TECH. CORP. SPECIFICATIONS CUSTOMER : CJP001 SAMPLE CODE : SG240128WRFAGAHPCQ MASS PRODUCTION CODE : PG240128WRFAGAHPCQ SAMPLE VERSION : 02 SPECIFICATIONS EDITION : 003 DRAWING NO. (Ver.) : JLMD-PG240128WRFAGAHPCQ_001 PACKAGING NO. (Ver.) : JPKG-PG240128WRFAGAHPCQ_001 Customer Approved POWERTIP 2011.01.04 Date: JS RD APPROVED Approved Checked Designer 閆偉 劉進 Lori 王傑 Kyo Wang Ryan Yan □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 RECORDS OF REVISION Date (mm / dd / yyyy) Ver. Edi. Description Page Design by - - 07/21/2006 0 - PG240128WRFAGAHPCQ is the ROSH compliant part number based on Powertip’s standard PG240128WRF-AGAHPC 08/14/2007 A - Update Backlight Characteristics - - 12/30/2010 02 003 Modify LCM Mechanical Diagram 9 Kyo Total：36 Pages PG240128WRFAGAHPCQ Page2 SAMPLE Ver.02 SPEC Edi.003 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Display Command 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty 6. Appendix: 1. LCM Drawing 2. Packaging PG240128WRFAGAHPCQ Page3 SAMPLE Ver.02 SPEC Edi.003 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 240*128 dots LCD Type FSTN, White Transflective, Positve,Extended temp Driver Condition LCD Module :1/128Duty, 1/12Bias Viewing Direction 6H Backlight White LED B/L Weight 160 g Interface - Other(controller / driver IC) SAP1024B ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news/LatestNews.asp 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 144.0(L)*104.0(W)*16.0(H)(MAX) mm Viewing Area 114.0(L)*64.0(W) mm Active Area 107.95(L)*57.55(W) mm Dot Size 0.40(L)*0.40(W) mm Dot Pitch 0.45(L)*0.45(W) mm Note：For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD - -0.3 7.0 V LCD Driver Supply Voltage VEE - 0 22.0 Input Voltage VIN - -0.3 VDD+0.3 V Operating Temperature TOP Excluded B/L -20 70 ℃ Storage Temperature TST Excluded B/L -30 80 ℃ Storage Humidity HD Ta＜40 ℃ - 90 %RH PG240128WRFAGAHPCQ Page4 SAMPLE Ver.02 SPEC Edi.003 1.4 DC Electrical Characteristics Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD - 4.5 5.0 5.5 V “H” Input Voltage VIH - VDD-2.2 - VDD V “L” Input Voltage VIL - 0 - 0.8 V “H” Output Voltage VOH - VDD-0.3 - VDD V Operating Frequency fOSC 0.4 - 5.5 MHz “L” Output Voltage VOL - 0 - 0.3 V Supply Current IDD VDD =5.0V fosc=3.0MHz*1 - 35 -20℃ - - - 25℃*2 17.0 17.2 17.4 70℃ - - - LCM Driver Voltage VOP 50 mA V NOTE: *1 The Maximum current display *2 The VOP test point is VDD- VEE PG240128WRFAGAHPCQ Page5 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page6 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page7 SAMPLE Ver.02 SPEC Edi.003 1.6 Backlight Characteristics LCD Module with LED Backlight Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 160 mA Reverse Voltage VR Ta =25℃ - 5 V Power Dissipation PO Ta =25℃ - 0.67 W PG240128WRFAGAHPCQ Page8 SAMPLE Ver.02 SPEC Edi.003 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PG240128WRFAGAHPCQ Page9 SAMPLE Ver.02 SPEC Edi.003 2.2 Interface Pin Description PG240128WRFAGAHPCQ Page10 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page11 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page12 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page13 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page14 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page15 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page16 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page17 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page18 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page19 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page20 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page21 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page22 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page23 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page24 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page25 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page26 SAMPLE Ver.02 SPEC Edi.003 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PG240128WRFAGAHPCQ run & Reliability test Inspection NG Shipment Ship out Page27 SAMPLE Ver.02 SPEC Edi.003 Item Customer Sales Info Claim R&D Q.A Manufactu ring Product control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PG240128WRFAGAHPCQ 2. Process improvement proposal 4. Education And Training Activities Page28 SAMPLE Ver.02 SPEC Edi.003 3.2 Inspection Specification PG240128WRFAGAHPCQ Page29 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page30 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page31 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page32 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page33 SAMPLE Ver.02 SPEC Edi.003 PG240128WRFAGAHPCQ Page34 SAMPLE Ver.02 SPEC Edi.003 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃→ +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PG240128WRFAGAHPCQ Page35 SAMPLE Ver.02 SPEC Edi.003 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM . 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PG240128WRFAGAHPCQ Page36 SAMPLE Ver.02 SPEC Edi.003