MAD100 MAD100 SERIES 2 X 3 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 100Watts FEATURES APPLICATIONS • LOW STANDBY POWER CONSUMPTION UNDER 0.3 WATT • WIDE INPUT VOLTAGE RANGE 85 TO 264VAC, 47 TO 63HZ • ACTIVE POWER FACTOR CORRECTION • BUILT-IN EMI FILTER • OUTPUT VOLTAGE ADJUSTABLE • OPEN FRAME DIMENSIONS 2.00 X 3.00 X 1.16 INCH • 4000VAC INPUT TO OUTPUT 2MOPP INSULATION • PROTECTION TYPE CLASS I AND CLASS II • LOW LEAKAGE CURRENT UNDER 75µA • OPERATING ALTITUDE 5000M • 5 YEAR WARRANTY • ANSI/AAMI ES60601-1, EN60601-1, & IEC60601-1 3rd EDITION SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 4000VAC ISOLATION OCP SCP OVP • MEDICAL EQUIPMENT LOW STANDBY POWER PART NUMBER STRUCTURE M A D 100 U S 12 Application Package Code Dimension Code Output Power (W) Input Voltage (VAC) Output Quantity Output Voltage (VDC) U:Universal S:Single 12: 12V No suffix: CLASS I 15: 15V B: CLASS II Medical Application A: Open type U: U chassis type 85 ~ 264VAC E: Enclosed type 24: 24V D: Din rail type 28: 28V Protection Type 36: 36V 48: 48V 1 www.PDUKE.com 2015/3/16 MAD100 TECHNICAL SPECIFICATION All specifications are typical at 230VAC input, full load and 25℃ otherwise noted Input Range Output Voltage Output Current Natural convection Input Power No Load Efficiency VAC VDC A W % 85 ~ 264 12 8.34 0.3 91 85 ~ 264 15 6.67 0.3 92 85 ~ 264 24 4.17 0.3 92 85 ~ 264 28 3.58 0.3 92 85 ~ 264 36 2.78 0.3 91 85 ~ 264 48 2.09 0.3 91 Model Number MAD100US12 MUD100US12 MED100US12 MDD100US12 MAD100US15 MUD100US15 MED100US15 MDD100US15 MAD100US24 MUD100US24 MED100US24 MDD100US24 MAD100US28 MUD100US28 MED100US28 MDD100US28 MAD100US36 MUD100US36 MED100US36 MDD100US36 MAD100US48 MUD100US48 MED100US48 MDD100US48 INPUT SPECIFICATIONS Parameter Operating input voltage range Input frequency Input current No load input power Leakage current Power Factor Start up time Rise time Hold up time Input inrush current Input protection 2 Conditions AC input DC input AC input 115VAC and Full Load 230VAC and Full Load 230VAC 264VAC Min. Typ. 85 120 47 Max. Unit 264 370 63 1.15 0.55 0.3 75 VAC VDC Hz A Watts µA 0.95 1000 20 115VAC and Full Load 230VAC Internal fuse in line and neutral www.PDUKE.com 16 60 T3.15A/250VAC ms ms ms A 2015/3/16 MAD100 OUTPUT SPECIFICATIONS Parameter Output power Initial set voltage accuracy Line regulation Load regulation Voltage adjustability Minimum load Ripple and noise Temperature coefficient Transient response Over voltage protection Over load protection Short circuit protection Conditions 230VAC and Full Load Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load 12Vout 15Vout 24Vout 28Vout 36Vout 48Vout Max. Unit 100 +1.0 +0.2 +0.5 +0.4 +10 Watts % % 120 150 160 180 190 340 -0.02 Peak deviation Recovery time Load step form 50 ~ 75% change at 2.5A/µs % of Vout(nom); Latch mode % of Iout rated; Hiccup mode Conditions 1 minute (2MOPP insulation) Isolation resistance Switching frequency Safety approvals 500VDC Weight Min. Input to Output Input (Output) to F.G. 4000 1500 0.1 MIL-HDBK-217F Ta=25℃, Full load Conditions Natural convection Min. With derating Non-condensing www.PDUKE.com % % % mVp-p %/℃ % Vout µs 500 115 135 % 115 150 % Continuous, automatics recovery MAD MUD MED MDD ENVIRONMENTAL SPECIFICATIONS Parameter 3 -1.0 -0.2 -0.5 -0.4 -10 Measured by 20MHz bandwidth With a 10µF/25V 1206 X7R MLCC With a 10µF/25V 1206 X7R MLCC With a 1µF/50V 1206 X7R MLCC With a 1µF/50V 1206 X7R MLCC With a 1µF/50V 1206 X7R MLCC With a 0.1µF/100V 1206 X7R MLCC Isolation voltage Operating ambient temperature Storage temperature range Operating altitude Thermal shock Shock Vibration Relative humidity Typ. 0 GENERAL SPECIFICATIONS Parameter MTBF Min. -25 -40 +0.02 3 Typ. Max. Unit VAC GΩ 60 kHz ANSI/AAMI ES60601-1 EN60601-1 IEC60601-1 156g (5.50oz) 194g (6.84oz) 210g (7.41oz) 232g (8.18oz) 7.903 x 105 hrs Typ. Max. Unit +85 ℃ +85 ℃ 5000 m MIL-STD-810F IEC68-2-27 IEC68-2-6 5% to 95% RH 2015/3/16 MAD100 EMC SPECIFICATIONS Parameter Conditions EMI EN55011, EN55022 and FCC Part 18 Harmonic currents Voltage flicker ESD Radiated immunity Fast transient Surge Conducted immunity Power frequency magnetic field EN61000-3-2 EN61000-3-3 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Dip and interruptions EN60601-1-2 Level Conducted Radiated Full Load Class B Class A Class A and D Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV DM ± 1kV and CM ± 2kV 20 Vr.m.s 10 A/m 30% 60% 230VAC 50Hz >95% >95% 30% 60% 100VAC 50Hz >95% >95% Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B 500mS 100mS 10mS 5000mS 500mS 100mS 10mS 5000mS CHARACTERISTIC CURVE Derating Curve vs. Ambient Temperature MED100 & MDD100 Derating Curve vs. Ambient Temperature MAD100 & MUD100 Derating Curve vs. Input Voltage M D100 Efficiency vs. Output Load M D100US24 4 Efficiency vs. Input Voltage M D100US24 www.PDUKE.com 2015/3/16 MAD100 MECHANICAL DRAWING MAD Open type MED Enclosed type MDD Din rail type MUD U chassis type 1. All dimensions in inch (mm) 2. Tolerance : x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. M3×0.5 screw locked torque MAX 5Kgf.cm/0.49N.m CONNECTORS CONNECTIONS CON1 – Input Connector Pin 1 Pin 3 CON2 – Output Connector Line Neutral Mates with JST housing : VHR-3N JST crimp terminals : SVH-21T-P1.1 5 Pin 1,2 Pin 3,4 Mounting holes marked with must be connected to safety earth for CLASS I application www.PDUKE.com -Vout +Vout Mates with JST housing : VHR-4N JST crimp terminals : SVH-21T-P1.1 2015/3/16