Power MOSFET, 100V, 10.8mOhm, 70A, N

NDPL070N10B
Advance Information
www.onsemi.com
Power MOSFET
100V, 10.8mΩ, 70A, N-Channel
Features
VDSS
• Low On-Resistance
• Low Gate Charge
• High Speed Switching
• 100% Avalanche Tested
• Pb-Free and RoHS Compliance
100V
RDS(on) Max
10.8 mΩ@15V
ID Max
70A
12.8 mΩ@10V
Electrical Connection
N-Channel
Applications
D(2)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
G(1)
Value
Unit
Drain to Source Voltage
VDSS
100
V
Gate to Source Voltage
VGSS
±20
V
Drain Current (DC)
ID
70
A
280
A
Drain Current (Pulse)
PW≤10μs, duty cycle≤1%
Power Dissipation
Tc=25°C
IDP
°C
°C
IS
70
A
EAS
82
mJ
260
°C
Tstg
Source Current (Body Diode)
Avalanche Energy (Single Pulse) *1
TL
Marking
W
175
Tj
Storage Temperature
Purposes, 3mm from Case for 10 Seconds
72
−55 to +175
Junction Temperature
Lead Temperature for Soldering
2.1
PD
S(3)
070N10
TO-220-3L
B
LOT No.
Thermal Resistance Ratings
Parameter
Symbol
Value
Junction to Case Steady State
RθJC
2.08
Junction to Ambient *2
RθJA
71.4
Unit
°C/W
Note : *1 VDD=48V, L=100μH, IAV=30A (Fig.1)
*2 Insertion mounted
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
January 2015 - Rev. P0
1
Publication Order Number :
NDPL070N10B/D
NDPL070N10B
Electrical Characteristics at Ta = 25°C
Parameter
Symbol
Value
Conditions
min
typ
Unit
max
Drain to Source Breakdown Voltage
V(BR)DSS
ID=10mA, VGS=0V
Zero-Gate Voltage Drain Current
IDSS
VDS=100V, VGS=0V
10
μA
Gate to Source Leakage Current
IGSS
VGS=±20V, VDS=0V
±100
nA
Gate Threshold Voltage
VGS(th)
VDS=10V, ID=1mA
4
V
Forward Transconductance
gFS
VDS=10V, ID=35A
50
RDS(on)1
ID=35A, VGS=15V
9.0
10.8
mΩ
RDS(on)2
ID=35A, VGS=10V
9.8
12.8
mΩ
Static Drain to Source On-State Resistance
100
V
2
S
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
Turn-ON Delay Time
td(on)
Rise Time
tr
Turn-OFF Delay Time
td(off)
Fall Time
tf
Total Gate Charge
Qg
Gate to Source Charge
Qgs
Gate to Drain “Miller” Charge
Qgd
Forward Diode Voltage
VSD
IS=70A, VGS=0V
1.1
Reverse Recovery Time
trr
See Fig.3
95
ns
Reverse Recovery Charge
Qrr
IS=70A, VGS=0V, di/dt=100A/μs
240
nC
VDS=50V, f=1MHz
See Fig.2
VDS=48V, VGS=10V, ID=70A
2,010
pF
840
pF
21
pF
30
ns
180
ns
55
ns
40
ns
26
nC
9
nC
8
nC
1.5
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Fig.1 Unclamped Inductive Switching Test Circuit
D
≥50Ω
10V
0V
L
G
VOUT
D
G
VDD
P.G
Fig.3 Reverse Recovery Time Test Circuit
D
L
G
ID=35A
RL=1.37Ω
PW=10μs
D.C.≤1%
NDPL070N10B
50Ω
NDPL070N10B
VDD=48V
VIN
VIN
S
10V
0V
Fig.2 Switching Time Test Circuit
S
VDD
Driver MOSFET
www.onsemi.com
2
50Ω
S
NDPL070N10B
NDPL070N10B
www.onsemi.com
3
NDPL070N10B
www.onsemi.com
4
NDPL070N10B
Package Dimensions
NDPL070N10BG
TO-220, 3-Lead/TO-220-3L
CASE 221AU
ISSUE O
unit : mm
1:Gate
2:Drain
3:Source
ORDERING INFORMATION
Device
Package
Shipping
note
NDPL070N10BG
TO-220-3L
SC-46,TO-220AB
50 pcs. / tube
Pb-Free
Note on usage : Since the NDPL070N10B is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
www.onsemi.com
5