RS101M THRU RS107M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * Low leakage Low forward voltage Low cost Mounting position: Any RS-1M .146 (3.7) .130 (3.3) .582 (14.8) MECHANICAL DATA .559 (14.2) .406 (10.3) .582 (14.8) .543 (13.8) .09 (2.3) .043 (0.9) .035 (0.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .059 (1.5) .043 (1.1) .059 (1.5) .043 (1.1) .421 (10.7) * Epoxy: Device has UL flammability classification 94V-O .024 (0.6) .016 (0.4) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .165 (4.2) .165 (4.2) .165 (4.2) .149 (3.8) .149 (3.8) .149 (3.8) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RS101M RS102M RS103M RS106M RS107M UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 50 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 1.0 Amps I FSM 30 Amps A 2 /Sec 2 Current Squarad Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range RS104M RS105M I T 3.7 R q JC 15 R q JA 50 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C SYMBOL RS101M VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. RS102M RS103M RS104M RS105M 1.0 RS106M RS107M UNITS Volts 2.0 100 uAmps 2010-05 REV:B AVERAGE FORWARD CURRENT, (A) 1.0 0.8 0.6 0.4 Single Phase Half Wave 60 Hz Inductive or Resistive Load 0.2 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS101M THRU RS107M ) 4 1.0 0.4 0.1 0.04 0.01 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 O FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 1000 TA = 100 OC 100 10 TA = 25 OC 1.0 0.1 0 20 40 60 80 100 0.5 1.0 1.5 2.0 2.5 3.0 3.5 INSTANTANEOUS FORWARD VOLTAGE, (V) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (mA) AMBIENT TEMPERATURE, ( C) 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 30 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 5 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description Rectron Logo RS10XM Part No. Voltage-code VYWW Year – code (Y:Last digit of year& A:2010, B:2011……) Week – code (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE EA PER CARTON WEIGHT(Kg) RS-1M -C 1,350 540*118*118 560*259*144 2,700 12.03 (mm) (mm) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.