A70 Series Single Metallized Polypropylene Film, Axial

Polypropylene Pulse/High Frequency Capacitors
A70 Series Single Metallized Polypropylene Film, Axial
Overview
Applications
The A70 Series is constructed of metallized polypropylene film
with axial leads of tinned wire. The axial leads are electrically
welded to the metal layer on the ends of the capacitor winding.
The capacitor is encapsulated in a polyester tape wrapping case
with thermosetting resin material.
Typical applications include temperature compensation circuits,
timing, oscillator circuits, power factor correction and coupling
capacitors in switched mode power supply (SMPS) applications.
Not suitable for across-the-line application (see Suppressor
Capacitors).
Benefits
• Voltage range: 160 – 630 VDC
• Capacitance range: 0.001 µF – 4.7 µF
• Diameter: 5 – 21.5 mm
• Length: 11 – 33 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56 IEC 60068-1
• Operating temperature range of -55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–1
•Self-healing
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
A70
G
F
Series
Rated Voltage (VDC)
Length (mm)
Metallized
Polypropylene
G = 160
I = 250
M = 400
P = 630
F = 11
H= 14
K = 20.5
Q = 28
T = 33
2220
Capacitance Code
(pF)
The last three digits
represent significant
figures. The first digit
specifies the total
number of zeros to be
added.
AA
Lead and
Packaging Code
See Ordering
Options Table
00
J
Internal Use
00 (Standard)
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
1
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Ordering Options Table
Type of Leads and Packaging
Lead Length
(mm)
Bulk (Bag) – Straight Leads
Tape & Reel (Standard Reel)
Lead and
Packaging
Code
40 +/-5
AA
26
Dimensions – Millimeters
SIDE VIEW
FRONT VIEW
LL
L
LL
D
d
D
L
d
D
L
d
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
5.0
5.5
6.0
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
11.0
14.0
14.0
14.0
14.0
20.5
14.0
20.5
20.5
28.0
14.0
20.5
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.5
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
8.5
9.0
9.5
10.0
Maximum
Maximum
Maximum
Maximum
28.0
20.5
28.0
28.0
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
±0.05
±0.05
±0.05
±0.05
11.0
11.5
12.0
12.5
13.0
13.5
14.5
15.0
16.5
17.0
17.5
18.0
20.0
21.0
21.5
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
28.0
28.0
33.0
33.0
28.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
Note: See Ordering Options Table for lead length (LL / I) options.
Note: See Ordering Options Table for lead length (LL / I) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
2
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Performance Characteristics
Dielectric
Plates
Winding
Leads
Protection
Related Documents
Polypropylene film
Metal layer deposited by evaporation under vacuum
Non-inductive type
Tinned wire
Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94.
IEC 60384-16
Rated Voltage VR (VDC)
160
250
400
630
Rated Voltage VR (VAC)
90
200
220
250
Capacitance Range (µF)
0.022 – 4.7
0.01 – 3.3
0.0068 – 1.5
0.001 – 0.68
Capacitance Values
Capacitance Tolerance
Operating Temperature Range
Rated Temperature TR
Voltage Derating
E6 series (IEC 60063) measured @ 1 kHz and +20 ±1°C
±5%, ±10%, ±20%
-55°C to +105°C
+85°C
Above +85°C DC and AC voltage derating is 1.25%/°C
55/105/56 IEC 60068-1
Climatic Category
Average relative humidity ≤75%
RH = 95% for 30 days per year
RH = 85% for further days limited by average value per year
Test Voltage
Capacitance Drift
Maximum Pulse Steepness
Temperature Coefficient
Self Inductance
(Lead Length ~ 2 mm)
1.6 x VR VDC for 2 seconds (between terminations) @ +25°C ±5°C
Maximum 0.5% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60%
dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp <VR), the specified dv/dt
can be multiplied by the factor VR /Vpp
-(200 ±100) ppm/°C at 1 kHz
Maximum 1 nH per 1 mm lead and capacitor length
Maximum Values @ 25°C ±5°C
Dissipation Factor tanδ
Frequency
C ≤ 0.1 μF
0.1 µF < C ≤ 1 µF
C > 1 µF
1 kHz
0.06%
0.06%
0.06%
10 kHz
0.10%
0.20%
–
100 kHz
0.30%
–
–
Measured @ +25°C ±5°C, 100 VDC 60 seconds
Insulation Resistance
Minimum Values Between Terminals
C ≤ 0.33 μF
C > 0.33 μF
≥ 100,000 MΩ
( ≥ 500,000 MΩ ) *
≥ 30,000 MΩ • µF
( ≥ 150,000 MΩ • µF ) *
* typical value
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
3
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40ºC)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
4
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40ºC)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
5
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Environmental Test Data
Damp Heat, Steady
State Test
Test Conditions:
Temperature:
Relative humidity (RH):
Test duration:
Endurance Test
Performances
+40°C ±2°C
93% ±2%
56 days
|Δ C/C| ≤ 2%,
Δ tanδ ≤ 0.001 @ 1 kHz
IR after test ≥ 50% of initial limit
Test Conditions
Temperature:
Voltage applied:
Test duration:
Resistance to Soldering
Heat Test
Performances
|Δ C/C| ≤ 3%,
Δ tanδ ≤ 0.001 @10 kHz for C ≤ 1µF
Δ tanδ ≤ 0.001 @ 1 kHz for C > 1µF
IR after test ≥ 50% of initial limit
+85°C ±2°C
1.25 x VR (DC)
2,000 hours
Test Conditions
Solder bath temperature:
Dipping time (with heat
screen):
Performances
|Δ C/C| ≤ 1%,
Δ tanδ ≤ 0.001 @10 kHz for C ≤ 1µF
Δ tanδ ≤ 0.001 @ 1 kHz for C > 1µF
IR after test ≥ initial limit
260°C ±5°C
10 seconds ±1 second
Environmental Compliance
All KEMET pulse capacitors are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Capacitance Dimensions in mm
Value (µF)
D
L
VDC
VAC
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
250
250
250
250
250
250
250
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
200
200
200
200
200
200
200
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
0.010
0.015
0.022
0.033
0.047
0.068
0.10
5.0
5.0
5.0
5.5
5.5
6.5
7.5
7.0
8.0
8.0
9.5
11.0
12.0
14.5
17.0
5.0
5.0
5.5
5.5
6.0
7.0
8.5
VDC
VAC
Capacitance
Value (µF)
B (mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
New KEMET
Part Number
Legacy Part Number
11.0
11.0
11.0
14.0
14.0
14.0
14.0
20.5
20.5
28.0
28.0
28.0
33.0
33.0
33.0
11.0
11.0
14.0
14.0
14.0
14.0
14.0
5
5
5
5
5
5
5
3
3
2
2
2
1
1
1
11
11
10
10
10
10
10
1,600
1,600
1,600
1,600
1,600
1,600
1,600
960
960
640
640
640
320
320
320
5,500
5,500
5,000
5,000
5,000
5,000
5,000
70GF2220(1)00(2)
70GF2330(1)00(2)
70GF2470(1)00(2)
70GH2680(1)00(2)
70GH3100(1)00(2)
70GH3150(1)00(2)
70GH3220(1)00(2)
70GK3330(1)00(2)
70GK3470(1)00(2)
70GQ3680(1)00(2)
70GQ4100(1)00(2)
70GQ4150(1)00(2)
70GT4220(1)00(2)
70GT4330(1)00(2)
70GT4470(1)00(2)
70IF2100(1)00(2)
70IF2150(1)00(2)
70IH2220(1)00(2)
70IH2330(1)00(2)
70IH2470(1)00(2)
70IH2680(1)00(2)
70IH3100(1)00(2)
A70GF2220(1)00(2)
A70GF2330(1)00(2)
A70GF2470(1)00(2)
A70GH2680(1)00(2)
A70GH3100(1)00(2)
A70GH3150(1)00(2)
A70GH3220(1)00(2)
A70GK3330(1)00(2)
A70GK3470(1)00(2)
A70GQ3680(1)00(2)
A70GQ4100(1)00(2)
A70GQ4150(1)00(2)
A70GT4220(1)00(2)
A70GT4330(1)00(2)
A70GT4470(1)00(2)
A70IF2100(1)00(2)
A70IF2150(1)00(2)
A70IH2220(1)00(2)
A70IH2330(1)00(2)
A70IH2470(1)00(2)
A70IH2680(1)00(2)
A70IH3100(1)00(2)
H (mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
New KEMET Part Number
Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
6
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Table 1 – Ratings & Part Number Reference cont'd
Capacitance Dimensions in mm
Value (µF)
D
L
VDC
VAC
250
250
250
250
250
250
250
250
250
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
630
630
630
630
630
630
630
630
630
630
630
630
630
630
200
200
200
200
200
200
200
200
200
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
250
250
250
250
250
250
250
250
250
250
250
250
250
250
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
7.5
9.0
8.5
10.0
11.5
12.5
15.0
18.0
21.5
5.0
5.5
6.0
6.0
6.5
8.0
7.0
8.0
8.0
9.5
11.0
13.0
13.5
16.5
20.0
5.0
5.0
5.0
5.0
5.0
5.5
6.0
7.0
8.5
7.5
8.5
8.5
10.0
11.5
VDC
VAC
Capacitance
Value (µF)
B (mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
New KEMET
Part Number
Legacy Part Number
20.5
20.5
28.0
28.0
28.0
33.0
33.0
33.0
33.0
11.0
14.0
14.0
14.0
14.0
14.0
20.5
20.5
28.0
28.0
28.0
28.0
33.0
33.0
33.0
11.0
11.0
11.0
11.0
11.0
14.0
14.0
14.0
14.0
20.5
20.5
28.0
28.0
28.0
7
7
4
4
4
2.5
2.5
2.5
2.5
25
13.5
13.5
13.5
13.5
13.5
10
10
6.5
6.5
6.5
6.5
4
4
4
30
30
30
30
30
20
20
20
20
15
15
10
10
10
3,500
3,500
2,000
2,000
2,000
1,250
1,250
1,250
1,250
20,000
10,800
10,800
10,800
10,800
10,800
8,000
8,000
5,200
5,200
5,200
5,200
3,200
3,200
3,200
37,800
37,800
37,800
37,800
37,800
25,200
25,200
25,200
25,200
18,900
18,900
12,600
12,600
12,600
70IK3150(1)00(2)
70IK3220(1)00(2)
70IQ3330(1)00(2)
70IQ3470(1)00(2)
70IQ3680(1)00(2)
70IT4100(1)00(2)
70IT4150(1)00(2)
70IT4220(1)00(2)
70IT4330(1)00(2)
70ΜF1680(1)00(2)
70MH2100(1)00(2)
70MH2150(1)00(2)
70MH2220(1)00(2)
70MH2330(1)00(2)
70MH2470(1)00(2)
70MK2680(1)00(2)
70MK3100(1)00(2)
70MQ3150(1)00(2)
70MQ3220(1)00(2)
70MQ3330(1)00(2)
70MQ3470(1)00(2)
70MT3680(1)00(2)
70MT4100(1)00(2)
70MT4150(1)00(2)
70PF1100(1)00(2)
70PF1150(1)00(2)
70PF1220(1)00(2)
70PF1330(1)00(2)
70PF1470(1)00(2)
70PH1680(1)00(2)
70PH2100(1)00(2)
70PH2150(1)00(2)
70PH2220(1)00(2)
70PK2330(1)00(2)
70PK2470(1)00(2)
70PQ2680(1)00(2)
70PQ3100(1)00(2)
70PQ3150(1)00(2)
A70IK3150(1)00(2)
A70IK3220(1)00(2)
A70IQ3330(1)00(2)
A70IQ3470(1)00(2)
A70IQ3680(1)00(2)
A70IT4100(1)00(2)
A70IT4150(1)00(2)
A70IT4220(1)00(2)
A70IT4330(1)00(2)
A70ΜF1680(1)00(2)
A70MH2100(1)00(2)
A70MH2150(1)00(2)
A70MH2220(1)00(2)
A70MH2330(1)00(2)
A70MH2470(1)00(2)
A70MK2680(1)00(2)
A70MK3100(1)00(2)
A70MQ3150(1)00(2)
A70MQ3220(1)00(2)
A70MQ3330(1)00(2)
A70MQ3470(1)00(2)
A70MT3680(1)00(2)
A70MT4100(1)00(2)
A70MT4150(1)00(2)
A70PF1100(1)00(2)
A70PF1150(1)00(2)
A70PF1220(1)00(2)
A70PF1330(1)00(2)
A70PF1470(1)00(2)
A70PH1680(1)00(2)
A70PH2100(1)00(2)
A70PH2150(1)00(2)
A70PH2220(1)00(2)
A70PK2330(1)00(2)
A70PK2470(1)00(2)
A70PQ2680(1)00(2)
A70PQ3100(1)00(2)
A70PQ3150(1)00(2)
H (mm)
dV/dt
(V/µs)
Max K0
(V2/µs)
New KEMET Part Number
Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
7
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert throughhole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
First wave
Temperature (°C)
Recommended Soldering Temperature
Soldering iron bit temperature (deg C)
400
350
300
250
Second wave
200
Cooling
ΔT <150°C
Preheating
150
ca 2°C/s
ca 3.5°C/s typical
Tpreheat
100
ca 5°C/s
115°C max
100°C
Typical
200
50
150
100
0
0
50
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
The soldering iron tip temperature should be set
at 350°C (+10°C maximum) with the soldering
duration not to exceed more than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
8
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm
Polyester
130°C
130°C
130°C
270°C
270°C
Polypropylene
100°C
110°C
130°C
260°C
270°C
Paper
130°C
130°C
140°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material
Maximum temperature
measured inside the element
Polyester
160°C
Polypropylene
110°C
Paper
160°C
Polyphenylene
sulphide
160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be
soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
in double wave flow soldering, and great care must be taken so that the parts are not overheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015
9
Metallized
Impregnated
Paper
Polypropylene
Film Dielectric
Metallized Polyphenylene
Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
1 Section
1 Section
1 Section
Construction
Metallized Polyester Film
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided
Metallized
Polyester
Film
AXIAL - Polypropylene Film/Foil
Metal Contact
Layer
Lead
Polypropylene
Film Dielectric
Polyester Tape
Wrapping
Lead
1 Section
Detailed Cross Section
Margin
Single-sided Metallized
Metal Foil
Polypropylene
Film
(First Layer) 1 Section
Metal Contact
Thermosetting
Layer
Resin End-Fill
AXIAL - Single-sided Metallized
Polypropylene Film
Winding Scheme
Margin
Metal Foil
Polyester Tape
Wrapping
Thermosetting
Resin End-Fill
AXIAL - Single-sided Metallized
Polyester Film
Single-sided
Metallized
Polypropylene
Film
1 Section
2
Margin
AXIAL
Metallize
Single-sided
Metallized
Polyester
Film
Double-sided
Metallized
Polyester Carrier
Film
2
1 Section
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015 10
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Marking
Capacitance
Capacitance
Tolerance
Series
Dielectric
Code
Voltage
(VDC)
Packaging Quantities
Diameter
Length
Bulk
Long Leads
5.0
5.5
6.0
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
8.5
9.0
9.5
10.0
11.0
14.0
14.0
14.0
14.0
20.5
14.0
20.5
20.5
28.0
14.0
20.5
28.0
20.5
28.0
28.0
1,500
2,000
2,000
2,000
1,750
1,250
1,500
1,000
1,000
500
1,000
750
500
750
500
500
Standard
Reel
ø 355 mm
3,000
1,300
1,300
1,200
1,100
1,100
1,000
1,000
900
900
800
800
800
800
600
600
Diameter
Length
Bulk
Long Leads
11.0
11.5
12.0
12.5
13.0
13.5
14.5
15.0
16.5
17.0
17.5
18.0
20.0
21.0
21.5
28.0
28.0
33.0
33.0
28.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
500
300
300
300
300
300
300
300
200
200
200
200
150
100
100
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Standard
Reel
ø 355 mm
400
400
400
400
400
300
300
300
250
200
200
200
150
–
–
F3032_A70_AXIAL • 5/15/2015 11
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Lead Taping & Packaging (IEC 60286–1)
Table 1
Taping Specification
Description
Symbol
Dimensions (mm)
Component diameter
Body length
Component lead spacing
Reel core diameter
Arbor hole diameter
Reel diameter
Tape width
Body location (lateral deviation)
Body location (longitudinal
deviation)
Tape spacing
Lead length from the component
body to the adhesive tape
Distance between reel flanges
D
L
A(1)
E
M
ø
H
G
4.5 – 19.5
11 – 33
See Table 1
85
30
355 maximum
6 ± 0.5/9 ± 1(2)
≤ 0.7
N
≤ 1.2
B
See Table 2
I
≥ 20
C
See Table 2
(1) Maximum cumulative feed hole error 1.5 mm per 6 parts.
(2) 9 ±1 for capacitor with L ≥ 31.5.
Dimensions in mm
Diameter
A
≤5
5.1 – 9.5
9.6 – 14.7
14.8 – 19.5
5 ±0.5
10 ±0.5
15 ±0.5
20 ±1.0
Table 2
Dimensions in mm
Length
Class
B±1.5
C
≤ 11
14 – 20.5
≥ 26
I
II
III
52.4
63.6
73
75
86
98
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015 12
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015 13
Film Capacitors
Polypropylene Pulse/High Frequency Capacitors – A70 Series Single Metallized Polypropylene Film, Axial
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3032_A70_AXIAL • 5/15/2015 14