FKC12W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 12 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 VDC 3.3 5.1 12 15 ±5 ±12 ±15 3.3 5.1 12 15 ±5 ±12 ±15 mA 3500 2400 1000 800 ±1200 ±500 ±400 3500 2400 1000 800 ±1200 ±500 ±400 mA 55 55 13 11 15 12 20 17 20 6 6 7 7 7 % 84 87 87 87 84 87 87 84 87 87 88 85 87 87 µF 2000 2000 430 300 ±1250 ±200 ±120 2000 2000 430 300 ±1250 ±200 ±120 FKC12-24S3P3W FKC12-24S05W FKC12-24S12W FKC12-24S15W FKC12-24D05W FKC12-24D12W FKC12-24D15W FKC12-48S3P3W FKC12-48S05W FKC12-48S12W FKC12-48S15W FKC12-48D05W FKC12-48D12W FKC12-48D15W PART NUMBER STRUCTURE FKC12 - 48 Series Name Input Voltage (VDC) 24: 9~36 48:18~75 S Output Quantity S:Single D: Dual 1 05 W - SMD Output Voltage (VDC) 33: 3.3 05: 5.1 12:12 15:15 Input Range 4:1 Mounting Type Option : DIP type SMD: SMD type 05:± 5 12:±12 15:±15 www.PDUKE.com 2015/2/26 FKC12W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) Start up voltage Shutdown voltage Start up time Constant resistive load Input surge voltage 100 ms, max. Input reflected ripple current Input filter Remote ON/OFF Referred to –Vin pin Over load protection Short circuit protection Case material Base material Potting material Weight MTBF DIP type Asymmetrical load 25%/100% FL 20MHz bandwidth VDC VDC VDC ms VDC Single Dual Single Dual Dual mAp-p Pi type Open or 3.0 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 2.5 Typ. -1.2 -0.2 -0.5 -1.0 -1.0 -1.0 -5.0 Unit +1.2 +0.2 +0.5 +1.0 +1.0 +1.0 +5.0 % % 85 3.3Vout 5.1Vout 12Vout 15Vout % of Iout rated 1 minute Conditions DIP type 500VDC 1600 1600 1600 1000 1 360 MIL-HDBK-217F Conditions 3.3Vout, ±5Vout Others Min. Without derating With derating Without derating With derating Typ. Max. Unit GΩ pF 400 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 2.087 x 106 hrs 1500 440 Typ. -40 +61 -40 +69 Max. Unit +61 +105 +69 +105 105 +125 20 www.PDUKE.com % mVp-p %/ µs VDC -55 Natural convection % +0.02 250 3.9 6.2 VDC 15 18 150 % Continuous, automatics recovery Min. Input to Output Input (Output) to Case Input to Output Input (Output) to Case mA mA Max. -0.02 Operating ambient temperature 2 -0.5 Min. 25% load step change ENVIRONMENTAL SPECIFICATIONS Parameter Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Unit 50 100 DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current Low Line to High Line at Full Load No Load to Full Load SMD type Isolation resistance Isolation capacitance Switching frequency Safety approvals 36 75 9 18 8 16 450 5 Conditions GENERAL SPECIFICATIONS Parameter Isolation voltage Max. 24 48 Positive logic SMD type Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over voltage protection Typ. 9 18 20 OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Min. /W MIL-STD-810F MIL-STD-810F 5% to 95% RH 2015/2/26 FKC12W EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Note: 1. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FKC12-48S05W Derating Curve FKC12-48S05W Efficiency vs. Input Voltage FKC12-48S05W Efficiency vs. Output Load MECHANICAL DRAWING DIP type PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 SMD type NC NC PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 Others NC NC NC DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout 16 14 -Vout +Vout Common +Vout DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout NC 16 14 -Vout +Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26