X-Band Block Upconverter 20 Watt UB63043 Series General Information: Intended for outdoor environments, the CPI Locus Microwave UB63043 Series of integrated Block Up Converters utilize proprietary RF techniques to achieve high power in an efficient package. This compact unit can be mounted on the antenna for maximum efficiency of operation. The unit has M&C interfaces plus simple LED indicators showing status and condition of the unit. Features: 16 Watt(typical) Linear Output Power User Controlled Gain Adjustment Field-proven Weatherproof Package Internal Filtering Included Integrated M&C Exceptional Power Efficiency Designed to support SATCOM terminal certification per requirements set forth in MIL-STD-188-164B 11885DS Rev - Americas (Head Office) CPI Satcom Products Palo Alto, CA USA T: +1 (650) 846-3803 F: +1 (650) 424-1744 Europe, Middle East & Africa CPI International Inc. Cham, Switzerland T: +41 (41) 560 7550 F: +41 (41) 560 7551 CPI Europe, Limited Surrey, England T: +44 (1932) 256 930 F: +44 (1932) 241 271 Asia Pacific CPI Asia, Inc. Singapore T: +65 6225 0011 F: +65 9620 5200 www.cpii.com [email protected] UB63043 Series X-Band 20W Block Upconverter Range Units 950-1450 MHz Notes Electrical Specifications Input Frequency Output Frequency 7.900-8.400 GHz 6.950 GHz LO External Reference Frequency 10.000 000 MHz @ 0 dBm +/-5dB @ 100 Hz offset @ 1 kHz offset -63 max. -73 max. dBc/Hz dBc/Hz @ 10 kHz offset -83 max. dBc/Hz @ 100 kHz offset @ 1 MHz offset -93 max. -103 max. dBc/Hz dBc/Hz 70 min dB At minimum attenuation Gain Flatness ±1.25 max. dB per full band Gain Slope ±0.4 max. dB per 40 MHz ±2.5 dB Phase Noise (SSB) Gain Gain Stability vs Temperature Gain Adjust Psat Plinear Third Order Intermodulation Distortion Group Delay (per 50 MHz) Linear Parabolic Ripple (full band) AM-PM Conversion Output Noise Power (7.9-8.4 GHz) Output Noise Power (7.25-7.75 GHz) 10 dB, 0.5 dB steps +43.0 typ. dBm +42.0 typ., +41.5 min. dBm Note 1 -26 max. dB Measured at total power 2dB below Plinear 0.05 0.002 3 peak-peak ns/MHz ns/MHz2 ns 2 max. o /dB -98 max. dBm/Hz @ Plinear -128 max. dBm/Hz Input VSWR 1.50 typ., 1.70 max. :1 Output VSWR 1.25 typ., 1.30 max. :1 Overdrive +0 max. dBm non-damaging Spurious, Signal Related (@ rated PLINEAR) -60 max. dBc within output band Spurious, Signal Independent -30 max. dBm outside of band M&C Function included Isolator Included RS-232 Power Requirement Input Voltage Power (small signal/Plinear) +22 min to +54 max. vdc 30 / 80 watts Mechanical Specifications Size See Outline Drawing 11741 Weight 5.3 lbs. Finish epoxy paint white Type N Female NATO green or desert tan available Connectors IF Input/Ext. Reference RF Output DC Power M&C WR112 Waveguide UG-138/U Flange MS3112E8-2P 62IN-57A-12-14S Environmental Operating Temperature Humidity -40 °C to +60 °C 100% with condensation Specifications are subject to change 11885 DS Rev Note1: Measurement per WGS X-Band and Ka-Band Terminal Performance Certification Test Procedures, Version 1.01, 09 April 2008, Para. 5.6.2.1 www.cpii.com [email protected] UB63 Series GaN X-Band Block Upconverter Model Number Configuration Guide Construct ModelNumber 1 2 3 4 5 6 UB 6 3 0 43 - x x x x Start 1 Package Type Output Power (dBm) 0 = Standard 42 x = TBD 43 = 20W 2 5 Output = 16W 3 Gain 0 = 60dB 1 = 70dB x = TBD 1 x = 48VDC = TBD 6 Input Connector 0 = UG-138/U 0 = Type N (f) x = TBD x = TBD Customization MateTypes (Addt'l Charge) Comms Type 0 = RS-232 1 = RS-422/485 x = TBD 0 =None 1 =Mating Connector Set 2 =Mating Pigtail Set x =TBD Selected Model Number 1 2 3 UB 6 3 0 43 - x 1 2 3 4 5 6 4 Voltage = Standard Package Type Output Power (dBm) = 20W = TBD Gain 0 Voltage 0 Output 0 Input Conn Finish Color 0 = White 1 = Dark Green 2 = Desert Tan 3 = Beige 4 = Sand 5 = Forest Green 6 = Metalast x = TBD 37925 34094 33446 37722 33303 34083 INCOMPLETE CONFIGURATION 4 x 5 x 6 x Additional Info Comms Type Mate Types Finish Custom Specs 0 0 0 = RS-232 =None = White 37925 Consult Factory