PRODUCT SPECIFICATION DATE: 08/14/2008 cosmo Photocoupler : ELECTRONICS CORPORATION KPC410 NO.61P04029 REV SHEET 1 OF 7 2 Super High Speed Response Photocoupler Features ● 1. 5 pin Mini-flat package. 2. Super high speed response (tPLH,tPHL:typ.45ns at RL=350 ohm). 3. Instantaneous common mode rejection voltage(CMH:typ. 500V/us). 4. High isolation voltage between input and output (Viso:2500Vrms). 5. Low input current drive (IFHL: Max. 5mA). 6. LSTTL and TTL compatible output. ● Applications 1. High speed interfaces for computer peripherals, microcomputer systems. 2. High speed line receivers. 3. Noise reduction. 4. Interfaces for data transmission equipment. 5.Inverter. PRODUCT SPECIFICATION DATE: 08/14/2008 Photocoupler : cosmo KPC410 ELECTRONICS CORPORATION 1. OUTSIDE DIMENSION : NO. 61P04029 REV SHEET 2 OF 7 2 UNIT (mm) Date Code 2.30±0.5 0.10±0.10 3.90±0.5 4.40±0.5 0.50 0.40 2.54 7.00±0.4 TOLERANCE : ±0.2mm 2. SCHEMATIC 1 3 : Top View 6 5 4 1.Anode 3.Cathode 4.GND 5.Vo 6.Vcc PRODUCT SPECIFICATION DATE: 08/14/2008 cosmo Photocoupler : ELECTRONICS CORPORATION KPC410 NO. 61P04029 REV SHEET 3 OF 7 2 ●Absolute Maximum Ratings Input Output (Ta=25℃) Parameter Forward current (*1) Peak forward current (*2) Reverse voltage Power dissipation Supply voltage High level output voltage Low level output current Output collector power dissipation Isolation voltage 1 minute (*3) Operating temperature Storage temperature Soldering temperature 10 second Symbol IF IFM VR PD VCC VOIL IOL PC Viso Topr Tstg Tsol ●Electro-optical Characteristics Parameter Input forward voltage (*4) Input reverse voltage Input capacitance Logic (1) output current Logic (0) output voltage Logic (1) supply current Logic (0) supply current Leak current (*5) Isolation resistance (input-output) (*5) Capacitance (input-output ) (*5) Propagation delay time Output (0)Æ(1) (*6) Propagation delay time Output (1)Æ(0) (*6) Symbol VF BVR CIN IOH Rating 25 40 5 45 7 7 50 85 2500 -40 to +85 -55 to +125 260 ( Ta= 0 to+ 85°C unless otherwise specified) Conditions IF=10mA,Ta=25℃ IR=10uA,Ta=25℃ VF=0, f=1MHZ VCC=3.3V,VO=5.5V,IF=250uA VCC=3.3V,IF=5mA, VOL IOL(Sinking)=13mA ICCH VCC=3.3V,IF=0mA ICCL VCC=3.3V,IF=10mA II-O 45%RH,Ta=25℃,t=5s,VI-O=3000VDC RI-O VI-O=500V, Ta=25℃ CI-O f=1MHZ, Ta=25℃ tPLH IF=7.5mA,VCC=3.3V,RL=350Ω, tPHL Output rise-fall time (10 to 90%) Instantaneous common mode rejection voltage “output(0)” (*7) CMH Instantaneous common mode rejection voltage “output(1)” (*7) CML tr,tf Unit mA mA V mW V V mA mW Vrms ℃ ℃ ℃ CL=15pF,Ta=25℃ IF=7.5mA,VCC=3.3V,RL=350 IF=0mA, VCM=10V,VO(Min)=2.0V RL=350Ω IF=5mA, VCM=10V,VO(Max)=0.8V RL=350Ω MIN. TYP. MAX. Unit – 1.6 1.75 V – 5 V – 60 pF 2 250 uA - 0.4 0.6 V – - 7 13 1012 0.6 15 18 1.0 - mA mA mA Ω pF - 45 100 ns - 45 75 ns – 30 - ns - 500 - V/us - -500 - V/us PRODUCT SPECIFICATION DATE: 08/14/2008 cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 NO. 61P04029 REV SHEET 4 OF 7 2 Note ) Typical values are all at Vcc = 3.3V, Ta= 25°C *1 Ta=0 to 70°C. *2 Pulse width <= 1ms *3 40 to 80%RH AC for 1 minute ,f=60HZ. *4 At Iin =10mA, VF decreases at the rate of 1.6mV/°C if the temperature goes up. *5 Measured as 2-pin element. Connect pins 2 and 3, connect pins 5, 6, 7 and 8. *6 Refer to the Fig. 1. *7 CMH represents a common mode voltage ignorable rise time ratio that can hold logic (1) state in output. CML represents a common mode voltage ignorable fall time ratio that can hold logic (0) state in output. ●Recommmended Operating Conditions Parameter Low level input current High level input current Supply voltage Fanout (TTL load ) Operating temperature Symbol IFL IFH VCC N Topr Circuit Block Diagram Anode Vcc Vo GND Min 0 7.0 4.5 -40 Max 250 15 5.5 8 85 Unit uA mA V ℃ PRODUCT SPECIFICATION DATE: 08/14/2008 cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 NO. 61P04029 REV SHEET 5 OF 7 2 Fig.1 Test Circuit for Propagation Delay time IF 7.5mA Pulse input 3.75mA 5V 0.1uF 0mA TPHL 350Ω Vo TPLH VO CL 5V 90% 1.5V 10% VOL tf tr Fig.2 Test Circuit for Instantaneous Common Mode Rejection Voltage VCM 10V 90% 10% 5V 0.1uF SW A tr Vo CL B 90% 10% 350Ω SW:B (IF=0) VO tf 0V 5V Vo(min) VCM Vo(max) VO SW:A (IF=5mA) VOL PRODUCT SPECIFICATION DATE: 08/14/2008 ELECTRONICS CORPORATION KPC410 NO. 61P04029 REV SHEET 6 OF 7 2 Fig.2 Input Diode Forward Voltage vs. Forward Current Forward Current I F (mA) cosmo Photocoupler : Forward Voltage V F (V) PRODUCT SPECIFICATION DATE: 08/14/2008 cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 NO. 61P04029 REV SHEET 7 OF 7 2