SDS02 SDH02 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 2.01 WATTS FEATURES APPLICATIONS • ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED • SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS ACCORDING IPC J-STD-020D • NO MINIMUM LOAD REQUIRED • CONTINUOUS SHORT CIRCUIT PROTECTION • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1 • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number SDS(H)02-05S3P3 SDS(H)02-05S05 SDS(H)02-05S12 SDS(H)02-05S15 SDS(H)02-05S24 SDS(H)02-05D05 SDS(H)02-05D12 SDS(H)02-05D15 SDS(H)02-12S3P3 SDS(H)02-12S05 SDS(H)02-12S12 SDS(H)02-12S15 SDS(H)02-12S24 SDS(H)02-12D05 SDS(H)02-12D12 SDS(H)02-12D15 SDS(H)02-24S3P3 SDS(H)02-24S05 SDS(H)02-24S12 SDS(H)02-24S15 SDS(H)02-24S24 SDS(H)02-24D05 SDS(H)02-24D12 SDS(H)02-24D15 SDS(H)02-48S3P3 SDS(H)02-48S05 SDS(H)02-48S12 SDS(H)02-48S15 SDS(H)02-48S24 SDS(H)02-48D05 SDS(H)02-48D12 SDS(H)02-48D15 0 Input Range VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 Output Voltage VDC 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 3.3 5 12 15 24 ±5 ±12 ±15 Output Current @Full Load mA 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 500 400 167 134 83 ±200 ±83 ±67 www.PDUKE.com Input Current @ No Load mA 34 34 42 42 42 42 42 42 24 24 28 28 28 28 28 28 10 10 14 14 14 14 14 14 7 7 8 8 8 8 8 8 Efficiency % 77 81 84 85 85 81 85 85 78 81 84 85 85 81 85 86 78 81 84 85 85 81 85 86 77 81 84 85 85 81 85 85 Maximum Capacitor Load µF 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 2200 1000 550 440 200 ±660 ±330 ±220 2014/04/30 SDS02 SDH02 PART NUMBER STRUCTURE SDS02 - 48 Series Name SDS: SMD type SDH: DIP type Input Voltage (VDC) 05: 4.5~9 12: 9~18 24:18~36 48:36~75 S 05 H Output Quantity Output Voltage (VDC) 3P3: 3.3 05: 5 12:12 15:15 24:24 Isolation Option S:Single D: Dual : Standard type 1600VDC isolation H: 3000VDC isolation 05:± 5 12:±12 15:±15 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Constant resistive load Input surge voltage 1 second, max. Input reflected ripple current(1) Input filter Remote ON/OFF Ctrl pin applied current via 1kΩ Application circuit DC-DC ON OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation 1 Typ. Max. 4.5 9 18 36 5 12 24 48 5 5 9 18 36 75 10 10 15 25 50 100 Unit VDC ms VDC 30 30 30 30 Capacitor type Open or high impedance 2.0 3.0 4.0 2.5 mAp-p mA mA DC-DC OFF Conditions Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection DC-DC ON DC-DC OFF Remote off input current Min. Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Single Dual Single Dual Dual 25% load step change www.PDUKE.com Min. Typ. -1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0 Max. Unit +1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0 % % % % mVp-p -0.02 +0.02 %/ 250 µs Continuous, automatics recovery 50 ℃ 2014/04/30 SDS02 SDH02 GENERAL SPECIFICATIONS Parameter Isolation voltage Isolation resistance Isolation capacitance Conditions Standard Suffix ”H” 1 minute 500VDC Max. MIL-HDBK-217F, Full load Operating ambient temperature Storage temperature range Thermal shock Vibration Relative humidity Lead-free reflow solder process Moisture sensitivity level(MSL) Conditions Without derating EMC SPECIFICATIONS Parameter Conditions EN55022 ESD EN61000-4-2 Radiated immunity Fast transient (2) Surge (2) Conducted immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Min. -40 -55 Unit VDC GΩ 50 50 100 ENVIRONMENTAL SPECIFICATIONS Parameter EMI (1) Typ. 1600 3000 1 Standard Suffix ”H” Switching frequency Safety meets Case material Base material Potting material Weight MTBF Min. pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Silicone (UL94 V-0) 2.7g (0.10oz) 6.670 x 106 hrs Typ. Max. Unit ℃ ℃ 85 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH IPC J-STD-020D IPC J-STD-033B Level 2 Level Class A, Class B Air ± 8kV Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The standard modules meet EMI Class A or Class B and input reflected ripple current only with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE SDS(H)02-48S05 Derating Curve 2 SDS(H)02-48S05 Efficiency vs. Input Voltage www.PDUKE.com SDS(H)02-48S05 Efficiency vs. Output Current 2014/04/30 SDS02 SDH02 MECHANICAL DRAWING SDS02 PIN CONNECTION PIN SINGLE 1 +Vin 2 -Vin 4 Ctrl 5 NC 6 -Vout 7 +Vout DUAL +Vin -Vin Ctrl -Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) SDH02 3 www.PDUKE.com 2014/04/30