SDS05W SDH05W SERIES

SDS05W
SDH05W
SERIES
DC-DC CONVERTER
4:1 ULTRA WIDE INPUT RANGE
UP TO 5.04 WATTS
FEATURES
APPLICATIONS
• ULTRA SMALL SMD AND DIP PACKAGE, 0.52 x 0.36x 0.40 INCH WITH REGULATED
• SMD PACKAGE QUALIFIED FOR LEADFREE REFLOW SOLDER PROCESS
ACCORDING IPC J-STD-020D
• NO MINIMUM LOAD REQUIRED
• CONTINUOUS SHORT CIRCUIT PROTECTION
• 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION
• SAFETY MEETS UL60950-1, EN60950-1, & IEC60950-1
• CE MARKED
• COMPLIANT TO RoHS II & REACH
3000VDC
ISOLATION
1600VDC
ISOLATION
REMOTE
CONTROL
OCP
• WIRELESS NETWORK
• TELECOM/DATACOM
• INDUSTRY CONTROL SYSTEM
• MEASUREMENT EQUIPMENT
• SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25
Model
Number
Input Range
Output Voltage
VDC
9 ~ 36
9 ~ 36
9 ~ 36
9 ~ 36
9 ~ 36
9 ~ 36
9 ~ 36
9 ~ 36
18 ~ 75
18 ~ 75
18 ~ 75
18 ~ 75
18 ~ 75
18 ~ 75
18 ~ 75
18 ~ 75
VDC
3.3
5
12
15
24
±5
±12
±15
3.3
5
12
15
24
±5
±12
±15
SDS(H)05-24S3P3W
SDS(H)05-24S05W
SDS(H)05-24S12W
SDS(H)05-24S15W
SDS(H)05-24S24W
SDS(H)05-24D05W
SDS(H)05-24D12W
SDS(H)05-24D15W
SDS(H)05-48S3P3W
SDS(H)05-48S05W
SDS(H)05-48S12W
SDS(H)05-48S15W
SDS(H)05-48S24W
SDS(H)05-48D05W
SDS(H)05-48D12W
SDS(H)05-48D15W
Output Current
@Full Load
mA
1000
1000
420
333
210
±500
±210
±168
1000
1000
420
333
210
±500
±210
±168
Input Current
@ No Load
mA
20
30
30
30
30
30
30
30
10
12
15
15
15
15
15
15
otherwise noted
Efficiency
%
76
80
83
83
83
80
83
84
76
81
83
83
83
80
83
84
Maximum
Capacitor Load
µF
4400
2200
1220
1000
470
±1000
±680
±440
4400
2200
1220
1000
470
±1000
±680
±440
PART NUMBER STRUCTURE
SDS05 - 48
Series Name
SDS: SMD type
SDH: DIP type
1
Input
Voltage
(VDC)
24: 9~36
48:18~75
S
Output
Quantity
05 W
Output
Voltage
(VDC)
S:Single 3P3:3.3
05:5
12:12
15:15
24:24
D: Dual
05:±5
12:±12
15:±15
Input
Range
4:1
H
Isolation
Option
: Standard type
1600VDC isolation
H: 3000VDC Isolation
www.PDUKE.com
2015/7/28
SDS05W
SDH05W
INPUT SPECIFICATIONS
Parameter
Conditions
Operating input voltage range
Start up time
Input surge voltage
24Vin(nom)
48Vin(nom)
Power up
Remote ON/OFF
24Vin(nom)
48Vin(nom)
24Vin(nom)
48Vin(nom)
Constant resistive load
1 second, max.
Input reflected ripple current(1)
Input filter
Remote ON/OFF
Ctrl pin applied current via 1kΩ
Application circuit
DC-DC ON
OUTPUT SPECIFICATIONS
Parameter
Voltage accuracy
Line regulation
Load regulation
Conditions
Low Line to High Line at Full Load
No Load to Full Load
Asymmetrical load 25%/100% FL
Measured by 20MHz bandwidth
Isolation voltage
Isolation resistance
Isolation capacitance
Single
Dual
Single
Dual
Dual
1 minute
Conditions
Standard
Suffix ”H”
500VDC
2
20
15
Unit
VDC
ms
VDC
mAp-p
Capacitor type
Open or high impedance
mA
2.0
3.0
4.0
2.5
mA
Min.
Typ.
-1.0
-0.2
-1.0
-1.0
-0.5
-0.8
-5.0
Max.
Unit
+1.0
+0.2
+1.0
+1.0
+0.5
+0.8
+5.0
%
%
Max.
Unit
%
%
mVp-p
-0.02
+0.02
%/
500
µs
Continuous, automatics recovery
Min.
Typ.
1600
3000
1
VDC
GΩ
50
50
100
MIL-HDBK-217F, Full load
ENVIRONMENTAL SPECIFICATIONS
Parameter
Operating ambient temperature
Storage temperature range
Thermal shock
Vibration
Relative humidity
Lead-free reflow solder process
Moisture sensitivity level(MSL)
36
75
10
10
50
100
Standard
Suffix ”H”
Switching frequency
Safety meets
Case material
Base material
Potting material
Weight
MTBF
Max.
24
48
5
5
75
25% load step change
GENERAL SPECIFICATIONS
Parameter
Typ.
9
18
DC-DC OFF
10% Load to 90% Load
Cross regulation
Ripple and noise
Temperature coefficient
Transient response recovery time
Short circuit protection
DC-DC ON
DC-DC OFF
Remote off input current
Min.
Conditions
With derating
www.PDUKE.com
Min.
-40
-55
pF
kHz
UL60950-1
EN60950-1
IEC60950-1
Non-conductive black plastic
Non-conductive black plastic
Silicone (UL94 V-0)
2.7g (0.10oz)
2.281 x 106 hrs
Typ.
Max.
Unit
+105
+125
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
IPC J-STD-020D
IPC J-STD-033B Level 2
2015/7/28
SDS05W
SDH05W
EMC SPECIFICATIONS
Parameter
EMI (1)
Conditions
Level
EN55022
ESD
EN61000-4-2
Radiated immunity
Fast transient (2)
Surge (2)
Conducted immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Class A, Class B
Air ± 8kV
Contact ± 6kV
10 V/m
± 2kV
± 1kV
10 Vr.m.s
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Note:
1.
2.
The standard modules meet EMI Class A or Class B and input reflected ripple current with external components. For further information, please
contact with P-DUKE
An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
SDS(H)05-48S05W
Derating Curve
SDS(H)05-48S05W
Efficiency vs. Input Voltage
SDS(H)05-48S05W
Efficiency vs. Output Current
MECHANICAL DRAWING
SDS05W: SMD TYPE
PIN CONNECTION
PIN
SINGLE
1
+Vin
2
-Vin
4
Ctrl
5
NC
6
-Vout
7
+Vout
DUAL
+Vin
-Vin
Ctrl
-Vout
Common
+Vout
1. All dimensions in inch (mm)
2. Tolerance :x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pin pitch tolerance ±0.01 (0.25)
4. Pin dimension tolerance ±0.004(0.1)
SDH05W: DIP TYPE
3
www.PDUKE.com
2015/7/28