NEC Express5800/R110g-1E System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. October 23, 2015 Revision 7.0 NEC Corporation SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Contents TECHNICAL SPECIFICATION ........................................................................................ 3 Key Features .......................................................................................................................................... 3 Specification .......................................................................................................................................... 3 EXTERNAL VIEWS ....................................................................................................... 10 Front and Rear Views ......................................................................................................................... 10 Dimensions (mm) ................................................................................................................................ 12 CONFIGURATION DIAGRAM ....................................................................................... 13 EXPANSION SLOTS ..................................................................................................... 14 SERVER CONFIGURATION ......................................................................................... 15 1 2 3 4 5 6 7 8 Base Models ................................................................................................................................. 15 Processor ..................................................................................................................................... 15 Memory ......................................................................................................................................... 16 Internal Hard Disk Drives ............................................................................................................ 17 4.1 RAID Configuration .............................................................................................................. 17 4.2 2.5-inch Drive Configuration ................................................................................................ 19 4.3 3.5-inch Drive Configuration ................................................................................................ 30 Optical Drive ................................................................................................................................. 33 PCI Card ........................................................................................................................................ 34 6.1 Network Interface Controller ................................................................................................ 34 6.2 InfiniBand ............................................................................................................................. 36 6.3 External Storage Controller ................................................................................................. 36 6.4 Serial Port Adapter .............................................................................................................. 37 Other Add-in Components .......................................................................................................... 38 7.1 Cooling Fan Kit .................................................................................................................... 38 7.2 Trusted Platform Module Kit ................................................................................................ 38 7.3 Internal Flash Memory ......................................................................................................... 38 7.4 Flash FDD............................................................................................................................ 38 Add-on Components ................................................................................................................... 39 8.1 17-inch LCD Console Drawer .............................................................................................. 39 8.2 KVM Switch ......................................................................................................................... 39 8.3 Server Management License............................................................................................... 40 8.4 Dust Proof Filter Kit ............................................................................................................. 40 REFERENCES............................................................................................................... 41 Server Management ............................................................................................................................ 41 OS Support Matrix for PCI Cards and Embedded Controllers ....................................................... 42 Supported PCI cards and Installable Slots....................................................................................... 43 Copyright Notice and Liability Disclaimer ........................................................................................ 44 REVISION HISTORY ..................................................................................................... 45 NEC Corporation Revision 7.0 – October 23, 2015 2 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Technical Specification Key Features High performance with the latest Intel® Xeon® processor E3-1200 v3 product family Up to 32 GB of high speed DDR3-1600 memory High energy efficiency with intelligent fan control, power capping feature and 80 PLUS® Platinum or Gold power supply Full manageability by integrated EXPRESSSCOPE Engine 3 Specification 2.5-inch Drive Model (1/2) Model R110g-1E Part Number Processor N8100-2182F, N8100-2183F Type Intel® Pentium® Processor G3240 Intel® Xeon® Processor E3-1220 v3 Intel® Xeon® Processor E3-1231 v3 Clock Speed 3.1 GHz 3.10 GHz 3.40 GHz Number of Processor 1 Cache 3 MB 8 MB Cores and Threads 2C / 2T 4C / 4T Chipset Memory Internal Storage Type DDR3-1600 ECC Unbuffered DIMM Standard Capacity 0 GB Maximum Capacity 32 GB (4 x 8 GB) Standard Capacity 0 GB Maximum Capacity SATA HDD: 8 TB (8 x 1 TB) SAS HDD : 9.6 TB (8 x 1.2 TB) SAS SSD 3.2 TB (8 x 400 GB) Disk Controller SATA : 6 Gb/s (Integrated) SAS : 6 Gb/s (Optional) RAID SATA : RAID 0/1/10 (Standard ), RAID 5/6/50/60 (Optional) SAS : RAID 0/1/5/6/10/50/60 (Optional) Hot Plug Supported Optical Disk Drive Optional Optical Drive Bays 1 Disk Drive Bays 4 1 Expansion Slots Video Interfaces NEC Corporation 4C / 8T Intel® C224 Chipset Total: 2 slots available 1 PCIe 3.0 x16 (x16 connector) 1 PCIe 2.0 x4 (x8 connector) Controller (VRAM) Integrated in Server Management Controller (32MB) Resolution / Color 1280 x 1024 / 16.7M 2 1 VGA (15-pin mini D-sub,1 rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear) 3 USB3.0 (1 front, 2 rear) 4 USB2.0 (1 front, 2 rear, 1 internal) Revision 7.0 – October 23, 2015 3 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Model R110g-1E Interfaces (Continued) 2 1000BASE-T LAN connector (RJ-45, 2 rear) 1 100BASE-TX LAN connector for management (RJ-45, 1 rear) Server Management EXPRESSSCOPE Engine 3 Redundant Fan Optional, non-hot plug Power Supply 1 400 Watt 80 PLUS® Platinum certified non-Hot plug PSU 2 500 Watt 80 PLUS® Gold certified Hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Power Consumption 1 2 3 4 5 (Max. Config, Idling) 127 VA / 118 Watt (Max. Config, Operating) 242 VA / 235 Watt 295 VA / 288 Watt Acoustic Noise Minimum Config. (Sound Pressure Maximum Config. 3 Level) Dimensions (W x D x H ) 35 dB 47 dB 44 dB 48 dB Weight (Minimum / Maximum) 10 kg / 17.5 kg, 22.05 lbs. / 38.58 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10° to 40 ° C / 50° to 104 ° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, UL, CB, RoHS, WEEE, BSMI, CCC, RCM Operating Systems and Virtualization Software Microsoft® Windows Server® 2008 x86 Standard Microsoft® Windows Server® 2008 x86 Enterprise Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 4 Red Hat Enterprise Linux 5.10 or later 4 Red Hat Enterprise Linux 5.10 or later (EM64T) 4 Red Hat Enterprise Linux 6.5 or later (x86) 4 Red Hat Enterprise Linux 6.5 or later (x86_64) 4 Red Hat Enterprise Linux 7.1 or later 5 VMware ESXi 5.1 Update 1 or later 5 VMware ESXi 5.5 Update 1 5 VMware ESXi 6.0 298 VA / 291 Watt 444.0 x 615.2 x 43.6 mm / 17.5 x 24.2 x 1.7 in (1U) Embedded SATA RAID controller is supported only on limited operating systems. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/en/global/prod/express/linux/index.html Supported on Xeon processor systems only. NEC Corporation Revision 7.0 – October 23, 2015 4 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E (2/2) Model R110g-1E Part Number Processor N8100-2182F, N8100-2183F Type Intel® Xeon® Intel® Xeon® Processor E3-1240L Processor E3-1275L v3 v3 Intel® Xeon® Processor E3-1271 v3 Clock Speed 2 GHz 3.60 GHz Number of Processor 1 Cache 8 MB Cores and Threads 4C / 8T Chipset Memory Internal Storage Intel® C224 Chipset Type DDR3-1600 ECC Unbuffered DIMM Standard Capacity 0 GB Maximum Capacity 32 GB (4 x 8 GB) Standard Capacity 0 GB Maximum Capacity SATA HDD: 8 TB (8 x 1 TB) SAS HDD : 9.6 TB (8 x 1.2 TB) SAS SSD 3.2 TB (8 x 400 GB) Disk Controller SATA : 6 Gb/s (Integrated) SAS : 6 Gb/s (Optional) RAID SATA : RAID 0/1/10 (Standard ), RAID 5/6/50/60 (Optional) SAS : RAID 0/1/5/6/10/50/60 (Optional) Hot Plug Supported Optical Disk Drive Optional Optical Drive Bays 1 Disk Drive Bays 4 1 Expansion Slots Video 2.70 GHz Total: 2 slots available 1 PCIe 3.0 x16 (x16 connector) 1 PCIe 2.0 x4 (x8 connector) Controller (VRAM) Integrated in Server Management Controller (32MB) Resolution / Color 1280 x 1024 / 16.7M 2 Interfaces 1 VGA (15-pin mini D-sub,1 rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear) 3 USB3.0 (1 front, 2 rear) 4 USB2.0 (1 front, 2 rear, 1 internal) 2 1000BASE-T LAN connector (RJ-45, 2 rear) 1 100BASE-TX LAN connector for management (RJ-45, 1 rear) Server Management EXPRESSSCOPE Engine 3 Redundant Fan Optional, non-hot plug Power Supply 1 400 Watt 80 PLUS® Platinum certified non-Hot plug PSU 2 500 Watt 80 PLUS® Gold certified Hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Power Consumption (Max. Config, Idling) 119 VA / 110 Watt 127 VA /118 Watt (Max. Config, Operating) 235 VA / 227 Watt 262 VA / 256 Watt Acoustic Noise Minimum Config. (Sound Pressure Maximum Config. 3 Level) Dimensions (W x D x H ) NEC Corporation 300 VA / 293 Watt 42 dB 47 dB 44 dB 48 dB 444.0 x 615.2 x 43.6 mm / 17.5 x 24.2 x 1.7 in (1U) Revision 7.0 – October 23, 2015 5 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 1 2 3 4 Model R110g-1E Weight (Minimum / Maximum) 10 kg / 17.5 kg, 22.05 lbs. / 38.58 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10° to 40 ° C / 50° to 104 ° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, UL, CB, RoHS, WEEE, BSMI, CCC, RCM Operating Systems and Virtualization Software Microsoft® Windows Server® 2008 x86 Standard Microsoft® Windows Server® 2008 x86 Enterprise Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 4 Red Hat Enterprise Linux 5.10 or later 4 Red Hat Enterprise Linux 5.10 or later (EM64T) 4 Red Hat Enterprise Linux 6.5 or later (x86) 4 Red Hat Enterprise Linux 6.5 or later (x86_64) 4 Red Hat Enterprise Linux 7.1 or later VMware ESXi 5.1 Update 1 or later VMware ESXi 5.5 Update 1 VMware ESXi 6 Embedded SATA RAID controller is supported only on limited operating systems. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/en/global/prod/express/linux/index.html 3.5-inch Drive Model (1/2) Model R110g-1E Part Number Processor N8100-2180F, N8100-2181F Type Intel® Pentium® Processor G3240 Intel® Xeon® Processor E3-1220 v3 Intel® Xeon® Processor E3-1231 v3 Clock Speed 3.1 GHz 3.10 GHz 3.40 GHz Number of Processor 1 Cache 3 MB 8 MB Cores and Threads 2C / 2T 4C / 4T Chipset Memory Internal Storage NEC Corporation 4C / 8T Intel® C224 Chipset Type DDR3-1600 ECC Unbuffered DIMM Standard Capacity 0 GB Maximum Capacity 32 GB (4 x 8 GB) Standard Capacity 0 GB Maximum Capacity SATA : 16 TB (4 x 4 TB) Disk Controller SATA : 6Gb/s (Integrated) RAID SATA : RAID 0/1/10 (Standard ), RAID 5/6 (Optional) Hot Plug Supported 1 Revision 7.0 – October 23, 2015 6 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Model R110g-1E Internal Storage Optical Disk Drive Optional (Continued) Optical Drive Bays 1 Disk Drive Bays 4 Expansion Slots Video Total: 2 slots available 1 PCIe 3.0 x16 (x16 connector) 1 PCIe 2.0 x4 (x8 connector) Controller (VRAM) Integrated in Server Management Controller (32MB) Resolution / Color 1280 x 1024 / 16.7M 2 Interfaces 1 VGA (15-pin mini D-sub,1 rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear) 3 USB3.0 (1 front, 2 rear) 4 USB2.0 (1 front, 2 rear, 1 internal) 2 1000BASE-T LAN connector (RJ-45, 2 rear) 1 100BASE-TX LAN connector for management (RJ-45, 1 rear) Server Management EXPRESSSCOPE Engine 3 Redundant Fan Optional, non-hot plug Power Supply 1 400 Watt 80 PLUS® Platinum certified non-Hot plug PSU 2 500 Watt 80 PLUS® Gold certified Hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Power Consumption (Max. Config, Idling) 102 VA / 94 Watt 112 VA / 104 Watt (Max. Config, Operating) 214 VA /207 Watt 277 VA / 270 Watt Acoustic Noise Minimum Config. (Sound Pressure Maximum Config. 3 Level) Dimensions (W x D x H ) 35 dB 47 dB 44 dB 48 dB Weight (Minimum / Maximum) 10 kg / 17.5 kg, 22.05 lbs. / 38.58 lbs. Temperature, Relative Humidity (non-condensing) Operating: 10° to 40 ° C / 50° to 104 ° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, UL, CB, RoHS, WEEE, BSMI, CCC, RCM Operating Systems and Virtualization Software Microsoft® Windows Server® 2008 x86 Standard Microsoft® Windows Server® 2008 x86 Enterprise Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 4 Red Hat Enterprise Linux 5.10 or later 4 Red Hat Enterprise Linux 5.10 or later (EM64T) 4 Red Hat Enterprise Linux 6.5 or later (x86) 4 Red Hat Enterprise Linux 6.5 or later (x86_64) 4 Red Hat Enterprise Linux 7.1 or later 5 VMware ESXi 5.1 Update 1 or later 5 VMware ESXi 5.5 Update 1 5 VMware ESXi 6.0 1 2 3 4 289 VA / 282 Watt 444.0 x 615.2 x 43.6 mm / 17.5 x 24.2 x 1.7 in (1U) Embedded SATA RAID controller is supported only on limited operating systems. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: NEC Corporation Revision 7.0 – October 23, 2015 7 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 5 http://www.nec.com/en/global/prod/express/linux/index.html Supported on Xeon processor systems only. (2/2) Model R110g-1E Part Number N8100-2180F, N8100-2181F Processor Type Intel® Xeon® Intel® Xeon® Processor E3-1240L Processor E3-1275L v3 v3 Intel® Xeon® Processor E3-1271 v3 Clock Speed 2 GHz 3.60 GHz Number of Processor 1 Cache 8 MB Cores and Threads 4C / 8T Chipset Memory Internal Storage Intel® C224 Chipset Type DDR3-1600 ECC Unbuffered DIMM Standard Capacity 0 GB Maximum Capacity 32 GB (4 x 8 GB) Standard Capacity 0 GB Maximum Capacity SATA : 16 TB (4 x 4 TB) Disk Controller SATA : 6Gb/s (Integrated) RAID SATA : RAID 0/1/10 (Standard ), RAID 5/6 (Optional) Hot Plug Supported Optical Disk Drive Optional Optical Drive Bays 1 Disk Drive Bays 4 1 Expansion Slots Video 2.70 GHz Total: 2 slots available 1 PCIe 3.0 x16 (x16 connector) 1 PCIe 2.0 x4 (x8 connector) Controller (VRAM) Integrated in Server Management Controller (32MB) Resolution / Color 1280 x 1024 / 16.7M 2 Interfaces 1 VGA (15-pin mini D-sub,1 rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2 rear) 3 USB3.0 (1 front, 2 rear) 4 USB2.0 (1 front, 2 rear, 1 internal) 2 1000BASE-T LAN connector (RJ-45, 2 rear) 1 100BASE-TX LAN connector for management (RJ-45, 1 rear) Server Management EXPRESSSCOPE Engine 3 Redundant Fan Optional, non-hot plug Power Supply 1 400 Watt 80 PLUS® Platinum certified non-Hot plug PSU 2 500 Watt 80 PLUS® Gold certified Hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Power Consumption (Max. Config, Idling) 102 VA / 94 Watt (Max. Config, Operating) 206 VA / 197 Watt 117 VA / 108 Watt 235 VA / 227 Watt 295 VA / 287 Watt Acoustic Noise Minimum Config. (Sound Pressure Maximum Config. 3 Level) Dimensions (W x D x H ) 42 dB 47 dB 44 dB 48 dB Weight (Minimum / Maximum) 10 kg / 17.5 kg, 22.05 lbs. / 38.58 lbs. NEC Corporation 444.0 x 615.2 x 43.6 mm / 17.5 x 24.2 x 1.7 in (1U) Revision 7.0 – October 23, 2015 8 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Model R110g-1E Temperature, Relative Humidity (non-condensing) Operating: 10° to 40 ° C / 50° to 104 ° F, 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% Regulatory and Safety FCC, CE, UL, CB, RoHS, WEEE, BSMI, CCC, RCM Operating Systems and Virtualization Software Microsoft® Windows Server® 2008 x86 Standard Microsoft® Windows Server® 2008 x86 Enterprise Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 4 Red Hat Enterprise Linux 5.10 or later 4 Red Hat Enterprise Linux 5.10 or later (EM64T) 4 Red Hat Enterprise Linux 6.5 or later (x86) 4 Red Hat Enterprise Linux 6.5 or later (x86_64) 4 Red Hat Enterprise Linux 7.1 or later VMware ESXi 5.1 Update 1 or later VMware ESXi 5.5 Update 1 VMware ESXi 6.0 1 2 3 4 Embedded SATA RAID controller is supported only on limited operating systems. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/en/global/prod/express/linux/index.html NEC Corporation Revision 7.0 – October 23, 2015 9 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E External Views Front and Rear Views Front View for 2.5-inch Drive Model C D E GI K M N F H J L O A P B Front View for 3.5-inch Drive Model C D E GI K M N B F H J L O A Legend A. Drive Bays I. UID LED B. Optical Drive Bay J. System Status LED C. USB 2.0 Connector K. BMC Reset Switch D. USB 3.0 Connector L. Dump (NMI) Switch E. Power LED M. UID LED Button F. Drive Activity LED N. Power Button G. Data LAN 1 Activity LED O. Pull-out Tab H. Data LAN 2 Activity LED P. Optional Drive Cage Bay NEC Corporation Revision 7.0 – October 23, 2015 10 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Rear View for Non-redundant PSU Configuration L J M K I C D F G A B E H Rear View for Redundant PSU Configuration L L M M J K I C D F G A B E H Legend A. PCI Slot (Low profile) B. H. UID LED / Button PCI Slot (Low profile) I. Power LED C. Data LAN 1 Connector J. Serial Port Connector D. Data LAN 2 Connector K. VGA Connector E. Management LAN Connector L. Power Unit F. USB 2.0 Connectors M. AC Inlet G. USB 3.0 Connectors NEC Corporation Revision 7.0 – October 23, 2015 11 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Dimensions (mm) NEC Corporation Revision 7.0 – October 23, 2015 12 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Configuration Diagram 2.5-inch Drive Model Legend: Mandatory Components Standard Components Mandatory Components Standard Components 3.5-inch Drive Model Legend: NEC Corporation Revision 7.0 – October 23, 2015 13 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Expansion Slots PCI 1A PCI 1B Legend #1A PCIe 3.0 x8, x16 connector, Low profile, up to 173 mm length #1B PCIe 2.0 x4, x8 connector, Low profile, up to 173 mm length NEC Corporation Revision 7.0 – October 23, 2015 14 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Server Configuration 1 Base Models Product Name / Description Part Number NEC Express5800/R110g-1E No CPU, no RAM, no 3.5-inch HDD, no Cooling FAN Including: 3.5-inch Drive Cage, 400 Watt non-hot plug power supply, Front bezel, EXPRESSBUILDER DVD NEC Express5800/R110g-1E No CPU, no RAM, no 3.5-inch HDD, no Cooling FAN Including: 3.5-inch Drive Cage, 2 x 500 Watt hot plug power supply, Front bezel, EXPRESSBUILDER DVD NEC Express5800/R110g-1E No CPU, no RAM, no 2.5-inch HDD, no Cooling FAN Including: 2.5-inch Drive Cage, 400 Watt non-hot plug power supply, Front bezel, EXPRESSBUILDER DVD NEC Express5800/R110g-1E No CPU, no RAM, no 2.5-inch HDD, no Cooling FAN Including: 2.5-inch Drive Cage, 2 x 500 Watt hot plug power supply, Front bezel, EXPRESSBUILDER DVD N8100-2180F N8100-2181F N8100-2182F N8100-2183F NOTE: The base model must be ordered with a processor kit, a memory kit, a cooling fan kit, and internal hard drive cable. 2 Processor Available sockets: 1 Category Product Name / Description Part Number Processors Required Pentium G3240 Processor Kit Intel® Pentium ® Processor G3240 (3.10 GHz, 2C/2T, 3 MB) Xeon E3-1220 v3 Processor Kit Intel® Xeon ® Processor E3-1220 v3 (3.10 GHz, 4C/4T, 8 MB) Xeon E3-1240L v3 Processor Kit Intel® Xeon ® Processor E3-1240L v3 (2GHz, 4C/8T, 8 MB) Xeon E3-1231 v3 Processor Kit Intel® Xeon ® Processor E3-1231 v3 (3.40 GHz, 4C/8T, 8 MB) Xeon E3-1275L v3 Processor Kit Intel® Xeon ® Processor E3-1275L v3 (2.70 GHz, 4C/8T, 8 MB) Xeon E3-1271 v3 Processor Kit Intel® Xeon ® Processor E3-1271 v3 (3.60 GHz, 4C/8T, 8 MB) N8101-738F N8101-626F N8101-740F N8101-741F N8101-742F N8101-743F NOTE: The processor kit must be ordered with the base model. VMware ESXi is not supported on Pentium processor systems. NEC Corporation Revision 7.0 – October 23, 2015 15 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 3 Memory Available slots: 4 Product Name / Description Part Number 4GB DDR3-1600 UNB Memory Kit 4GB Unbuffered ECC DIMM, DDR3L-1600(PC3-12800) 8GB DDR3-1600 UNB Memory Kit 8GB Unbuffered ECC DIMM, DDR3L-1600(PC3-12800) N8102-524F N8102-525F NOTE: Minimum one memory kit must be installed. To install by double of memory kit is recommended in order to increase memory transfer speed by the dual-channel symmetric configuration. Actual memory speed drops to 1333 MHz when you choose Pentium Processor. The memory requirement to run VMware ESXi™ are below: - VMware ESXi 5.1 : at least 3 GB - VMware ESXi 5.5 : at least 5 GB - VMware ESXi 6.0 : at least 5 GB Maximum Available Memory See the table below for the maximum memory size that you can actually use on your system. The maximum available memory is less than the maximum physical memory supported by your system because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary depending on the type and the number of PCI cards you are using. Maximum Memory Size Supported by Operating Systems 4 GB 4 GB( HW-DEP enabled) App. 3.5 GB (HW-DEP disabled) 32 GB 32 GB 64 GB 32 GB 2 TB 32 GB Microsoft Windows Server 2012 Standard 1 Microsoft Windows Server 2012 Datacenter 1 Microsoft Windows Server 2012 R2 Standard 1 Microsoft Windows Server 2012 R2 Datacenter 4 TB 32 GB Red Hat Enterprise Linux 5 Red Hat Enterprise Linux 6 16 GB 16 GB Red Hat Enterprise Linux 5 (EM64T) 1 TB 32 GB Red Hat Enterprise Linux 6 (x86_64) Red Hat Enterprise Linux 7 6 TB 32 GB VMware ESXi 5.1 2 2 TB 32 GB VMware ESXi 5.5 2 4 TB 32 GB VMware ESXi 6.0 3 6 TB 32 GB Microsoft Windows Server 2008 Standard Microsoft Windows Server 2008 R2 Standard 1 Microsoft Windows Server 2008 Enterprise Microsoft Windows Server 2008 R2 Enterprise 1 1 1 Maximum Available Memory The maximum available memory size of Hyper-V systems are below: - Windows Server 2008 R2 Standard : 32 GB - Windows Server 2008 R2 Enterprise : 1TB - Windows Server 2012, Windows Server 2012 R2 : 4 TB 2 3 Up to 1TB of main memory is available to each virtual machine. Up to 4TB of main memory is available to each virtual machine. NEC Corporation Revision 7.0 – October 23, 2015 16 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4 Internal Hard Disk Drives 4.1 RAID Configuration Refer to the section in accordance with your disk form factor and RAID configuration. 4.1.1 Up to six 2.5-inch Drive Available Interface Non-RAID Refer to 4.2.1 SATA Refer to 4.2.2 SATA No Cache Refer to 4.2.3 SAS, SATA 512 MB Cache Refer to 4.2.4 SAS, SATA 512 MB Cache Refer to 4.2.5 SAS, SATA 1GB Cache/ Battery Refer to 4.2.6 SAS, SATA 1GB Cache/ CacheCade Refer to 4.2.7 SAS, SATA Embedded SATA RAID Controller RAID 0/1/10 Optional RAID Controller RAID 5/6/50 4.1.2 Up to eight 2.5-inch Drive Available Interface RAID 0/1/10 RAID 5/6/50/60 No Cache Refer to 4.2.8 SAS, SATA 512 MB Cache Refer to 4.2.9 SAS, SATA 512 MB Cache Refer to 4.2.10 SAS, SATA 1GB Cache/ Battery Refer to 4.2.11 SAS, SATA 1GB Cache/ CacheCade Refer to 4.2.12 SAS, SATA NOTE: Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI Cards and Embedded Controllers. Hot plug insertion/removal is not supported with the Embedded SATA non-RAID controller. Internal optical drive cannot be installed when N8154-52F 2.5-inch Hot Plug Drive Cage Kit is installed. To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process. All drives within a RAID array should be of the same type, capacity and rotation speed. All SAS hard drives within a system should be of the same rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs can be mixed. NEC Corporation Revision 7.0 – October 23, 2015 17 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.1.3 3.5-inch Drive Available Interface Non-RAID Refer to 4.3.1 SATA Refer to 4.3.2 SATA No Cache Refer to 4.3.3 SATA 512 MB Cache Refer to 4.3.4 SATA 512 MB Cache Refer to 4.3.5 SATA 1GB Cache/ Battery Refer to 4.3.6 SATA 1GB Cache/ CacheVault Refer to 4.3.7 SATA Embedded SATA RAID Controller RAID 0/1/10 Optional RAID Controller RAID 5/6 NOTE: Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI Cards and Embedded Controllers. Hot plug insertion/removal is not supported with the Embedded SATA non-RAID controller. All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 7.0 – October 23, 2015 18 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2 2.5-inch Drive Configuration 4.2.1 Up to four Drives with Embedded SATA non-RAID Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller 4x 6Gb/s SATA Internal SAS/SATA Cable MiniSAS-4x Single SATA 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm (Standard) Cable Required Drive Cage Drive 4 slots available SATA HDD K410-289(00) (Standard) N8150-452 N8150-453 N8150-454 NOTE: Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller. 4.2.2 Up to four Drives with Embedded SATA RAID Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller 4x 6Gb/s SATA, RAID 0/1/10 capable Internal SATA Cable miniSAS to 4x Single-SATA 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm (Standard) Cable Drive Cage Drive 4 slots available SATA K410-289(00) (Standard) N8150-452 N8150-453 N8150-454 NOTE Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI Cards and Embedded Controllers. All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 7.0 – October 23, 2015 19 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.3 Up to six Drives with RAID 0/1 Controller without Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (0MB, RAID 0/1) LSI MegaRAID SAS 9240-8i RAID0/1/10, Cache less, Int. 8, PCIe 2.0(x8), SAS 6Gb/s, SATA 6Gb/s Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA, for 5th and 6th hard drives 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm N8103-171 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm N8150-445 Cable Required Cable Drive Cage Drive 4 to 6 slots available SAS HDD SATA HDD K410-240(00) K410-204(00) (Standard) N8150-444 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 20 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.4 Up to six Drives with RAID 0/1 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID 0/1) LSI MegaRAID SAS 9272-8i RAID0/1/10, 512MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA, for 5th and 6th hard drives 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s N8103-172 RAID BBU Recommended Cable Required Cable Drive Cage Drive 4 to 6 slots available SAS HDD SATA HDD SAS SSD N8103-154 K410-240(00) K410-204(00) (Standard) N8150-444 N8150-445 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 21 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.5 Up to six Drives with RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID 0/1/5/6) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA, for 5th and 6th hard drives 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm N8103-173 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s N8150-445 RAID BBU Recommended Cable Required Cable Drive Cage Drive 4 to 6 slots available SAS HDD SATA HDD SAS SSD N8103-154 K410-240(00) K410-204(00) (Standard) N8150-444 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 22 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.6 Up to six Drives with RAID 5/6 Controller with 1 GB Cache/Battery Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i MegaRAID CacheCade for LSI MegaRAID SAS NOTE: - SSD used for cache is required - The SSD capacity which can be used as read cache is up to 512 GB. N8103-174 Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA, for 5th and 6th hard drives 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s K410-240(00) RAID BBU Recommended SSD Caching Recommended Cable Required Cable Drive Cage Drive 4 to 6 slots available SAS HDD SATA HDD SAS SSD N8103-154 N8103-156 K410-204(00) (Standard) N8150-444 N8150-445 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 23 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.7 Up to six Drives with RAID 5/6 Controller with 1 GB Cache/CacheVault Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9270CV-8i(with CV) RAID0/1/5/6/10/50/60, 1GB Cache, Int. 8ports, PCIe 3.0(x8), 6Gb/s, flash cache protection modules included MegaRAID CacheCade for LSI MegaRAID SAS NOTE: - SSD used for cache is required - The SSD capacity which can be used as read cache is up to 512 GB. N8103-168 Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA, for 5th and 6th hard drives 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s K410-240(00) SSD Caching Recommended Cable Required Cable Drive Cage Drive 4 to 6 slots available SAS HDD SATA HDD SAS SSD N8103-156 K410-204(00) (Standard) N8150-444 N8150-445 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 24 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.8 Up to eight Drives with RAID 0/1 Controller without Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (0MB, RAID 0/1) LSI MegaRAID SAS 9240-8i RAID 0/1/10, Cache less, Int. 8, PCIe 2.0(x8), SAS 6Gb/s, SATA 6Gb/s Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage Kit 2 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm N8103-171 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm N8150-445 Cable Required Cable Required Drive Cage Drive Cage Required Drive 8 slots available SAS HDD SATA HDD K410-240(00) K410-204(00) (Standard) N8154-52F N8150-444 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 25 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.9 Up to eight Drives with RAID 0/1 Controller with 512 GB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID 0/1) LSI MegaRAID SAS 9272-8i RAID 0/1/10, 512MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9267-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA, for 5th and 6th hard drives 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage Kit 2 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s N8103-172 RAID BBU Recommended Cable Required Cable Required Drive Cage Drive Cage Required Drive 8 slots available SAS HDD SATA HDD SAS SSD N8103-154 K410-240(00) K410-204(00) (Standard) N8154-52F N8150-444 N8150-445 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 26 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.10 Up to eight Drives with RAID 5/6 Controller with 512 GB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID 0/1/5/6) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage Kit 2 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm N8103-173 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s N8150-445 RAID BBU Recommended Cable Required Cable Required Drive Cage Drive Cage Required Drive 8 slots available SAS HDD SATA HDD SAS SSD N8103-154 K410-240(00) K410-204(00) (Standard) N8154-52F N8150-444 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 27 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.11 Up to eight Drives with RAID 5/6 Controller with 1 GB Cache/Battery Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i MegaRAID CacheCade for LSI MegaRAID SAS NOTE: - SSD used for cache is required - The SSD capacity which can be used as read cache is up to 512 GB. N8103-174 Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage Kit 2 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s K410-240(00) RAID BBU Recommended SSD Caching Recommended Cable Required Cable Required Drive Cage Drive Cage Required Drive 8 slots available SAS HDD SATA HDD SAS SSD N8103-154 N8103-156 K410-204(00) (Standard) N8154-52F N8150-444 N8150-445 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 28 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.2.12 Up to eight Drives with RAID 5/6 Controller with 1 GB Cache/CacheVault Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9270CV-8i(with CV) RAID0/1/5/6/10/50/60, 1GB Cache, Int. 8ports, PCIe 3.0(x8), 6Gb/s, flash cache protection modules included MegaRAID CacheCade for LSI MegaRAID SAS NOTE: - SSD used for cache is required - The SSD capacity which can be used as read cache is up to 512 GB. N8103-168 Internal SAS Cable 1x Mini-SAS to 4x Single SATA Internal SAS Cable 1x Mini-SAS to 4x Single SATA 2.5-inch Drive Cage 6 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage Kit 2 x 2.5-inch hot plug drive bays 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm 146.5GB 15K Hot Plug 2.5-inch SAS HDD 1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm 250GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm 200GB Hot Plug 2.5-inch SAS SSD 1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s 400GB Hot Plug 2.5-inch SAS SSD 1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s K410-240(00) SSD Caching Recommended Cable Required Cable Required Drive Cage Drive Cage Required Drive 8 slots available SAS HDD SATA HDD SAS SSD N8103-156 K410-204(00) (Standard) N8154-52F N8150-444 N8150-445 N8150-446 N8150-447 N8150-448 N8150-449 N8150-450 N8150-451 N8150-522 N8150-452 N8150-453 N8150-454 N8150-711 N8150-712 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. NEC Corporation Revision 7.0 – October 23, 2015 29 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.3 3.5-inch Drive Configuration 4.3.1 Embedded SATA non-RAID Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller MiniSAS, 6Gb/s SATA Internal SAS/SATA Cable MiniSAS to 4x Single-SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm (Standard) Cable Required Drive Cage Drive 4 slots available K410-288(00) (Standard) N8150-455 N8150-456 N8150-457 NOTE Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller. 4.3.2 Embedded SATA RAID Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller 4x 6Gb/s SATA, 6Gb/s SATA Internal SAS/SATA Cable (Standard) Cable Required Drive Cage Drive 4 slots available K410-288(00) MiniSAS to 4x Single-SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 3TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 4TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm (Standard) N8150-455 N8150-456 N8150-457 N8150-458 N8150-459 NOTE: Embedded SATA RAID controller is supported only on limited OS. For more details, please see OS Support Matrix for PCI Cards and Embedded Controllers. Embedded SATA RAID Controller does not support RAID 10 configured with 2TB or more HDDs. All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 7.0 – October 23, 2015 30 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.3.3 RAID 0/1 Controller with 0 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (0MB, RAID 0/1) LSI MegaRAID SAS 9240-8i RAID0/1/10, Cache less, Int. 8, PCIe 2.0(x8), SAS 6Gb/s, SATA 6Gb/s Internal SAS Cable 1x Mini-SAS to 4x Single SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm N8103-171 Cable Required Drive Cage Drive 4 slots available K410-240(00) (Standard) N8150-455 N8150-456 N8150-457 NOTE: All hard drives within a RAID array should be of the same capacity. 4.3.4 RAID 0/1 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID 0/1) LSI MegaRAID SAS 9272-8i RAID 0/1, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 3TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 4TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm N8103-172 RAID BBU Recommended Cable Required Drive Cage Drive 4 slots available N8103-154 K410-240(00) (Standard) N8150-455 N8150-456 N8150-457 N8150-458 N8150-459 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 7.0 – October 23, 2015 31 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.3.5 RAID 5/6 Controller with 512 MB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (512MB, RAID 0/1) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 3TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 4TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm N8103-173 RAID BBU Recommended Cable Required Drive Cage Drive 4 slots available N8103-154 K410-240(00) (Standard) N8150-455 N8150-456 N8150-457 N8150-458 N8150-459 NOTE: All hard drives within a RAID array should be of the same capacity. 4.3.6 RAID 5/6 Controller with 1 GB Cache/Battery Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9272-8i RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0(x8), SAS 6Gb/s, SATA 6Gb/s RAID Battery Backup Unit for LSI MegaRAID SAS 9272-8i Internal SAS Cable 1x Mini-SAS to 4x Single SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 3TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 4TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm N8103-174 RAID BBU Recommended Cable Required Drive Cage Drive 4 slots available N8103-154 K410-240(00) (Standard) N8150-455 N8150-456 N8150-457 N8150-458 N8150-459 NOTE: All hard drives within a RAID array should be of the same capacity. NEC Corporation Revision 7.0 – October 23, 2015 32 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 4.3.7 RAID 5/6 Controller with 1 GB Cache/CacheVault Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9270CV-8i(with CV) RAID0/1/5/6/10/50/60, 1GB Cache, Int. 8ports, PCIe 3.0(x8), 6Gb/s, flash cache protection modules included Internal SAS Cable 1x Mini-SAS to 4x Single SATA 3.5-inch Drive Cage 4 x 3.5-inch hot plug drive bays 500GB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 1TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 2TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 3TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm 4TB 7.2K Hot Plug 3.5-inch SATA HDD 1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm N8103-168 Cable Required Drive Cage Drive 4 slots available K410-240(00) (Standard) N8150-455 N8150-456 N8150-457 N8150-458 N8150-459 NOTE: All hard drives within a RAID array should be of the same capacity. 5 Optical Drive Category Product Name / Description Part Number Internal 1 slot available Internal Slim DVD-ROM drive Slim DVD-ROM drive Internal DVD Super Multi Drive Slim DVD Super Multi drive, not including writing software External DVD Super MULTI Drive USB, Slim DVD Super Multi drive, not including writing software N8151-122 External N8151-107F N8160-97F NOTE: Up to 1 optical drive can be connected. When N8160-97F is connected to a front side USB port, do not connect any other USB device to the other USB port on the front side. N8154-52F 2.5-inch Hot Plug Drive Cage Kit cannot be installed when an internal optical drive is installed. NEC Corporation Revision 7.0 – October 23, 2015 33 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 6 PCI Card Please refer to Supported PCI cards and Installable Slots with regard to the position of PCI slot which can mount PCI card supported. 6.1 Network Interface Controller Category Adapter GbE 10GbE SFP+ Module Product Name / Description Part Number 1000BASE-T Adapter Broadcom ® BCM5718 Gigabit Ethernet Controller PCIe 2.0 x1 Dual Port 1000BASE-T Adapter Broadcom ® BCM5718 Gigabit Ethernet Controller PCIe 2.0 x1 Dual Port 1000BASE-T Adapter Intel® 82580 Gigabit Ethernet Controller PCIe 2.0 x4 Quad Port 1000BASE-T Adapter Broadcom ® BCM5719 Gigabit Ethernet Controller PCIe 2.0 x4 NOTE: - Network cables with RJ-45 plug covers cannot be used. N8104-138 10GBASE Adapter (SFP+/2ch) Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port Network Interface Card PCIe 2.0 x8 NOTE: - N8104-129 SFP+ Module is required to connect with an optical cable. - Up to 2 SFP+ Modules can be installed. - One network adapter can be installed on RHEL 6 operating systems. Dual Port 10GBASE-T Adapter Intel X540-BT2 PCIe 2.0 x8 SFP+ Module (10G-SR) 1 x SFP+ Module for N8104-128 N8104-128 N8104-132 N8104-145 N8104-133 N8104-153 N8104-129 NOTE: When using ESXi 6.0, mix configuration of N8104-133 and N8104-128/153 is not supported. NEC Corporation Revision 7.0 – October 23, 2015 34 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E NIC Teaming feature - NIC Teaming and bonding features See the table below for supported network interfaces and OS combinations. Windows Server 2008 support BASP (Broadcom Advanced Server Program) or Intel PROSet teaming while Windows Server 2012 or later and Linux support teaming with bonding function supported by OS. Network Interface Team Operating Systems 1GbE NIC Embedded 1GbE NIC/N8104-138/-132/-133 Up to four teams per one system Up to four ports per one team Windows Server 2008 Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 RHEL5.10* or later RHEL6.5* or later RHEL7.1* or later 1GbE NIC N8104-145 Up to four teams per one system Up to four ports per one team Windows Server 2008 R2 10GbE NIC N8104-128 Up to two teams per one system Up to two ports per one team Windows Server 2008 Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 RHEL5.10(EM64T)* or later RHEL6.5(x86_64)* or later RHEL7.1* or later 10GbE NIC N8104-153 Up to one team per one system Up to two ports per one team Windows Server 2012 Windows Server 2012 R2 RHEL6.5* or later RHEL7.1* or later * RHEL : Red Hat Enterprise Linux NOTE: Teaming feature is not supported on iSCSI interfaces. The network interfaces for teaming must be the same. When 10GbE and 1GbE LAN teams are mixed, the teams must be up to four per one system. Using iSCSI See the table below for supported network interfaces and OS combinations. Category Network Interface Operating Systems 1GbE Embedded 1GbE NIC Windows Server 2008 R2, Windows Server 2012, Windows Server 2012R2, Red Hat Enterprise Linux, VMware N8104-138 Windows Server 2008 R2, Windows Server 2012, Windows Server 2012R2, Red Hat Enterprise Linux, VMware N8104-132 Windows Server 2008 R2, Windows Server 2012, Windows Server 2012R2, Red Hat Enterprise Linux, VMware N8104-133 Windows Server 2008 R2, Windows Server 2012, Windows Server 2012R2, Red Hat Enterprise Linux, VMware N8104-128 Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012R2, Red Hat Enterprise Linux, VMware N8104-153 Windows Server 2012, Windows Server 2012 R2, Red Hat Enterprise Linux 6.5(x86_64) or later, Red Hat Enterprise Linux 7.1 or later, VMware ESXi 5.1 Update 2 Patch 05 or later, VMware ESXi 5.5 Update2 or lator 10GbE NOTE: NIC Teaming feature is not supported on iSCSI interfaces. NEC Corporation Revision 7.0 – October 23, 2015 35 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 6.2 InfiniBand Category Product Name / Description Part Number Controller Single Port InfiniBand Adapter Mellanox ConnectX-3 VPI, MCX353A-FCBT, FDR, PCIe 3.0(x8) Dual Port InfiniBand Adapter Mellanox ConnectX-3 VPI, MCX354A-FCBT, FDR, PCIe 3.0(x8) InfiniBand Cable 2m/FRD Copper InfiniBand Cable 3m/FDR Copper InfiniBand Switch 36 ports/FDR Mellanox MSX6036F-1SFR 36 ports, FDR, One power supply module included, no power cord Redundant Power Supply Unit Power supply module for 36 ports InfiniBand switch, no power cord N8104-146 Cable Switch Unit Power Supply N8104-147 K410-304(02) K410-304(03) NE3707-061 NE3707-063 NOTE: The InfiniBand adapters and other options are make-to-order products. Please consult our sales representative in regards to production lead time. 6.3 External Storage Controller 6.3.1 RAID Controller Category Product Name / Description Part Number Controller RAID Controller (1GB, RAID0/1/5/6) LSI MegaRAID SAS 9286CV-8e RAID0/1/5/6/10/50/60, 1GB, Ext. 8, PCIe 3.0 x8, SAS 6Gb/s, SATA 6Gb/s, flash cache protection modules included N8103-161 NOTE: To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process. It is recommended to set RAID array configuration drives less than eight in order to minimize the risk of becoming multiple hard drives failure. NEC Corporation Revision 7.0 – October 23, 2015 36 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 6.3.2 Fibre Channel / SAS Controller Category Product Name / Description Part Number Fibre Channel Fibre Channel Controller (1ch) Emulex LightPulse LPe1250-F8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0 x8 Fibre Channel Controller (2ch) Emulex LightPulse LPe12002-M8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0 x8 Fibre Channel Controller (1ch) Emulex LightPulse LPe16000B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0 x8 NOTE: - One controller can be installed on Pentium processor systems. Fibre Channel Controller (2ch) Emulex LightPulse LPe16002B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0 x8 NOTE: - The controller is supported only with Xeon processor. N8190-153 SAS Controller LSI SAS9212-4i4e Host Bus Adapter 6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8 N8103-142 SAS 6.4 N8190-154 N8190-157 N8190-158A Serial Port Adapter Product Name / Description Part Number Serial port adapter Serial port fixed to PCI bracket N8117-01A NOTE: Up to one Serial Port Adapter can be installed. NEC Corporation Revision 7.0 – October 23, 2015 37 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 7 Other Add-in Components 7.1 Cooling Fan Kit Product Name / Description Part Number Redundant Fan Kit Non-hot plug cooling fan for R110g-1E Non-redundant Fan Kit Non-hot plug cooling fan for R110g-1E N8181-111F N8181-115F NOTE: One of the fan kits must be installed. 7.2 Trusted Platform Module Kit Product Name / Description Part Number Trusted Platform Module Kit TPM 1.2 module N8115-15 NOTE: The kit is not available in China. The kit is not removable after attachment. "TPM Support" in BIOS setup menu must be activated prior to use of this kit. To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker function. The recovery password is required to restore data for hardware replacement during a system error. 7.3 Internal Flash Memory Available socket: 1 Product Name / Description Part Number Internal Flash Memory Internal flash memory to enable software and tools in the EXPRESSBUILDR DVD without DVD media NOTE: Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the flash memory. The following operations can be performed with the flash memory: - Installation of Windows server with express setup - Installation of Starter Pack—the package of NEC qualified drivers and system setting tools - Installation of NEC ESMPRO Agent and Universal RAID Utility - Performance of the Test and Diagnosis Tool N8115-14 7.4 Flash FDD Choose the Flash FDD if you need to prepare an alternative device for a floppy drive. Product Name / Description Part Number Flash FDD USB flash emulating USB floppy disk, Native capacity 1.44 MB N8160-96 NOTE: Up to one drive can be connected. NEC Corporation Revision 7.0 – October 23, 2015 38 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 8 Add-on Components 8.1 17-inch LCD Console Drawer Category Drawer Drawer w/ KVM Cable Drawer Drawer w/o KVM Keypad 8.2 Product Name / Description Part Number 17-inch LCD Console Drawer (8 port) 17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port KVM switch, 1U height Switch Unit Connection Cable Set (USB, 1.8m) 1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB, 3m) 3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB, 5m) 5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A 17inch LCD Console Unit 1U 17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height, 4-pin USB B to 4-pin USB A cable 2 m, PS/2 Y-splitter cable 2m, 15-pin mini D-sub VGA cable 2 m 17inch LCD Console Drawer (1 port) 17-inch LCD, US 103-keys Keyboard with 10-key, Touch pad with 3-button, 1U height, 4-pin USB B to 4-pin USB A cable 1.8 m, Two PS/2 cable 1.8 m, 15-pin mini D-sub VGA cable 1.8 m Keyboard Unit (JP) JP 108-keys Keyboard with 10-key for N8143-84F 17inch LCD Console Drawer (1 port) Keyboard Unit (UK) UK 104-keys Keyboard with 10-key, for N8143-84F 17inch LCD Console Drawer (1 port) N8143-77F K410-118(1A) K410-118(03) K410-118(05) N8143-76F N8143-84F N8143-85 N8143-87 KVM Switch Category Product Name / Description Part Number KVM Switch Server Switch Unit (8 server) 1U USB 8 port KVM switch N8191-12F Switch Unit Connection Cable Set (USB,1.8m) 1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,3m) 3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,3m) 5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable 1.8 m 1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x PS/2 K410-118(1A) Cable KVM Cascading NEC Corporation Revision 7.0 – October 23, 2015 K410-118(03) K410-118(05) K410-119(1A) 39 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E 8.3 Server Management License The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the standard management features. For more extensive remote KVM and remote media features, choose the following kit. Product Name / Description Part Number Remote KVM and Media License Kit N8115-04 License for one server. Remote KVM and remote media are enabled regardless of OS status. Remote KVM: Displays a graphics console on the web browser of the remote terminal (PC/server). Controls keyboard and mouse via the remote terminals' web browser Remote media: Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals (PC/server) as if accessing the local drives. NOTE: Remote KVM and remote media features are not available for virtual machines. NOTE: Remote KVM and remote media features are not available for virtual machines. 8.4 Dust Proof Filter Kit The server supports the dust resistant feature. Choose the following kit to install the system in dusty places. Product Name / Description Part Number Dust Proof Filter 10 sheets, dust proof filter for R110g-1E N8147-07 NOTE: The filter kit is make-to-order product. Please consult our sales representative in regards to production lead time. NEC Corporation Revision 7.0 – October 23, 2015 40 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E References Server Management The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system management features listed in the table below. Standard Hardware monitoring Temperature/fan/voltage/power consumption/SystemLAN/degeneration(memory) Hardware configuration information collection Hardware event log collection Boot monitoring BIOS/POST stall, Booting, OS stall, shutdown Alerting HW error, Boot error and OS panic (by SNMP, E-Mail) Remote KVM (via LAN) POST/BIOS setup, ROM utility Remote control (via LAN) 4 2 1 1,3 CUI-based screen (OS console) 1,4 GUI-based screen (OS console) - Remote KVM Video Record - Remote reset/power on-off/ dump Remote Power Capping BIOS/BMC FW update Remote BIOS setup(partial configuration only) 2 2 Remote media (CD/DVD/FD/USB) - CLP (Command Line Protocol) (DMTF compliant) Remote control via Web browser (multi user login at the same time) 2 2 Maintenance EXPRESSSCOPE® Profile key (Backup/restore BIOS/BMC setup information) Others Set automatic IP address via DNS/DHCP LDAP/Active Directory verification/user control Clock synchronization of main unit and the RTC Access log collection Industry Standard 3 Scheduling (without UPS, require NEC ESMPRO Manager) 2 2 Panic screen, Boot screen OS shutdown 1 With Remote KVM and Media License kit IPMI support 2.0 2.0 The optional serial port is not available for the feature The feature is not supported on VMware systems Monitoring boot screens is not supported on VMware systems. In VMware systems, only the direct console user interface is supported. NEC Corporation Revision 7.0 – October 23, 2015 41 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E OS Support Matrix for PCI Cards and Embedded Controllers ESXi 5.1 ESXi 5.5 ESXi 6.0 RHEL 5 x64 RHEL 5 RHEL 6 x64 RHEL 6 RHEL 7 WS 2008 WS 2008 R2 WS 2012 WS 2012 R2 Part Number Product Name - Embedded SATA non-RAID Controller - Embedded SATA RAID Controller - - Embedded 1GbE NIC N8103-142 SAS Controller - - - N8103-171 RAID Controller (0MB, RAID 0/1) - - - N8103-172 RAID Controller (512MB,RAID 0/1) N8103-173 RAID Controller (512MB,RAID 0/1/5/6) N8103-174 RAID Controller (1GB,RAID 0/1/5/6) N8103-168 RAID Controller (1GB,RAID 0/1/5/6) N8103-161 RAID Controller (1GB,RAID 0/1/5/6) N8190-153 Fibre Channel Controller - N8190-154 Fibre Channel Controller (2ch) - N8190-157 Fibre Channel Controller - - - - - - N8190-158A Fibre Channel Controller (2ch) - - - - - - N8104-133 Quad Port 1000BASE-T Adapter N8104-138 1000BASE-T Adapter N8104-132 Dual Port 1000BASE-T Adapter N8104-145 Dual Port 1000BASE-T Adapter - N8104-153 Dual Port 10GBASE-T Adapter - N8104-128 10GBASE Adapter (SFP+/2ch) N8104-146 Single Port InfiniBand Adapter - - - - - - - - - Dual Port InfiniBand Adapter - - - - - - - - - N8104-147 NEC Corporation - Revision 7.0 – October 23, 2015 - - - - - - - - - - - - - - - 42 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Supported PCI cards and Installable Slots Slots Part Number Product Name #1 #2 N8103-142 SAS Controller N8103-171 RAID Controller (0MB, RAID 0/1) - N8103-172 RAID Controller (512MB,RAID 0/1) - N8103-173 RAID Controller (512MB,RAID 0/1/5/6) - N8103-174 RAID Controller (1GB,RAID 0/1/5/6) - N8103-168 RAID Controller (1GB,RAID 0/1/5/6) - N8103-161 RAID Controller (1GB,RAID 0/1/5/6) N8190-153 Fibre Channel Controller N8190-154 Fibre Channel Controller (2ch) N8190-157 Fibre Channel Controller N8190-158A Fibre Channel Controller (2ch) - N8104-133 Quad Port 1000BASE-T Adapter N8104-138 1000BASE-T Adapter N8104-132 Dual Port 1000BASE-T Adapter N8104-145 Dual Port 1000BASE-T Adapter N8104-128 10GBASE Adapter (SFP+/2ch) N8104-153 Dual Port 10GBASE-T Adapter N8104-146 Single Port InfiniBand Adapter - N8104-147 Dual Port InfiniBand Adapter - N8117-01A Serial Port Adapter For the configuration limitation for VMware ESXi, refer to the following documents. VMware ESXi5.1 https://www.vmware.com/pdf/vsphere5/r51/vsphere-51-configuration-maximums.pdf VMware ESXi5.5 https://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf VMware ESXi6.0 https://www.vmware.com/pdf/vsphere6/r60/vsphere-60-configuration-maximums.pdf NEC Corporation Revision 7.0 – October 23, 2015 43 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Linux is a trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less. NEC Corporation Revision 7.0 – October 23, 2015 44 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R110g-1E Revision History Revision Date Description 7.0 October 23, 2015 New products added: External DVD Super MULTI Drive / N8160-97F Discontinued product deleted: External DVD-ROM drive / N8160-91 6.0 July 16, 2015 Discontinued product deleted: PCIe SSD Adapter 365GB N8118-01 Others: Added RHEL 7 to the list of operating system supported Changed the maximum memory size supported by Red Hat Enterprise Linux 6 (x86_64) Added URL links to VMware documents for the configuration limitation 5.0 April 17, 2015 Others: Added ESXi 6 to the list of operating system supported 4.0 January 28, 2015 Part number changed: Flash FDD / N8160-96 3.0 November 21, 2014 New products addedDual Port 10GBASE-T Adapter / N8104-153 Discontinued product deleted: 2GB DDR3L-1600 UNB Memory Kit / N8102-523F 2.0 October 16, 2014 New products added: PCIe SSD Adapter 365GB / N8118-01 Part number changed: Fibre Channel Controller (2ch) / N8190-158A Others: Added Red Hat Linux 7 to the list of operating system supported Update OS support matrix 1.0 July 18, 2014 Initial release NEC Corporation Revision 7.0 – October 23, 2015 45