I2180(1)00(2)
R746F0470(1)00(2)
R746F0680(1)00(2)
R746F0820(1)00(2)
R746F1100(1)00(2)
R746F1120(1)00(2)
R746F1150(1)00(2)
R746F1180(1)00(2)
R746F1220(1)00(2)
R746F1270(1)00(2)
R746F1330(1)00(2)
R746F1390(1)00(2)
R746F1470(1)00(2)
R746F1560(1)00(2)
R746F1680(1)00(2)
R746F1820(1)00(2)
R746I1230(1)00(2)
R746I1270(1)00(2)
R746I1390(1)00(2)
R746I1470(1)00(2)
R746I1680(1)00(2)
R746I2120(1)00(2)
R746I2150(1)00(2)
R746I2180(1)00(2)
L (mm)
Lead
Spacing (p)
dV/dt
(V/µs)
Max K0
(V2 /µs)
New KEMET
Part Number
Legacy Part
Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = ±10%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
6
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Soldering Process
Wave Soldering Recommendations
The implementation of the RoHS directive has resulted in the
selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
300
This has increased the liquidus temperature from that of 183ºC
for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a
250
First wave
Second wave
result, the heat stress to the components, even in wave soldering,
200
has increased considerably due to higher pre-heat and wave
Cooling
temperatures. Polypropylene capacitors are especially sensitive
Preheating
150
to heat (the melting point of polypropylene is 160 – 170ºC). Wave
soldering can be destructive, especially for mechanically small
T
100
polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
and great care has to be taken during soldering. The recommended
50
solder profiles from KEMET should be used. Please consult
0
KEMET with any questions. In general, the wave soldering curve
0
40
80
120
160
200
from IEC Publication 61760-1 Edition 2 serves as a solid guideline
Time (s)
for successful soldering. Please see Figure 1.
Manual Soldering Recommendations
Reflow soldering is not recommended for through-hole film
capacitors. Exposing capacitors to a soldering profile in excess of
Following is the recommendation for manual soldering with a
the above the recommended limits may result to degradation or
soldering iron.
permanent damage to the capacitors.
Recommended Soldering Temperature
2+3s max
Temperature (°C)
260°C
ΔT <150°C
ca 2°C/s
ca 3.5°C/s typical
ca 5°C/s
115°C max
preheat
100°C
Figure 1
240
400
Soldering iron bit temperature (deg C)
Do not place the polypropylene capacitor through an adhesive
curing oven to cure resin for surface mount components. Insert
through- hole parts after the curing of surface mount parts. Consult
KEMET to discuss the actual temperature profile in the oven, if
through-hole components must pass through the adhesive curing
process. A maximum two soldering cycles is recommended. Please
allow time for the capacitor surface temperature to return to a
normal temperature before the second soldering cycle.
Typical
350
300
250
200
150
100
50
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Dielectric
Film Material Capacitor Capacitor Capacitor Capacitor Capacitor
Lead
Spacing
<10 mm
Lead
Spacing =
15 mm
Lead
Spacing
>15 mm
Lead
Spacing
<15 mm
Lead
Spacing
>15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene
100°C
110°C
130°C
260°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
The soldering iron tip temperature should be set at 350°C
(+10°C maximum) with the soldering duration not to exceed more
than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
7
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Soldering Process cont'd
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be
soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
in double wave flow soldering, and great care must be taken so that the parts are not overheated.
Construction
3 Sections
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Detailed Cross Section
Molded Plastic
Case
Self-Extinguishing
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
FILM WINDING SCHEME OPTIONS
Single-sided Metallized Polypropylene Film
Double-sid
Margin
Metal Contact
Layer
Metal Contact
Single-sided
Metallized
Layer
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Double-sided
Metallized
Polyester Carrier
Film
Polypr
Film D
Margin
1 Section
2 Sections
Leads
1 Section
Winding Schemes
Single-sided
Metallized
Polypropylene
Film
3 Sections
Single-sided
Metallized
Polypropylene
Film
4 Sections
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Double-sided
Metallized
Polyester Carrier
Film
Polypr
Film D
3 Sections
F3105_R74_MINI • 11/20/2014
8
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Marking
FRONT
TOP
Manufacturer’s
Logo
Series,
Dielectric
Code
Capacitance
Rated Voltage
Manufacturing
Date Code
QA Number
Capacitance
Tolerance
Packaging Quantities
Lead
Spacing
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk Short
Leads
Bulk Long
Leads
Standard Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
10
4.0
5.0
6.0
9.0
11.0
12.0
13.0
13.0
13.0
2,000
1,300
1,000
1,800
1,500
1,200
750
600
500
1,500
1,250
1,000
1,000
800
680
15
4.0
5.0
6.0
8.5
10.0
10.0
11.0
12.0
14.5
16.0
18.0
18.0
18.0
18.0
18.0
2,500
2,000
1,750
1,000
750
1,500
1,000
900
500
500
600
500
300
300
1,500
1,250
1,000
700
600
1,000
800
680
440
380
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014
9
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 7.5 mm
Lead Spacing 10 & 15 mm
Lead Spacing 22.5 & 27.5
Taping Specification
Description
Dimensions (mm)
Symbol
Lead Spacing
10.0
15.0
Tolerance
Lead wire diameter
d
0.6
0.6 - 0.8
±0.05
Taping lead space
P
25.4
25.4
±1
Feed hole lead space *
P0
12.7
12.7
±0.2 **
Centering of the lead wire
P1
7.7
5.2
±0.7
Centering of the body
P2
12.7
12.7
±1.3
Lead spacing ***
F
10.0
15.0
+0.6/-0.1
Component alignment
∆h
0
0
±2
Component deviation
∆p
0
0
±1
Height of component
from tape center
H0****
18.5
18.5
±0.5
Carrier tape width
W
18
18
+1/-0.5
Hold down tape width
W0
9
10
Minimum
Hole position
W1
9
9
±0.5
Hold down tape position
W2
3
3
Maximum
Feed hole diameter
D0
4
4
±0.2
t
0.7
0.7
±0.2
Tape thickness
* Available also 15 mm.
** Maximum 1 mm on 20 lead spacing.
*** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.
**** H0 = 16.5 mm is available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014 10
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
H
W
T
360
340
59
H
T
Reel Specifications
W
Dimensions (mm)
D
H
W
355
500
30
25
55 Maximum
D
H
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
Code
M
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
H
J
K
L
M
Month
January
February
March
April
May
June
July
August
September
October
November
December
Code
1
2
3
4
5
6
7
8
9
O
N
D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
W
F3105_R74_MINI • 11/20/2014 11
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Northeast
Wilmington, MA
Tel: 978-658-1663
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014 12
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R74 Miniature Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3105_R74_MINI • 11/20/2014 13