深圳市腾恩科技有限公司 SHENZHEN TENAND TECHNOLOGY CO.,LTD http://www.tenand.com PRODUCT cosmo SPECIFICATION Photocoupler : ELECTRONICS CORPORATION KPC6N137 DATE:12/17/2009 NO.60P51012 REV SHEET 1 OF 7 3 Super High Speed Response Photocoupler Features ● 1. Super high speed response (tPLH,tPHL:typ.45ns at RL=350 ohm). 2. Instantaneous common mode rejection voltage(CMH:typ. 500V/us). 3. High isolation voltage between input and output (Viso:5000Vrms). 4. Low input current drive (IFHL: Max. 5mA). 5. LSTTL and TTL compatible output. ● Applications 1. High speed interfaces for computer peripherals, microcomputer systems. 2. High speed line receivers. 3. Noise reduction. 4. Interfaces for data transmission equipment. PRODUCT SPECIFICATION DATE: 12/17/2009 Photocoupler : cosmo KPC6N137 ELECTRONICS CORPORATION 1. OUTSIDE DIMENSION : NO.60P51012 REV SHEET 2 OF 7 3 UNIT (mm) cosmo 6N137 XXX 7.62 9.68 2.70 0.4 3.00 3.50 6.50 0.26 1.20 0.5 2.54 13.00° 13.00° TOLERANCE : ±0.2mm : Top View 6 5 1 2 3 4 8 7 2. SCHEMATIC 1.NC 2.Anode 3.Cathode 4.NC 5.GND 6.Vo 7.VE 8.Vcc PRODUCT SPECIFICATION DATE: 12/17/2009 cosmo Photocoupler : ELECTRONICS CORPORATION KPC6N137 NO.60P51012 REV SHEET 3 OF 7 3 ●Absolute Maximum Ratings Input Output (Ta=25℃) Parameter Forward current (*1) Peak forward current (*2) Reverse voltage Power dissipation Supply voltage Enable voltage High level output voltage Low level output current Output collector power dissipation Isolation voltage 1 minute (*3) Operating temperature Storage temperature Soldering temperature 10 second Symbol IF IFM VR PD VCC VE VOIL IOL PC Viso Topr Tstg Tsol Rating 20 40 5 45 7 5.5 7 50 85 5000 -40 to +85 -55 to +125 260 Unit mA mA V mW V V V mA mW Vrms ℃ ℃ ℃ ●Electro-optical Characteristics Parameter Input forward voltage (*4) Input reverse voltage Input capacitance Logic (1) output current Logic (0) output voltage Logic (1) enable current Logic (0) enable current Logic (1) supply current Logic (0) supply current Leak current (*5) Isolation resistance (input-output) (*5) Capacitance (input-output ) (*5) Propagation delay time Output (0)Æ(1) (*7) Propagation delay time Output (1)Æ(0) (*7) Output rise-fall time (10 to 90%) Enable propagation delay time Output (1)Æ(0) (*8) Enable propagation delay time Output (0)Æ(1) (*8) Instantaneous common mode rejection voltage “output(0)” (*9) Instantaneous common mode rejection voltage “output(1)” (*9) Symbol VF BVR CIN IOH Conditions IF=10mA,Ta=25℃ IR=10uA,Ta=25℃ VF=0, f=1MHZ VCC=5.5V,VO=5.5V,IF=250uA,VE=2.0V VCC=5.5V,VEH=2V,IF=5mA, VOL IOL(Sinking)=13mA IEH VCC=5.5V,VE=2.0V IEL VCC=5.5V,VE=0.5V ICCH VCC=5.5V,VE=0.5V,IF=0mA ICCL VCC=5.5V,VE=0.5V,IF=10mA II-O 45%RH,Ta=25℃,t=5s,VI-O=3000VDC RI-O VI-O=500V, Ta=25℃ CI-O f=1MHZ, Ta=25℃ tPLH IF=7.5mA,VCC=5V,RL=350Ω, tPHL tr,tf tELH tEHL CL=15pF,Ta=25℃ IF=7.5mA,VCC=5V,RL=350Ω,CL=15pF IF=7.5mA,RL=350Ω,CL=15pF, VEH=3.0V, VEL=0.5V IF=0mA, CMH VCM=10V,VO(Min)=2.0V RL=350Ω IF=5mA, CML VCM=10V,VO(Max)=0.8V RL=350Ω MIN. TYP. MAX. Unit – 1.6 1.75 V – 5 V – 60 pF 2 250 uA - 0.4 0.6 V -2.0 – - -0.8 -1.2 7 13 1012 0.6 15 18 1.0 - mA mA mA mA mA Ω pF - 45 75 ns - 45 75 ns – 30 - ns – 40 - ns - 15 - ns - 500 - V/us - -500 - V/us PRODUCT SPECIFICATION DATE: 12/17/2009 cosmo ELECTRONICS CORPORATION Photocoupler : KPC6N137 NO.60P51012 REV SHEET 4 OF 7 3 Note ) Typical values are all at Vcc = 5V, Ta= 25°C *1 Ta=0 to 70°C. *2 Pulse width <= 1ms *3 40 to 80%RH AC for 1 minute ,f=60HZ. *4 At Iin =10mA, VF decreases at the rate of 1.6mV/°C if the temperature goes up.*6 Ta=0 to 70°C. *5 Measured as 2-pin element. Connect pins 2 and 3, connect pins 5, 6, 7 and 8. *6 DC current transfer ratio is defined as the ratio of output collector current to forward bias input current. *7 Refer to the Fig. 1. *8 Refer to the Fig. 2. *9 CMH represents a common mode voltage ignorable rise time ratio that can hold logic (1) state in output. CML represents a common mode voltage ignorable fall time ratio that can hold logic (0) state in output. ●Recommmended Operating Conditions Parameter Symbol Low level input current High level input current High level enable voltage Low level enable voltage IFL IFH VEH VEL VCC N Supply voltage Fanout (TTL load ) Truth Table Input H L H L H L Enable H H L L NC NC Circuit Block Diagram Ouput L H H H L H Min 0 7.0 2.0 0 4.5 - Max 250 15 Vcc 0.8 5.5 8 Unit uA mA V V V - PRODUCT SPECIFICATION DATE: 12/17/2009 cosmo ELECTRONICS CORPORATION Photocoupler : KPC6N137 NO.60P51012 REV SHEET 5 OF 7 3 Fig.1 Test Circuit for Propagation Delay time Fig.2 Test Circuit for Enable Propagation Delay Time Fig.3 Test Circuit for Instantaneous Common Mode Rejection Voltage PRODUCT SPECIFICATION DATE: 12/17/2009 ELECTRONICS CORPORATION KPC6N137 NO.60P51012 REV SHEET 6 OF7 3 Fig.2 Input Diode Forward Voltage vs. Forward Current Forward Current I F (mA) cosmo Photocoupler : Forward Voltage V F (V) PRODUCT SPECIFICATION DATE: 12/17/2009 cosmo ELECTRONICS CORPORATION Photocoupler : KPC6N137 NO.60P51012 REV SHEET 7 OF 7 3