Constant current LED Drivers For outdoor use LEU-60C Series, 60Watt FEATURES: Constant current output Universal AC input/ Full range Withstand inrush voltage 300Vac within 5 seconds Short circuit, and over voltage protections IP67 rated Class , no FG Pass LPS (Limited Power Source) Test Application for LED lighting and electronic screen 100% burn-in test High reliability 2 year warranty Cooling by free air convection Ⅱ Model Input voltage (Vac) LEU60-C1050 LEU60-C1400 90-264 LEU60-C1750 Output current (mA) Output voltage (Vdc) Output power (W) Min. Max. 1050 9 48 50.4 1400 9 42 58.8 1750 9 34 59.5 ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin --- 90 -- 264 Vac Input frequency Fline --- 47 -- 63 Hz Full load, Vin =115Vac -- 1.2 -- A Full load, Vin =230Vac -- 0.7 -- A Iinrush Cold start, Vin =230Vac -- 60 -- A η Full voltage, full load -- 85 -- % Ileakage Vin =230Vac -- 0.25 -- mA Input current Inrush current Efficiency Leakage current www.pairuigroup.com Iin Page: 1 / 4 Date: 07/18/2015 Constant current LED Drivers For outdoor use LEU-60C Series, 60Watt ELECTRICAL Output Parameters Output current Output voltage Symbols Iout Vout Test Conditions / Comment Min. Typ. Max. Units LEU60-C1050 -- 1050 -- mA LEU60-C1400 -- 1400 -- mA LEU60-C1750 -- 1750 -- mA LEU60-C1050 9 -- 48 V LEU60-C1400 9 -- 42 V LEU60-C1750 9 -- 34 V Output voltage accuracy -- --- -- ±5 -- % Output current accuracy -- --- -- ±5 -- % Line regulation Iout-line --- -- ±1.0 -- % Load regulation Iout-load --- -- ±2.0 -- % Turn-on delay time Ton_delay Full voltage, full load -- 500 -- ms Ton_rise Full voltage, full load -- 120 -- ms Vin =115Vac, full load -- 16 -- ms Vin =230Vac, full load -- 50 -- ms Iripple --- -- 5%Io -- mAp-p -- Vin =115Vac, output load≥50% -- -- 20 % Rise time Hold-on time Ripple THD -- Protection Over voltage Typical:110-150%; Protection: turn off output voltage, Diode clamp type Environment Storage Ambient operating temperature Temperature coefficient Operating relative humidity www.pairuigroup.com Tstorage Ta Humidity: 5% RH to 95% RH Startup at rated voltage (Please refer to derating curve) -40 -- +80 ℃ -30 -- +70 ℃ -- --- -- 300 -- ppm Ha Non condensing 10 -- 95 % Page: 2 / 4 Date: 07/18/2015 Constant current LED Drivers For outdoor use LEU-60C Series, 60Watt ELECTRICAL Environment Parameters MTBF Symbols TMTBF Test Conditions / Comment Full load, 220Vac input, ℃ 25 ambient temperature Dimension(LxWxH) Min. Typ. Max. Units -- 743 -- kHrs 162.5 x 42.5 x 32.0mm Weight 400g Safety / EMC Safety standards UL1310, TUV EN60950-1, IP67 Withstand voltage I/P-O/P:3KVAC Insulation Resistance I/P-O/P:>100M Ohms/500VDC/25 /70%RH EMC emission Design to EN55022(CISPR22)Class B, EN61000-3-2 Class A, EN61000-3-3 EMC immunity Design to EN61000-4-2,3,4,5,6,8,11, EN55024 ℃ ℃ Notes: 1. Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 and Vin = 230Vac, rated load; 2. Ripple & Noise are measured at 20MHZ of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor; 3. Suitable for indoor or outdoor which away from direct sunlight conditions, avoid soaking in water for more than 30 minutes. MECHANICAL Unit: mm www.pairuigroup.com Page: 3 / 4 Date: 07/18/2015 Constant current LED Drivers For outdoor use LEU-60C Series, 60Watt MECHANICAL RECOMMEND INSTALLATION BLOCK DIAGRAM ELECTRICAL CURVE DERATING CURVE www.pairuigroup.com STATIC CHARACTERISTIC CURVE Page: 4 / 4 Date: 07/18/2015