Pletronics, Inc. Designed and manufactured by: AXTAL GmbH & Co. KG 19013 36th Ave. West PO Box 2607 Lynnwood, Washington 98036 U.S.A. T: 1-425-776-1880 F: 1-425-776-2760 E: [email protected] www.pletronics.com Model AXIOM10 Output CMOS Frequency Range (MHZ) Standard Frequencies (MHZ) AXIOM10HP High Stability AXION10S Stratum III Stratum IIIe AXIOM20 CMOS CMOS Sinewave AXION20S Stratum III AXIOM20-17 Cospas Sarsat AXION25 CMOS CMOS Sinewave D-74821 Mosbach Germany www.axtal.com AXIOM30 AXIOM30HP High Stability High Performance CMOS Sinewave AXION30S Stratum IIIe CMOS 10 - 120 10.0 10 - 12.8 10 - 80 10 - 20 60.75 10 - 80 10 - 40 10.0 10 - 20 10.0, 12.8, 19.44, 20.0 10.0 10.0, 12.8 10, 12.8, 16.384 12.8, 16.384, 19.44, 20.0 60.75 10.0, 12.8, 16.384 10.0, 12.8, 19.44, 20.0 10.0 10.0, 12.8, 20.0 AXIOM35 AXIOM40 High Stability High Stability Sinewave CMOS 10 - 40 5 - 40 10.0, 16.384, 10.0, 16.384, 20.0 20.0 AXION40S Stratum IIIe CMOS AXIOM45 High Stability AXIOM50 AXIOM70 CMOS AXIOM75 Sinewave AXIOM90 SMA out Sinewave AXIOM95 SMA out Sinewave AXIOM110500 SMA out AXIOM1602000 SMA out AXIOM260500 Vibration Prot AXIOM260 Sinewave Sinewave Sinewave Sinewave Environmental conditions Sinewave Sinewave 5 - 20 5 - 120 100-120 10 - 40 10-120 10 - 40 80 - 130 120 100 100 120 10.0, 12.8, 20.0 10.0, 16.384, 20.0 100, 120 10.0, 12.80, 19.44 10.0, 12.8, 100.0 10.0, 12.9, 20.0 96.0, 100.0, 116.0, 130.0 120.0 100.0 100.0 120.0 Frequency Stabilities (ppb) o Model Frequency Range (MHZ) Standard Frequencies (MHZ) Test Frequency Stabilities (ppb) Visual inspection, dimensions o Initial tolerance at 25 C ±500 ±50, ±20 typ ±500 typ ±500 ±500 typ ±2,000 ±500 typ ±500 max ±20 ±1000 ±500 max ±500 ±500 ±500 max ±500 max ±500 max ±500 max ±500 max ±500 typ ±0.1 max ±200 max ±500 max ±1,000 max vs. Temperature ±200, ±100, ±50, ±25, ±10, ±5 ±280 (III), ±10 (IIIe) ±500, ±300, ±200, ±100 ±280 ±2ppb/min for dT ±5oC/hr ±2ppb for 30oC shock ±500, ±300, ±200, ±100 ±200, ±100, ±50, ±25, ±10, ±5 ±5 ±10 ±200, ±100, ±50, ±25, ±10, ±5 ±100, ±50, ±25, ±10, ±5 ±10 ±100, ±50, ±25, ±10, ±5 ±200 typ ±500 max ±200, ±100, ±50, ±25, ±10, ±5 ±200, ±100, ±50, ±25, ±10, ±5 ±200, ±100, ±50, ±25 ±200, ±100, ±50, ±25 ±500 ±2,000 ±2,000 ±2,000 T1, ±3,000 T2 vs. Supply ±10 ±0.5 typ ±10 ±10 ±10 typ ±20 ±10 ±10 ±0.5 ±1 ±10 ±2 ±1 ±2 ±20 ±10 ±10 ±10 ±10 ±50 ±10 ±100 ±10 vs. Supply vs. Load Change ±10 ±0.5 ±10 typ ±20 ±10 typ ±20 ±20 ±10 ±0.5 ±1 ±10 ±2 ±1 ±2 ±20 ±10 ±5 ±10 ±10 ±50 ±10 ±100 ±10 vs. Load Change Long Term (aging)/day after 30 days operation ±10, ±2 ±0.5 --- --- ±40 --- --- ±10, ±2 ±0.5 --- ±10, ±2 --- --- --- ±2 ±10, ±2 ±10, ±2 ±10, ±2 ±10, ±2 ±70 ±70 ±70 ±10 Long Term (aging)/day after 30 days operation long term (aging) 1st year at 40oC, after 30 days ±200, ±100 ±30 ±200 ±500 ±800 --- ±500 ±200, ±100 ±30 --- ±200, ±100 ±200, ±100 --- ±200, ±100 ±1,000 max ±500 type ±200, ±100 ±200, ±100 ±200, ±100 ±200, ±100 ±2000 ±2000 --- ±100 long term, 5 years --- --- --- --- ±10 ppm --- --- --- --- --- --- --- --- --- --- --- --- --- ±2500 ±2500 --- long term, 10 years --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- long term, 15 years --- --- ±4.6 ppm --- ±4.6 ppm --- --- --- ±500 ±4.6 ppm --- --- ±4.6 ppm --- --- --- --- --- --- --- --- --- --- --- ±370 --- --- --- --- --- --- --- 12 --- --- --- --- --- --- 5 min. 5 min. 5 min. 2 min. 5 min. 2 min 2 min. 3 min. 5 typ, 105 max min. 5 min. 5 min. 5 min. 5 min. 5 min. 3 min. 5 min. 5 min. 5 min. 5 min. holdover stability o Warm-up time at 25 C IEC 60679-1 clause 4.3 4.6.2 Gross leak: Test Qc Fine Leak: Test QK Solder ability Resistance to heat 2-20 2-58 4.6.3 Test Ta (235±5)oC Method 1 Test Tb Method 1A, 5s Shock 2-27 4.6.8 Test each 3 x per axis 100g, 6 ms half-sine pulse 2-27 4.6.8 Test ache 3 x per axis 30g, 18 ms half-sine pulse Bump 2-29 4.6.6 Test Eb, 4,000 bumps per axis, 40g, 6mS long term (aging) 1st year at 40oC, after 30 days Free Fall 2-32 4.6.9 Test Ed procedure 1, 2 drops from 1m height --- long term, 5 years 4.6.7 ±1,500 long term, 10 years Vibration, sinusoidal 2-6 ±2,000 Test Fc, 30 min per axis, 10 Hz 55 Hz 0.75mm; 55Hz -2KHz, 10g --- --- --- long term, 15 years 2-6 4.6.7 Test Fc, 6 cycles per axis, 100 Hz -2KHz, 6g --- --- --- --- holdover stability 5 min. 5 min. 4 min. 80 sec. Rapid change of temperature 2-14 4..6.5 Test Na, 10 cycles at extremes of operating temperature range Dry Heat 2-2 4.6.14 Test Ba, 16 h at upper temperature indicated by climatic category Damp heat, cyclic 2-30 4.6.15 Test Db variant 1 severity, 55oC/85% R.H., 6 cycles. Cold 2-1 4.6.16 Test Aa, 2 h at lower temperature indicated by climatic category Climatic Sequence 1-7 4.6.17 Sequence 4.6.14, 4.6.15 (1st cycle), 4.6.16, 4.5.15 (5 cycles) Damp heat, steady state 2-3 4.6.18 Test Ca, 56 days 4.7.1 4.7.2 30 days @ 85oC, OCXO @ 25oC 1000h, 2000h, 8000h @ 85oC Warm-up time at 25oC ±3 min, ±1 typ ±1 min none ±2 min, ±5 max none none ±2 min, ±5 max ±3 min, ±0.8 min ±1 min none ±3 min, ±0.8 min ±3 min, ±0.8 min none ±5 min, ±0.8 min none ±3 min, ±0.8 min ±3 min, ±0.8 min ±3 min, ±1 min ±3 min, ±1 min ±2 min, ±5 max none ±1.5 ±1.6 Electronic Frequency Control (EFC) (ppm) EFC Voltage nominal 50% VS 2.5 --- 50% VS --- --- 50% VS 50% VS 2.5 --- 50% VS 50% VS --- 2.5V --- 50% VS 50% VS 1.65V, 2.5V 1.65V, 2.5V 0.0V --- 2.5 0.0V EFC Voltage nominal EFC Range 5/95% VS 0 to VREF --- 5/95% VS --- --- 5/95% VS 5/95% VS 0 to 5V --- 5/95% VS 5/95% VS --- 0.25 to 4.75V --- 5/95% VS 5/95% VS 0.15-3.15V 0.25-4.75V 0.15-3.15V 0.25-4.75V ±4.0V --- 0 to 5V ±4.0V EFC Range EFC Slope Positive Positive --- Positive --- --- Positive Positive Positive --- Positive Positive --- Positive --- Positive Positive Positive Positive Positive --- Positive Positive EFC Slope 100K 100K --- 100K --- --- 100K 100K 100K --- 100K 100K --- 100K --- 100K 100K 100K 100K 50K --- 50K 10K EFC Input impedance Load 15pF 50 ohms 15pF 15pF 15pF 15pF 50 ohms 15pF 50 ohms 15pF 50 ohms 15pF 15pF 50 ohms 50 ohms 15pF 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms 50 ohms Load Level 5/95% VS +5/+10dBm 5/95% VS 5/95% VS 5/95% VS 5/95% VS +3dBm min 5/95% VS +5/+10dBm 5/95% VS +3dBm min 5/95% VS 5/95% VS +3dBm min +11dBm min +15dBm max 5/95% VS +7dBm min +3dBm min +3dBm min +10dBm +14dBm +10dBm min +15dBm max +5dBm min +9dBm max +5dBm min +9dBm max Level Phase Noise (dBc/Hz) 1Hz 10Hz 100Hz 1KHz 10KHz 100KHz 1MHz --- -100 typ -130 typ -145 max -150 max -150 max -150 max --- --- --- --- --- -100 typ -130 typ -145 max -150 max -150 max -150 max ---90 typ -120 typ -140 typ -145 typ -145 typ --- ---120 -140 -145 -150 -150 ---90 typ -120 typ -140 typ -145 typ -145 typ --- ---90 typ -120 typ -150 typ -165 typ -165 typ --- -----140 typ -150 typ -155 type -160 typ --- --- -95 typ -120 typ -140 typ -145 typ -145 typ ---90 -120 -155 -165 -170 -------149 typ -160 typ -165 typ -165 typ Vib. ---115 -85 typ -145 -136 typ -155 -145 typ -160 -155 typ Std Vib. - 85 -55 typ -115 -55 typ -145 -125 typ -165 -155 typ -168 -168 typ 1Hz Phase Noise (dBc/Hz) 10Hz 100Hz 1KHz 10KHz 100KHz 1MHz Short term stability τ=1S (Allan deviation) τ=10S τ=100S --- 5 * 10-12 typ 1 * 10-11 typ 1 * 10-10 max --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Std --- -20 --- --- --- --- -20 --- -20 --- -20 --- --- -20 -30 --- -30 -30 -30 -30 -30 --- -30 Harmonics (dBc) Non-harmonics (dBc) --- --- --- --- --- --- --- --- --- --- --- --- --- --- -80 --- -90 -50 -50 -85 --- — -80 Non-harmonics (dBc) Oven Alarm no yes, CMOS no no no no no no yes, CMOS no no no no no no no no no no no no no no Oven Alarm Reference Voltage Output 3.0V 3.0V no no no no no 3.0 5.0V no 3.0 3.0 no 3.0 no no no no no no no no no Reference Voltage Output Supply Voltage (VS) 3.3, 5.0 12 3.3, 5.0 3.3, 5.0 3.3, 5.0 5.0V osc 5.0V oven 3.3, 5.0 3.3, 5.0 12 3.3, 5.0 5.0, 12.0 5.0, 12.0 3.3, 5.0 5.0, 12.0 12.0 3.3, 5.0 5.0, 12.0 3.3, 5.0, 12.0 3.3, 5.0, 12.0 15.0 12.0 8.0 15.0 Supply Voltage (VS) Current Steady State 25C (mA) 3.3V, 300 5.0V, 250 100 3.3V, 300 5.0V, 250 3.3V, 300 5.0V, 200 3.3V, 300 5.0V, 250 15 osc 100 oven 3.3V, 300 5.0V, 200 3.3V, 300 5.0V, 200 100 3.3V, 300 5.0V, 250 5.0V, 200 12V, 100 5.0V, 200 12V, 80 3.3V, 350 5.0V, 250 5.0V, 200 12V, 80 100 3.3V, 350 5.0V, 250 5.0V, 200 12V, 80 3.3V, 400 5.0V, 300 12V, 150 3.3V, 400 5.0V, 300 12V, 150 350 270 310 150 Current Steady State 25oC (mA) Current Turn-On (mA) 3.3V, 800 5.0V, 500 350 3.3V, 800 5.0V, 500 3.3V, 800 5.0V, 500 3.3V, 800 5.0V, 500 400 (Cl.1) 300 (Cl.2) 3.3V, 800 5.0V, 500 3.3V, 800 5.0V, 500 340 3.3V, 800 5.0V, 500 5.0V, 500 12V, 250 5.0V, 500 12V, 200 3.3V, 800 5.0V, 500 5.0V, 500 12V, 200 300 3.3V, 900 5.0V, 600 5.0V, 500 12V, 200 3.3V, 1000 5.0V, 800 12V, 400 3.3V, 1000 5.0V, 800 12V, 400 500 Specified Temperature (oC) -10 / +60 -10 / +60 -40 / +80 (III) 0 / +70 (IIIe) -10 / +60 -40 / +80 -40/+55(Cl.1) -20/+55(Cl.2) -10 / +60 -10 / +60 -20 / +70 0 / +70 0 / +50 -10 / +60 -10 / +60 0 / +70 -20 / +70 -10 / +60 -20 / +70 -10 / +60 -20 / +70 -10 / +60 -20 / +70 -20 / +70 -40 / +85 -40 / +85 -40 / +75 -40 / +85 Specified Temperature (oC) Operable Temperature (oC) -20 / +70 -20 / +70 --- -30 / +70 -45 / +90 -45 / +60 -30 / +75 -20 / +70 -20 / +70 -25 / +80 -20 / +70 -30 / +75 -30 / +75 -30 / +75 -40 / +85 -30 / +75 -30 / +75 -25 / +75 -25 / +75 -45 / +90 -45 / +90 -45 / +80 -45 / +90 Operable Temperature (oC) Storage Temperature (oC) -40 / +85 -40 / +85 -40 / +85 -40 / +85 -40 / +90 -45 / +105 -40 / +85 -40 / +85 -40 / +85 -45 / +90 -40 / +85 -40 / +85 -40 / +85 -40 / +85 -55 / +105 -40 / +85 -40 / +85 -40 / +85 -40 / +85 -50 / +100 -60 / +100 -55 / +105 -55 / +105 Storage Temperature (oC) 5 10 10 30 100 AXIOM110 Series 40 AXIOM160 75 75 10 AXIOM10 Series SMD 9 5 5 AXIOM20 Series 5 DIP / DIL 10 10 AXIOM30 Series 30 30 AXIOM40 Euro Package 22 x 25 mm base 0.866 x 0.984 inch base DIL 13 x 20 mm base DIP 0.511 x 0.787 inch base 20 x 20 mm base 0.787 x 0.787 inch base 27 x 36 mm base 1.063 x 1.420 inch base 50 x 50 x 20.5 mm 1.970 x 1.970 x 0.810 inch 25.4 x 25.4 mm base 1.000 x 1.000 inch base 1 EFC 2 VREF 3 VS 4 RF 5 n.c. 6 n.c. 7 Gnd 1 EFC 7 Gnd 8 RF 14 VS 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 VS RF Gnd EFC VREF EFC VREF VS RF Gnd n.c. n.c. RF Gnd VS 54 x 40 x 20 mm 2.125 x 1.575 x 0.787 inches 60 AXIOM50 Series 10 10 AXIOM70 Series 50 x 40 x 20 mm 1.968 x 1.575 x 0.787 inches 50 50 AXIOM90 Series 580 625 550 Endurance tests - aging - extended aging For high shock AXIOM260-500 OCXO with shock absorber mounts Test Reference Altitude τ=1S Short term stability τ=10S (Allan deviation) τ=100S Harmonics (dBc) 10 Enclosures styles as in IEC 60679-3 or 61837, if applicable 2-17 vs. Temperature Frequency adjustment 5 * 10-12 typ 1 * 10-11 typ 1 * 10-10 max Test Condition Initial tolerance at 25 C Electronic Frequency Control (EFC) (ppm) Weight (grams) IEC 60068 Part Sealing tests Frequency adjustment EFC Input impedance Typical for these OCXOs see datasheet for those applied to each OCXO type Output Sea level to 55,000 feet Vibration, random MIL-STD-810C 20Hz 0.04g2/Hz 1000Hz 0.04g2/Hz 2000Hz 0.46g2/Hz all three axis 7.6g R.M.S. Mechanical shock MIL-STD-810E Method 561.4 Procedure I, VI Endurance tests (aging) MIL-PRF55310 30 days operation at 25oC For high shock AXIOM260 OCXO with shock absorber mounts Current Turn-On (mA) Test 40.6 x 38.1 x 19.1 mm 1.600 x 1.500 x 0.750 inches Test Condition Reference Altitude Vibration, random Sea level to 55,000 feet MIL-PRF55310 Weight (grams) AXIOM260 58.3 x 48.3 x 22.8 mm 2.295 x 1.900 x 0.900 inches RF Gnd EFC n.c. VS 1 Test Condition 15Hz 0.06g2/Hz 300Hz 0.2g2/Hz 1000Hz 0.2g2/Hz 2000Hz 0.06g2/Hz all three axis Acceleration, linear 40g for 60 seconds Acceleration, angular 9,000dec/seconds2 at 25 Hz along spinning axis Moisture Resistance 0 to 85% RH, including condensation, operating and non operating Salt spray MIL-STD-810 Procedure 1, method 509.1 Fungus MIL-STD-454 Requirement 4 EMI MIL-STD-461B MIL-STD-462 Part 1 CE03; CS01; CS02; RE02; RS03 Endurance tests (aging) MIL-PRF55310 30 days operation at 25oC specified on specific types only