ASR01-SERIES DC-DC CONVERTER -7VDC~-32VDC WIDE INPUT RANGE UP TO 15Watts FEATURES APPLICATIONS • PIN-OUT COMPATIBLE WITH LM79XX LINEAR REGULATORS • SMALL SIZE AND LOW PROFILE : 0.46 X 0.30 X 0.65 INCH • LOW STANDBY POWER • OVER-CURRENT PROTECTION • SHORT CIRCUIT PROTECTION • OVER-TEMPERATURE PROTECTION • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH LOW STANDBY POWER NON IOSOLATION • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT OCP SCP OTP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number ASR01-12S05 ASR01-12S5P2 ASR01-12S06 ASR01-12S08 ASR01-24S09 ASR01-24S12 ASR01-24S15 Input Range Output Voltage VDC -7 ~ -32 -7 ~ -32 -8 ~ -32 -10.5 ~ -32 -11.5 ~ -32 -15 ~ -32 -18 ~ -32 VDC -5 -5.2 -6 -8 -9 -12 -15 Output Current @Min.Load A -0.1 -0.1 -0.1 -0.1 -0.1 -0.1 -0.1 @FullLoad A -1 -1 -1 -1 -1 -1 -1 Input Current @ No Load mA -3 -3 -3 -3 -3 -3 -3 Efficiency Min.Vin % 91.5 92.0 92.5 94.0 94.5 96.0 96.0 Max.Vin % 84.5 85.0 86.5 89.0 90.5 92.0 93.5 Maximum Capacitor Load µF 1600 1600 1000 1000 1000 470 470 PART NUMBER STRUCTURE ASR01 Series Name 1 12 Input Voltage (VDC) 12: -7 ~ -32 -8 ~ -32 -10.5 ~ -32 24: -11.5 ~ -32 -15 ~ -32 -18 ~ -32 S Output Quantity S: Single 05 - Output Voltage (VDC) 05: -5 5P2: -5.2 06: -6 08: -8 09: -9 12: -12 15: -15 A Assembly Option :Standard A:Horizontal type www.PDUKE.com 2014/04/30 ASR01 INPUT SPECIFICATIONS Parameter Operating input voltage range Start up time Rise time Input reflected ripple current Maximum input current Input filter Conditions ASR01-12S05 ASR01-12S5P2 ASR01-12S06 ASR01-12S08 ASR01-24S09 ASR01-24S12 ASR01-24S15 Constant resistive load Power up Time for Vo to rise from 10% to 90% of Vo -12Vin(nom) -24Vin(nom) Vin=Vin(min); Io=Io(max) OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Measured by 20MHz bandwidth Temperature coefficient Dynamic load response Over load protection Short circuit protection Max. Unit -12 -12 -12 -12 -24 -24 -24 15 10 100 100 -32 -32 -32 -32 -32 -32 -32 VDC Min. Standard type Suffix-A -5Vout -5.2Vout -6Vout -8Vout -9Vout -12Vout -15Vout mAp-p % of Iout rated; Hiccup mode Conditions 12S05,12S5P2 Others Unit +2.0 +1.0 +0.5 +0.6 % % % mVp-p ℃ +0.015 %/ 5 %Vo 250 µs -2.0 A Continuous, automatics recovery Min. Typ. Max. Unit 323 425 380 500 437 575 kHz Safety meets UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Silicone (UL94 V-0) 3.1g(0.11oz) 8.475 x 106 hrs Case material Potting material Weight MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter A Max. 50 50 75 75 75 75 75 Peak deviation Recovery time 50% load step change Switching frequency Operating temperature range Over temperature protection Storage temperature range Thermal shock Vibration Relative humidity ms ms -0.015 GENERAL SPECIFICATIONS Parameter MTBF Typ. -2.0 -1.0 -0.5 -0.6 Low Line to High Line at Full Load Ripple and noise Typ. -7 -7 -8 -10.5 -11.5 -15 -18 -1 Capacitor type Conditions 10% Full Load to Full Load Min. Conditions Min. Typ. -40 Internal IC junction +85 +165 -55 Max. Unit ℃ ℃ ℃ +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH CAUTION: This power module is not internally fused. An input line fuse must always be used. 2 www.PDUKE.com 2014/04/30 ASR01 CHARACTERISTIC CURVE ASR01-12S05 Derating Curve ASR01-12S05 Efficiency VS Input Voltage ASR01-12S05 Efficiency VS Output Load MECHANICAL DRAWING FOR STARDANDS ASR01-S Vertical SIP type PIN CONNECTION PIN DEFINE 1 GND 2 -Vin 3 -Vout 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) MECHANICAL DRAWING FOR SUFFIX-A ASR01-S-A Horizontal SIP type PIN CONNECTION PIN DEFINE 1 GND 2 -Vin 3 -Vout 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) 3 www.PDUKE.com 2014/04/30