5.0 TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC FIGURE 1: SCHEMATIC DIAGRAM 1 PARAMETER SPEC LIMITS MIN. TYP. MAX. UNITS 531 649 uH 12 (40V@300mA) PRIMARY 1 PRIMARY INDUCTANCE 1 - 3. Voltage = 1.00Vrms Frequency = 100 KHZ 590 2 11 (12V@800mA) LEAKAGE iNDUCTANCE 1 - 3. All other windings shorted together. RESONANT FREQUENCY TURN 3-1 3-1 3-1 3-1 10.0 850 RATIO : 5-6 : 12-9 : 12-7 : 12-11 PRIMARY 2 uH KHz 3 7,8 (8V@75mA) 1:.158 1:.396 1:.317 1:.27 HIPOT: 60Hz for 1 second. Primary 1- 6 To Secondary 7 - 12. 5 SECONDARY BIAS 9 (GND) 3000 -------- -------- Vrms 6 NOTE: PINs 7 AND 8 MUST BE CONNECTED ON PCB. FIGURE 2: MARKING AND PHYSICAL DIMENSIONS mm 31.0 (1.22) MAX 37.8 (1.488) MAX WHITE DOT OVER PIN#1 P M POL-HX009 YYWW 26.0 (1.024) MAX 1 5.0 (.197) 0.8 (.032) 6 25.0 (.984) 3 4 1 5 30.0 (1.181) * Design to comply with the requirements of UL/CSA/IEC 60950-1. * Design to comply with the requirements of UL, IEC & CSA Insulation System Class B. * All units comply with the requirements of EU RoHS Directive. * All materials per Premier Magnetics UL file #E177139.AllCOC 6 30.0 (1.181) 12 11 10 9 8 7 REV. 10/24/11 DESCRIPTION OF CHANGES ORIGINAL RELEASE RoHS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: Millimeters Angle .X + 0.1 +0 O 30' .XX + 0.06 DO NOT SCALE DRAW ING TRANSFORMER CONTROL DRAWING PREMIER P/N: POL-HX009 REVISION: 10/24/11 ENGR: PETER PHAM REF: TOP 258MN QA: KEVIN CLARK SHEET: 1 OF 1 BY KC