UFED40W UFED40W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 40Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • APPLICATION OF CHASSIS-MOUNT DC/DC CONVERTERS • SCREW TERMINALS FOR INPUT AND OUTPUT CONNECTIONS • INTERNAL INPUT FUSE PROTECTION • INTERNAL OUTPUT LED INDICATOR • MEET EN55022 CLASS B • SAFETY MEETS UL60950-1, EN60950-1, IEC60950-1, & EN50155 • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL OCP SCP UVP • RAILWAY SYSTEM • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT OVP FUSE INCLUDED INRUSH LIMIT REVERSE POLARITY PROTECTION LOW STANDBY POWER TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number UFED40-24S3P3W UFED40-24S05W UFED40-24S12W UFED40-24S15W UFED40-24S24W UFED40-24D12W UFED40-24D15W UFED40-24D24W UFED40-48S3P3W UFED40-48S05W UFED40-48S12W UFED40-48S15W UFED40-48S24W UFED40-48D12W UFED40-48D15W UFED40-48D24W UFED40-110S3P3W UFED40-110S05W UFED40-110S12W UFED40-110S15W UFED40-110S24W UFED40-110D12W UFED40-110D15W UFED40-110D24W Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) VDC 9.5 ~ 36 9.5 ~ 36 9.5 ~ 36 9.5 ~ 36 9.5 ~ 36 9.5 ~ 36 9.5 ~ 36 9.5 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 VDC 3.3 5 12 15 24 ±12 ±15 ±24 3.3 5 12 15 24 ±12 ±15 ±24 3.3 5 12 15 24 ±12 ±15 ±24 mA 10000 8000 3333 2666 1666 ±1666 ±1333 ±833 10000 8000 3333 2666 1666 ±1666 ±1333 ±833 10000 8000 3333 2666 1666 ±1666 ±1333 ±833 mA 19 19 19 19 19 19 19 19 14 14 14 14 14 14 14 14 10 10 10 10 10 10 10 10 % 89 90 91 91 90 89 89 90 89 90 91 91 90 89 89 90 87 88 89.5 90 89 88 88 90 µF 26600 20000 3900 2600 1300 ± 2600 ± 1600 ±650 26600 20000 3900 2600 1300 ± 2600 ± 1600 ±650 26600 20000 3900 2600 1300 ± 2600 ± 1600 ±650 PART NUMBER STRUCTURE UFED40 Series Name 48 Input Voltage (VDC) 24: 9.5~36 48: 18~75 110: 43~160 S Output Quantity S: Single D: Dual 1 05 W - Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 24: 24 12: ±12 15: ±15 24: ±24 Input Range 4:1 N EC Remote Control Option Assembly Option : Positive logic N: Negative logic www.PDUKE.com : EC: DR: ED: No Assembly Option Enclosed Mounting Type Din Rail Mounting Type Enclosed & Din Rail Mounting Type 2014/6/5 UFED40W INPUT SPECIFICATIONS Parameter Conditions 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) Operating input voltage range Input fuse (slow blow) In-rush current Start-up voltage 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) 110Vin(nom) Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of CTRL pin Remote off input current Shutdown voltage Start up time Constant resistive load Input surge voltage 1 second, max. Remote ON/OFF Referenced to –Vin pin OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Load regulation 3.3Vout Others Low Line to High Line at Full Load No Load to Full Load Cross regulation Voltage adjustability Asymmetrical load 25%/100% FL Single output Ripple and noise Measured by 20MHz bandwidth Temperature coefficient Transient response recovery time Over voltage protection Output indicator Over load protection Short circuit protection 3.3Vout 5Vout 12Vout 15Vout 24Vout % of Iout rated Isolation voltage 1 minute Isolation resistance Isolation capacitance Switching frequency Safety meets 500VDC 2 Typ. Max. Unit 9.5 18 43 24 48 110 8 4 2 15 36 75 160 VDC A A 9.5 18 43 8 16 40 100 60 -0.5 Min. VDC VDC ms 50 VDC 100 170 Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC 1 mA 5 mA Typ. -1.5 -1.0 -0.5 -1.5 -1.0 -5.0 -10 -10 Max. Unit +1.5 +1.0 +0.5 +1.5 +1.0 +5.0 +10 +20 % 75 100 150 % % % % mVp-p +0.02 %/℃ 250 µs 3.9 6.2 15 VDC 20 30 Green LED 150 % Continuous, automatics recovery -0.02 25% load step change Zener diode clamp GENERAL SPECIFICATIONS Parameter Chassis material Weight MTBF 3.3Vout, 5Vout Others Dual 3.3Vout, 5Vout, 12Vout 15Vout, 24Vout 3.3Vout, 5Vout 12Vout, 15Vout 24Vout Min. Conditions Input to Output Input (Output) to Chassis Min. 225 MIL-HDBK-217F, Full load www.PDUKE.com Typ. 1600 1600 1 Max. Unit VDC 4000 250 GΩ pF 275 kHz UL60950-1 EN60950-1 IEC60950-1 EN50155 Aluminum 110g (3.88oz) 1.944 x 106 hrs 2014/6/5 UFED40W ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Over temperature protection Storage temperature range Thermal shock Shock Vibration Relative humidity Max. +63 +96 +115 -40 Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Typ. -40 +63 Case of DC/DC module EMC SPECIFICATIONS Parameter EMI ESD Radiated immunity Fast transient Surge Conducted immunity Min. without derating with derating Unit ℃ ℃ ℃ +105 MIL-STD-810F EN61373, MIL-STD-810F EN61373, MIL-STD-810F 5% to 95% RH Level Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV ± 1kV 10 Vr.m.s Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. Test by minimum input and constant resistive load. CHARACTERISTIC CURVE UFED40-48S05W Derating Curve 3 UFED40-48S05W Efficiency vs. Input Voltage www.PDUKE.com UFED40-48S05W Efficiency vs. Output Load 2014/6/5 UFED40W MECHANICAL DRAWING CHASSIS MOUNTING TYPE PIN CONNECTION PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin 3 Ctrl Ctrl 4 NC NC 5 -Vout -Vout 6 +Vout Common 7 NC +Vout NC No Connection Screw terminals – wire range from 14 to 18 AWG ※ ※ : ENCLOSED MOUNTING TYPE DIN RAIL MOUNTING TYPE 1. All dimensions in Inch (mm) 2. Tolerance : X.XX±0.02 (X.X±0.5) 4. Tolerance : X.XXX±0.01 (X.XX±0.25) 3. Hole screw locked torque : MAX 5.0kgf cm (0.49N m) 4. Terminal screw locked torque : MAX 2.5kgf cm (0.25N m) - - 4 www.PDUKE.com - - 2014/6/5