PRODUCT SPECIFICATION DATE：03/26/2012 cosmo Photocoupler： ELECTRONICS CORPORATION KPC6N139S NO.61P51004 SHEET 1 OF 5 General Purpose Type Photocoupler z Features 1. Pb free and RoHS compliant. 2. High current transfer ratio ( CTR：MIN. 500% at IF=1.6mA ) 3. High speed response ( tPHL：TYP. 0.2us at RL=270Ω ) 4. High common mode rejection voltage ( CMH：TYP. 500V/us ) 5. TTL compatible output 6. Agency Approvals UL approved：UL1577 , No.E169586 CUL approved：C22.2 No.1 & NTC No.5 , No.E169586 VDE approved：EN60747 , No.40006080 FIMKO approved：EN 60065 No. FI 25798 EN 60950 No. FI 25798 z Application： 1. Interfaces for computer peripherals. 2. Electronic calculators, measuring instruments, control equipment. 3. Telephone sets. 4. Signal transmission between circuits of different Potentials and impedances. REV. 2 PRODUCT SPECIFICATION DATE：03/26/2012 Photocoupler： cosmo NO.61P51004 KPC6N139S ELECTRONICS CORPORATION SHEET 2 OF 5 REV. 2 z Outside Dimension：Unit ( mm ) e d o C a t a D o9X m3 s 1X o6 NX c TOLERANCE：±0.2mm z Schematic：Top View 8 7 6 5 1 2 3 4 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. VB 8. VCC PRODUCT SPECIFICATION DATE：03/26/2012 cosmo Photocoupler： ELECTRONICS CORPORATION z NO.61P51004 KPC6N139S SHEET 3 OF 5 ( Ta=25℃ ) Unit mA mA A V mW Absolute Maximum Ratings Input Parameter Forward current *1 Peak forward current *2 Peak transient forward current Reverse voltage Power dissipation Symbol IF IF IFM VR P Rating 20 40 1 5 35 Supply voltage VCC -0.5 to 18 Output voltage VO -0.5 to 18 Output Emitter-base reverse with stand voltage ( Pin5 to 7 ) VEBO 0.5 *3 Average output current IO 60 Power dissipation PO 100 *4 Isolation voltage 1 minute Viso 5000 Operating temperature Topr 0 to +100 Storage temperature Tstg -55 to +125 *5 Soldering temperature 10 second Tsol 260 *1 50% duty cycle, Pulse width：1ms *2 Pulse width≦1us, 300pps *3 Decreases at the rate of 0.7mA/℃ if the external temperature is more than 25℃. *4 40 to 60% RH, AC for 1 minute *5 For 10 seconds z *6 Current transfer ratio Logic ( 0 ) output voltage V V V mA mW Vrms ℃ ℃ ℃ ( Ta=0 to +70℃ unless otherwise specified ) Conditions MIN. TYP. MAX. Unit Electro-optical Characteristics Parameter REV. 2 Symbol CTR(1) IF=0.5mA, VO=0.4V, VCC=4.5V 400 1800 - % CTR(2) IF=1.6mA, VO=0.4V, VCC=4.5V 500 1600 - % VOL(1) IF=6.4mA, IO=1.6mA, VCC=4.5V - 0.1 0.4 V VOL(2) IF=5mA, IO=15mA, VCC=4.5V - 0.1 0.4 V VOL(3) IF=12mA, IO=24mA, VCC=4.5V - 0.1 0.4 V Logic ( 1 ) output current IOH IF=0, VO=VCC=18V - 0.05 100 uA Logic ( 0 ) supply current ICCL IF=1.6mA, VO=open, VCC=5V - 0.5 - mA Logic ( 1 ) supply current ICCH IF=0, VF=open, VCC=5V - 10 - nA Ta=25℃, IF=1.6mA - 1.5 1.7 V IF=1.6mA - -1.9 - mV/℃ 5.0 - - V Input forward voltage Input forward voltage temperature coefficient VF △VF/△Ta Input reverse voltage BVR Ta=25℃, IR=10uA Input capacitance CIN VF=0, f=1MHz - 60 - pF *7 Leak current ( input-output ) II-O Ta=25℃, 45%RH VI-O=3KVDC, t=5s - - 1.0 uA *7 Isolation resistance ( input-output ) RI-O VI-O=500VDC - 1012 - Ω *7 Capacitance ( input-output ) CI-O f=1MHz - 0.6 - pF *6 Current transfer ratio is the ratio of input current and output current expressed in %. *7 Measured as 2-pin element ( Short 1, 2, 3, 4 and 5, 6, 7, 8 ) PRODUCT SPECIFICATION DATE：03/26/2012 Photocoupler： cosmo KPC6N139S ELECTRONICS CORPORATION z NO.61P51004 SHEET 4 OF 5 ( Ta=25℃, VCC=5V ) TYP. MAX. Unit Switching Characteristics Parameter Symbol - 5 25 uS RL=270Ω, IF=12mA - 0.3 1 uS RL=4.7KΩ, IF=0.5mA - 10 60 uS RL=270Ω, IF=12mA - 1.5 7 uS CMH IF=0, VCM=10VP-P, RL=2.2KΩ - 500 - V/uS CML IF=1.6mA, VCM=10VP-P, RL=2.2KΩ - -500 - V/uS tPHL Propagation delay time Output (0) Æ (1) tPLH *9 *10 Instantaneous common mode rejection voltage “ Output (1) “ *9 *10 Instantaneous common mode rejection voltage “ Output (0) “ *8 MIN. RL=4.7KΩ, IF=0.5mA Propagation delay time Output (1) Æ (0) *8 Conditions REV. 2 *9 Instantaneous common mode rejection voltage “ output (1) “ represents a common mode voltage variation that can hold the output above (1) level ( Vo > 2.0V ) *10 Instantaneous common mode rejection voltage “ output (0) “ represents a common mode voltage variation that can hold the output above (0) level ( Vo < 0.8V ) *8 Test Circuit Propagation Delay Time Pulse input IF Duty ratio = 1/10 0 IF 1 8 Vcc 2 7 3 6 Vo 4 5 C L =15pF 5V Vo IF monitor RL 1.5V 100Ω 1.5V t PHL t PLH *10 Test Circuit for Instantaneous Common Mode Rejection Voltage 10V IF 1 8 2 7 3 6 4 5 A B VFF 10% 90% Vcc=5V V CM 0V RL Vo CM H Vo 10% 90% tr tf 5V IF =0 2V VCM + - CM L Vo 0.8V IF =16mA VOL PRODUCT SPECIFICATION DATE：03/26/2012 cosmo ELECTRONICS CORPORATION Photocoupler： KPC6N139S NO.61P51004 SHEET 5 OF 5 z Notice The information contained in this document is intended to be a general product description and is subject to change without notice. Please contact cosmo in order to obtain the latest device data sheets before using any cosmo device. cosmo does not assume any responsibility for use of any circuitry described. No circuit patent licenses are implied. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or by any means, or transferred to any third party without the prior written consent of cosmo Electronics Corporation. The devices listed in this document are designed for general applications only in electronic equipment. No devices shall be deployed which require higher level of reliability such as： – – – – Medical and other life support equipments. Space application. Telecommunication equipment ( trunk lines ). Nuclear power control equipment. Unless it received prior written approval from cosmo. cosmo takes no responsibility for damages arise form the improper usage of our device. Please contact cosmo for further information regarding the above notices. REV. 2