High Reliability NPN Silicon Phototransistor OP602, OP603, OP604 (TX, TXV) OP604 (S) Features: • • • • Miniature hermetically sealed package Wide range of collector currents Ideal for direct mounting to PCBoard TX, TXV & S devices are processed to MIL-PRF-19500 Product Photo Here Description: Each device in the OP600 high reliability series consists of a high-reliability NPN silicon phototransistor that is mounted in a glass-lensed miniature hermetically sealed “pill” package with an 18° half angle, as measured from the optical axis to the half-power point. After electrical testing by manufacturing, devices are processed to OPTEK’s 100 percent screening program, which is patterned after MIL-PRF-19500. Components in the high reliability OP600 series are mechanically and spectrally matched to the OP223 and OP224 high reliability series of infrared emitting diodes. TX, TXV and S devices are processed to OPTEK’s military screening program patterned after MIL-PRF-19500. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) and to Application Bulletin OP202 for pill-type soldering to PCBoard. Applications: • • • • • • Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor Part Number OP602TX OP602TXV OP603TX OP603TXV OP604S OP604TX OP604TXV Light Current VCE Input Power Viewing IC(ON) (mA) Min / Max Typ / Max EE (mW/cm2) Angle 2.00 / 5.00 4.00 / 8.00 5 / 50 20.0 35° 7.00 / NA 1 .123 [3.12] .111 [2.82] 2 Pin # Sensor 1 2 Collector/Cathode Emitter/Anode [ MILLIMETERS] DIMENSIONS ARE IN: INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.OPTEKinc.com Issue A 08/2010 Page 1 of 2 High Reliability NPN Silicon Phototransistor OP602, OP603, OP604 (TX, TXV) OP604 (S) Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage Temperature Range -65° C to +150° C Operating Temperature Range -55° C to +125° C Collector-Emitter Voltage 50 V Emitter-Collector Voltage 7.0 V Soldering Temperature (5 seconds with soldering iron) Power Dissipation (1) 260° C (2) 50 mW Electrical Characteristics (TA = 25°C unless otherwise noted) Input Diode SYMBOL IC (ON) ICEO PARAMETER On-State Collector Current OP602TX, OP602TXV OP603TX, OP603TXV OP604TX, OP604TXV, OP604S Collector Dark Current MIN 2 4 7 TYP - MAX 5 8 - UNITS TEST CONDITIONS mA VCE = 5.0 V, EE = 20 mW/cm2(3)(4) - - 25 nA VCE = 10.0 V, EE = 0 - - 100 µA VCE = 30.0 V, EE = 0 TA = 100° C V(BR)CEO Collector-Emitter Breakdown Voltage 50 - - V IC= 100 µA, EE = 0 V(BR)ECO Emitter-Collector Breakdown Voltage 7 - - V IC= 100 µA, EE = 0 VCE(SAT) Collector-Emitter Saturation Voltage - - 0.4 V IC = 0.4 mA, EE = 20 mW/cm(2)(3)(4) tf Rise Time - - 20 tr Fall Time - - 20 µs VCC = 30 V, IC = 1.00 mA, RL = 100 Ω(2)(3)(4) Notes: (1) (2) (3) (4) (5) Refer to Application Bulleting 202, which discusses proper techniques for soldering pill-type devices to PCBoards. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when wave soldering. Derate linearly 0.5 mW/° C above 25° C. Junction temperature maintained at 25° C. Light source is an unfiltered tungsten lamp operating at CT=2870 K or equivalent source. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 08/2010 Page 2 of 2 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.OPTEKinc.com