TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH800480T013-IBC MASS PRODUCTION CODE : PH800480T013-IBC SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. (Ver.) : JLMD- PH800480T013-IBC _001 PACKAGING NO. (Ver.) : - Customer Approved POWERTIP 2013.07.23 Date: JS RD APPROVED Approved Checked Designer 閆偉 劉進 譚超敏 ■ Preliminary specification for design input □ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) 07/18/2013 Ver. Edi. 01 001 Description Page Design by New Drawing. - 譚超敏 Total: 30 Page PH800480T013-IBC Page2 SAMPLE Ver.01 SPEC Edi.001 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 1.7 Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：1.LCM Drawing PH800480T013-IBC Page3 SAMPLE Ver.01 SPEC Edi.001 1. SPECIFICATIONS 1.1 Features 1.2 Item Standard Value Display Type 800 * (RGB) * 480 LCD Type a-Si TFT , Normally white , Transmissive type Screen size(inch) 7.0 inch Viewing Direction 6 O’clock Backlight Type LED B/L Weight TBD Interface RGB Interface ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web site : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 192.96(L)*108.76(W)*7.725(H) mm Item Standard Value Unit Active Area 154.08 (W) * 85.92 (L) mm LCD panel Note：For detailed information please refer to LCM drawing. PH800480T013-IBC Page4 SAMPLE Ver.01 SPEC Edi.001 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit -0.3 6.0 V 0.3 40 V -20 0.3 V DVDD AVDD Power Supply Voltage GND=0 VGH VGL AGND=0 0.5 15 V VGH - VGL - 0 6 V Operating Temperature TOP - -20 70 °C Storage Temperature TST - -30 80 °C Remark - The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed. 1.4 DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Supply Voltage VCOM Input signal Voltage Supply Current Symbol Min. Typ. Max. DVDD 3.0 3.3 3.6 VGH 15.3 16.0 16.7 VGL -7.7 -7.0 -6.3 AVDD 10.2 10.4 10.6 VCOM - 3.8 - VIH 0.7DVDD - DVDD VIL 0 - 0.3DVDD - TBD - - TBD TBD IDD Unit Remark V V V mA Pattern= Full display Pattern= Black *1 Note1: Maximum current display. PH800480T013-IBC Page5 SAMPLE Ver.01 SPEC Edi.001 1.5 Optical Characteristics DVDD = 3.3 V, Ta=25°C TFT LCD Module Item Symbol Min. Typ. Max. - 10 20 - 15 30 - 60 - - 60 - - 60 - Rise Tr Fall Tf Top θ+ Bottom θ- Left θL Right θR - 60 - CR 500 600 - X TBD TBD TBD Y TBD TBD TBD X TBD TBD TBD TBD TBD TBD X TBD TBD TBD Y TBD TBD TBD X TBD TBD TBD Y TBD TBD TBD Response time Viewing angle Condition Contrast ratio White Red Color of CIE Coordinate （With B/L&TP） Green Y Blue - CR ≥ 10 - unit ms Note 2 Deg. Note 1 Note 3 - Note4 Average Brightness Pattern=white display (With B/L&TP )*1 IV - TBD 400 - cd/m2 Note1 Uniformity (With B/L &TP)*2 △B - 70 - - % Note1 Note 4 : 1：△B=B(min) / B(max) * 100% 2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 9 θθ 500 ㎜ LCM Colorimeter=BM-7 fast PH800480T013-IBC Page6 SAMPLE Ver.01 SPEC Edi.001 Note 1. Optical characteristics-2 Viewing angle Rear (12H) φ=90° Top (θ=0°) θL θR θ+ θ- Left (9H) φ=180° Right (3H) φ =0° Front (6H) φ=270° Viewing angle PH800480T013-IBC Page7 SAMPLE Ver.01 SPEC Edi.001 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr PH800480T013-IBC Tf Page8 SAMPLE Ver.01 SPEC Edi.001 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 3 2 1 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/B (1-2/B)Vop 1/fF 1/fD Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period PH800480T013-IBC Page9 SAMPLE Ver.01 SPEC Edi.001 Note 3. : Definition of Vth Selected waveform 100 Transmittance 73% No selected waveform 50% Vth1 Vth2 Drive Active voltage range View direction Drive waveform Transmittance Vth1 10° (Selected waveform) 50% Vth2 40° (No selected waveform) 73% ※1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System Photo Detector θ Human Active Temperature Control Chamber ψ LCD Panel Transmissive Measuring System: Autronic DMS-803 PH800480T013-IBC Page10 SAMPLE Ver.01 SPEC Edi.001 1.6 Backlight Characteristics Maximum Ratings Item Symbol Min. Max. Unit LED Forward Current IF 25 mA LED Reverse Voltage VR 1.2 V Remark One LED Electrical / Optical Characteristics Item Symbol Min. Typ. Max. Unit Remark LED Voltage VL 9.0 9.9 10.5 V Note1 LED Current IL - 240 - mA - LED life time - - 30000 - Hr Note2 Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IL =240mA. Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25℃ and IL =160mA. The LED lifetime could be decreased if operating IL is lager than 240mA. VLED+ VLED- PH800480T013-IBC Page11 SAMPLE Ver.01 SPEC Edi.001 1.7 Touch Panel Characteristics 1.7.1 Prouduct Features 1.7.2 Environmental Characterstic 1.7.3 Optical Characteristics PH800480T013-IBC Page12 SAMPLE Ver.01 SPEC Edi.001 1.7.4 Electric Characteristics 1.7.5 Temperature test condition PH800480T013-IBC Page13 SAMPLE Ver.01 SPEC Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH800480T013-IBC Page14 SAMPLE Ver.01 SPEC Edi.001 2.2 Interface Pin Description SYMBOL 1 VLED+ Power For LED backlight (+). Power 2 VLED+ Power For LED backlight (+). Power 3 VLED- Power For LED backlight (-). Power 4 VLED- Power For LED backlight (-). Power 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 GND Vcom DVDD MODE DE VS HS B7 B6 B5 B4 B3 B2 B1 B0 G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 GND DCLK PH800480T013-IBC DESCRIPTION Type:Remark Pin NO. Power ground. Common voltage. Power for Digital Circuit. DE/SYNC mode select. Data Input Enable. Vertical Sync Input. Horizontal Sync Input. Blue Data(MSB). Blue Data. Blue Data. Blue Data. Blue Data. Blue Data. Blue Data. Blue Data(LSB). Green Data(MSB). Green Data. Green Data. Green Data. Green Data. Green Data. Green Data. Green Data(LSB). Red Data(MSB). Red Data. Red Data. Red Data. Red Data. Red Data. Red Data. Red Data(LSB). Power Ground Sample clock Page15 Power I I I,Note 1 I I I I I I I I I I:Note 2 I:Note 2 I I I I I I I:Note 2 I:Note 2 I I I I I I I:Note 2 I:Note 2 Power I:Note 3 SAMPLE Ver.01 SPEC Edi.001 Pin NO. 38 39 40 41 42 43 44 45 46 47 48 49 50 SYMBOL GND L/R U/D VGH VGL AVDD RESET NC VCOM DITHB GND NC NC I:input DESCRIPTION Power Ground. Left / right selection. Left / right selection. Gate On Voltage. Gate OFF Voltage. Power for Analog Circuit. Global reset pin. No connection. Common Voltage. Dithering Function. Power Ground. No connection. No connection. Type:Remark Power I:Note 4 I:Note 4 Power Power Power I:Note 5 I I:Note 6 Power - Note 1: DE/SYNC mode select. Normally pull high. When select DE mode, MODE=”1”, VS and HS must pull high. When select SYNC mode, MODE= ”0”, DE must be grounded. Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be grounded. Note 3: Data shall be latched at the falling edge of DCLK. Note 4: Selection of scanning mode. Note 5: Global reset pin. Active low to enter reset state. Suggest to connect with an RC reset circuit for stability. Normally pull high. Note 6: Dithering function enable control, normally pull high. When DITHB=”1”,Disable internal dithering function. When DITHB=”0”,Enable internal dithering function. PH800480T013-IBC Page16 SAMPLE Ver.01 SPEC Edi.001 2.3 Timing Characteristics 2.3.1 Signal AC Characteristics PH800480T013-IBC Page17 SAMPLE Ver.01 SPEC Edi.001 2.3.2 Input Timing Setting Horizontal input timing diaqram PH800480T013-IBC Page18 SAMPLE Ver.01 SPEC Edi.001 Vertical input timing diaqram PH800480T013-IBC Page19 SAMPLE Ver.01 SPEC Edi.001 2.3.3 Power On/Off Characteristics PH800480T013-IBC Page20 SAMPLE Ver.01 SPEC Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH800480T013-IBC run & Reliability test Inspection NG Shipment Ship out Page21 SAMPLE Ver.01 SPEC Edi.001 Item Customer Sales Info Claim R&D Manufact Product Inventory Purchase uring control control Q.A Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH800480T013-IBC 2. Process improvement proposal 4. Education And Training Activities Page22 SAMPLE Ver.01 SPEC Edi.001 3.2 Inspection Specification PH800480T013-IBC Page23 SAMPLE Ver.01 SPEC Edi.001 PH800480T013-IBC Page24 SAMPLE Ver.01 SPEC Edi.001 PH800480T013-IBC Page25 SAMPLE Ver.01 SPEC Edi.001 PH800480T013-IBC Page26 SAMPLE Ver.01 SPEC Edi.001 PH800480T013-IBC Page27 SAMPLE Ver.01 SPEC Edi.001 PH800480T013-IBC Page28 SAMPLE Ver.01 SPEC Edi.001 4. RELIABILITY TEST 4.1 (Ver.B01) Reliability Test Condition NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → 4 Temperature Cycling Storage Test +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Apply 2 KV with 5 times Discharge for each polarity +/- 5 6 ESD Test Vibration Test (Packaged) Drop Test (Packaged) Contact Discharge: Apply 250 V with 5 times discharge for each polarity +/- 1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 7 → +80℃ → +25℃ Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※1 corner / 3 edges / 6 sides each 1times PH800480T013-IBC Page29 SAMPLE Ver.01 SPEC Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH800480T013-IBC Page30 SAMPLE Ver.01 SPEC Edi.001