2015-3장 2015.1.20 03:36 PM 페이지67 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS JL Chip type, Long Life Series Long Life Solvent Proof ・Chip type, long life capacitance in large case size ・For ECU ・Application to automatic insertion machine using carrier tape ・Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current Capacitance tolerance -40 ~ +105° C I = 0.03CV or 4μ A whichever is greater (after 2 minutes) ±20% (20° C, 120Hz) Dissipation factor max. (at 120Hz, 20° C) Rated Voltage(V) tanδ 10 0.32 16 0.24 25 0.21 35 0.18 50 0.18 WV Z-25° C/Z+20° C Z-40° C/Z+20° C 10 6 12 16 4 10 25 3 8 35 2 6 50 2 6 Low temperature characteristics (Impedance ratio at 120Hz) Load life (after application of the rated voltage for 10000 hours at 105° C) Less than specified value Within ±30% of the initial value Less than 300% of the specified value Leakage current Capacitance change tanδ After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Resistance to soldering heat The following specifications shall be satisfied when the capacitors are restored to 20° C after exposing them at 250° C for 10 seconds. Less than specified value Leakage current Within ±30% of the initial value Capacitance change Less than 300% of the specified value tanδ Unit : mm ● DRAWING (See page 55) -Series code of JL is “P” ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV μF 33 47 100 220 330 470 10 8×10 8×10 10×10 16 270 270 315 8×10 8×10 10×10 10×10 25 270 270 315 315 8×10 10×10 10×10 35 163 200 304 8×10 10×10 10×10 90 132 249 50 8×10 8×10 10×10 75 90 167 Ripple current (mA rms) at 105° C, 120Hz Case size ØD×L(mm) ● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1kHz 10kHz≦ Coefficient 0.70 1.00 1.17 1.36 1.50 67 CHIP TYPES Shelf life (at 105° C)