2015-3장 2015.1.20 03:36 PM 페이지75 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS UC Chip type, High Reliability Series Solvent Proof WV≦100V ・Chip type, high temperature range, for 125° C use ・Designed for surface mounting on high density PC board ・Applicable to automatic insertion machine using carrier tape ・Complied to the RoHS directive Item Characteristics Operating temperature range -40 ~ +125° C WV≦100 I = 0.03CV or 4μA whichever is greater (after 2 minutes) WV≧160 I = 0.04CV + 100μA(after 1 minutes) ±20% at 120Hz, 20° C Leakage current max. Capacitance tolerance WV tanδ 10 0.32 16 0.24 25 0.21 35~63 0.18 80~100 0.12 160~200 250~400 0.2 0.24 WV Z-25° C/Z+20° C Z-40° C/Z+20° C 10 8 12 16 6 8 25 4 6 35~63 4 4 80~100 3 4 160~200 250~400 3 6 6 10 Dissipation factor max. (at 120Hz, 20° C) Low temperature characteristics (Impedance ratio at 120Hz) Load life (after application of the rated voltage for 2000 hours at 125° C) Less than specified value Within ±30% of initial value Less than 300% of specified value Leakage current Capacitance change tanδ After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Resistance to soldering heat The following specifications shall be satisfied when the capacitors are restored to 20° C after exposing them at 250° C for 10 seconds. Less than specified value Leakage current Within ±10% of initial value Capacitance change Less than specified value tanδ Unit : mm ● DRAWING (See page 59) -Series code of UC is “U” ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV μF 10 22 33 47 68 100 220 330 470 1000 10 8×6.2 8×10 10×10 10×10 12.5×13.5 WV μF 3.3 4.7 10 22 33 47 68 16 65 125 200 200 525 80 8×10 8×10 10×10 10×10 12.5×13.5 8×6.2 8×10 10×10 10×10 12.5×13.5 25 65 125 200 200 525 100 45 45 80 80 300 8×10 10×10 10×10 12.5×13.5 12.5×13.5 8×6.2 8×6.2 8×10 10×10 12.5×13.5 35 65 65 125 200 525 65 125 200 200 525 65 65 125 200 525 525 63 8×6.2 8×10 8×10 10×10 12.5×13.5 12.5×13.5 40 67 67 115 335 335 400 12.5×13.5 12.5×13.5 30 30 Ripple current (mA rms) at 125° C, 120Hz Case size ØD×L(mm) 160 45 80 80 300 300 8×6.2 8×10 10×10 10×10 12.5×13.5 50 8×6.2 8×6.2 8×10 10×10 12.5×13.5 12.5×13.5 10×10 12.5×13.5 200 45 85 10×10 12.5×13.5 250 45 85 12.5×13.5 12.5×13.5 45 85 Ripple current (mA rms) at 125° C, 120Hz Case size ØD×L(mm) ● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1kHz 10kHz≦ Coefficient 0.70 1.00 1.17 1.36 1.50 75 CHIP TYPES Shelf life (at 125° C)