FKC08 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 8 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 mA 2000 1500 666 533 ±800 ±333 ±267 2000 1500 666 533 ±800 ±333 ±267 2000 1500 666 533 ±800 ±333 ±267 mA 10 15 13 20 15 20 20 10 30 13 15 15 15 13 7 8 10 10 8 8 7 % 80 83 88 87 83 87 85 80 83 86 85 82 86 85 80 83 86 86 85 87 87 µF 3300 1600 350 240 ±1000 ±160 ±100 3300 1600 350 240 ±1000 ±160 ±100 3300 1600 350 240 ±1000 ±160 ±100 FKC08-12S33 FKC08-12S05 FKC08-12S12 FKC08-12S15 FKC08-12D05 FKC08-12D12 FKC08-12D15 FKC08-24S33 FKC08-24S05 FKC08-24S12 FKC08-24S15 FKC08-24D05 FKC08-24D12 FKC08-24D15 FKC08-48S33 FKC08-48S05 FKC08-48S12 FKC08-48S15 FKC08-48D05 FKC08-48D12 FKC08-48D15 PART NUMBER STRUCTURE FKC08 - 48 Series Name Input Voltage (VDC) 12: 9~18 24:18~36 48:36~75 S Output Quantity S:Single D: Dual 1 05 - SMD Output Voltage (VDC) 33: 3.3 05: 5 12:12 15:15 Mounting Type Option : DIP type SMD: SMD type 05:± 5 12:±12 15:±15 www.PDUKE.com 2015/2/26 FKC08 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time Constant resistive load Input surge voltage 100 ms, max. Input reflected ripple current Input filter Remote ON/OFF Referred to –Vin pin DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current Low Line to High Line at Full Load No Load to Full Load DIP type Asymmetrical load 25%/100% FL 20MHz bandwidth Case material Base material Potting material Weight MTBF 1 minute VDC ms VDC -0.5 mAp-p Pi type Open or 3.5 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 2.5 Typ. -1.0 -0.2 -0.5 -1.0 -1.0 -1.0 -5.0 mA mA Max. Unit +1.0 +0.2 +0.5 +1.0 +1.0 +1.0 +5.0 % % % % mVp-p -0.02 +0.02 %/ 200 µs 150 % Continuous, automatics recovery 50 Min. Input to Output Input (Output) to Case Input to Output Input (Output) to Case 500VDC 1600 1600 1600 1000 1 270 MIL-HDBK-217F Conditions Operating ambient temperature 2 Single Dual Single Dual Dual Conditions DIP type ENVIRONMENTAL SPECIFICATIONS Parameter Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Unit 18 36 75 Min. 25% load step change % of Iout rated SMD type Isolation resistance Isolation capacitance Switching frequency Safety approvals Max. 12 24 48 700 5 36 50 100 Conditions GENERAL SPECIFICATIONS Parameter Isolation voltage Typ. 9 18 36 Positive logic SMD type Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection Min. 20 OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) Min. Without derating With derating Typ. GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 3.543 x 106 hrs 300 330 Typ. -40 +70 Max. Unit +70 +100 100 +125 20 www.PDUKE.com Unit VDC -55 Natural convection Max. /W MIL-STD-810F MIL-STD-810F 5% to 95% RH 2015/2/26 FKC08 EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Note: 1. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FKC08-48S05 Derating Curve FKC08-48S05 Efficiency vs. Input Voltage FKC08-48S05 Efficiency vs. Output Load MECHANICAL DRAWING DIP type PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 SMD type NC NC PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 Others NC NC NC DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout 16 14 -Vout +Vout Common +Vout DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout NC 16 14 -Vout +Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26