AXIAL LEAD TAPING SPECIFICATIONS FOR RECTIFIERS Axial lead devices are packed in accordance with EIA standard RS-296-D and specifications shown below: COMPONENT OUTLINE COMPONENT PITCH A INNER TAPE PITCH B +0.5mm(.020") +1.5mm(.059") R-1 5.0mm 26.0mm A-405 5.0mm 26.0mm A-405 5.0mm DO-41 DO-41 DO-15 R-3 DO-27 R-6 5.0mm 5.0mm 5.0mm 5.0mm 10.0mm 10.0mm CUMULATIVE PITCH TOLERANCE +0.5mm(.020") 2.0mm/20pitch 2.0mm/20pitch 52.4mm 2.0mm/10pitch 52.4mm 52.4mm 52.4mm 52.4mm 52.4mm 2.0mm/20pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 2.0mm/10pitch 26.0mm 90 +5 Z D0 A E W D1 L1 B D L2 T E ITEM Component alignment Tape width Exposed adhesive SYMBOL Z SPECIFICATIONS (mm) 1.2 max. SPECIFICATIONS (inch) 0.048 max. T 6.0+0.4 0.236+0.016 E L1 L2 0.8 max. 0.032 max. 1.0 max. 0.040 max. Reel outside diameter D 330.0 13.0 Reel inner diameter Feed hole diameter Reel width D1 85.7+0.3 D0 W 30.0+0.4 79.0+1.0 3.375+0.012 0.655+0.016 3.110+0.040 Body eccentricity NOTES: 1. Each component lead shall be sandwiched between tapes for a minimum of 3.2mm (0.126"). 2. The reel width "W" for 26mm taping is 50.0+1.0mm (1.97"+0.040").