F E D C B A 3,2 `0,2 8,65 `0,3 NOTES: 1. METALSHELLS: STEEL; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; GREEN 3. SIGNAL CONTACTS: COPPER ALLOY PLATING: 8µin HARD GOLD over min. 50µin NICKEL (5:1) 4. NO CONTACTS ON POS. A1 - A7 D D 5. METAL BRACKETS: STEEL; min. 320µin TIN over 80µin NICKEL 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1mm; PCB-THICKNESS: 1,6mm 8. P.C.B. HOLE DRILLINGS ON SHEET 2 3,86 +- 0,31 0,49 9. MAXIMUM TORQUE VALUE FOR THREAD: 6 in.LB 6,13 +- 0,17 0,08 0,8 9,4 `0,3 10. CONNECTOR IS PART MARKED: 3024W7SAU99G40X CONEC ABC 0,31 67 +- 0,45 C C 61,11 +- 0,13 0,12 10,82 +- 0,05 0,2 15,39 +- 0,36 0,4 52,5 +- 0,05 0,2 n0,6 `0,05 (17x) 10° PCB SNAP B B 17,2 `0,2 REF 18 PRESS FOR FIXING ON PCB METAL BRACKET NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH SEE NOTE 10 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC 12,24 `0,2 3024W7SAU99G40X CONEC ABC scale: material: tolerance 2:1 (5:1) see notes dim. in mm date A title: name drawn 09.08.2010 Henneboel D-SUB COMBINATION FEMALE 90° appd. 09.08.2010 Koch 24W7S with threaded insert, metal bracket and snap dwg no: Inventor 10 DIN- norm d-old Origin rev. description D date part no: name C A3 sh: 1 13K1A3369 R a B 3024W7SAU99G40X A F E D C B A D D P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 61,11 +- 0,13 0,12 n3,1 `0,1 (2x) + 0,1 n1 - 0 (17x) 2,77 `0,1 1 5,54 `0,1 10,2 `0,1 C 13,04 C P.C.B. EDGE 8,28 `0,1 11,05 `0,1 13,82 `0,1 16,56 `0,1 19,33 `0,1 B B TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 22,1 `0,1 scale: material: tolerance 3:1 SEE SHEET 1 dim. in mm date A title: name drawn 09.08.2010 Henneboel P.C.B. HOLE DRILLINGS appd. 09.08.2010 Koch D-SUB COMBINATION FEMALE 90°, 24W7S with threaded insert, metal bracket and snap dwg no: Inventor 10 DIN- norm d-old Origin rev. description D date part no: name C A3 sh: 2 13K1A3369 R a B see sheet 1 A