30 nsec Rectifier & Bridge Assemblies

30 nsec, 600 to 22000 volts
Rectifier & Bridge Assemblies
NEW PRODUCT ANNOUNCEMENT
Solid State Devices, Inc.
AS9100:2009 Rev. C and ISO 9001:2008 Registered
Solid State Devices, Inc.
Solid State Devices, Inc. is AS9100:2009 Rev. C and ISO 9001:2008 Registered
SSDI is a world-renowned leader in the design and manufacture of semiconductors, assemblies, and modules.
As a pioneer semiconductor manufacturer for over 40 years, SSDI has
earned and maintained a reputation for setting the highest standards
of reliability and performance. This reputation has been built upon
unsurpassed technology and quality in the areas of high density/high
power and high voltage discrete semiconductors and modules.
This catalog represents technical data for the line of Solid State Devices, Inc. 30 nsec, 600 to 22000 volts
Rectifier and Bridge Assemblies. Complete specifications for the individual devices are provided in the form
of data sheets from SSDI’s web site:
www.ssdi-power.com
It has been SSDI’s long-standing commitment to its customers to provide products that meet their specific
needs and exact specifications. This is achieved by offering custom solutions and a broad line of standard
products. In addition to this product line, SSDI offers many products and services:
Power High Voltage Rectifiers
Zener and TVS Products
Power MOSFETs and IGBTs
Power Transistors and Darlingtons
Power Modules and Hybrids
High Voltage Power Supplies
High Voltage Modules and Assemblies
Thyristors
Voltage Multipliers
IGBT/MOSFET Bridge Assemblies
Obsolete and DMS Semiconductors
Die Products
Parts Management
Testing and Screening Services
Consulting
For additional information and data sheets:
14701 Firestone Blvd. La Mirada, CA 90638 | (562) 404-4474 | FAX (562) 404-1773 | [email protected] | www.ssdi-power.com
The information in this book has been carefully checked and is believed to be
accurate; however, no responsibility is assumed for errors or omissions.
Solid State Devices, Inc. reserves the right to make changes without further
notice to any product herein. Solid State Devices, Inc. does not assume
liability arising out of the application or use of any product or circuit described
herein; neither does it convey any license under its patent rights nor the rights
of others.
™
Solid State Devices, Inc. and
are registered trademarks of Solid
State Devices, Inc. Solid State Devices, Inc. is an Equal Opportunity/Affirmative Action Employer.
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact SSDI.
SSDI components may be used in life-support devices or systems only with
the express written approval of SSDI. Failure of such components can be
reasonably expected to cause the failure of that life-support device or system,
or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intentionally implanted in a human body, or used to
support and/or maintain and/or protect human life. If they fail, it is reasonable
to assume that the health of the user or other persons may be endangered.
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies Version 1.4 (10/13) - Entire contents copyright © 2013 Solid State Devices, Inc. All Rights Reserved.
No part of this catalog may be reproduced, transmitted, rewritten, scanned, stored mechanically or electronically, translated into other languages, or adapted for
any use without the express written permission of Solid State Devices, Inc.
2
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
High reliability screening available (see page 10)
Table of Contents
30 nsec, 600 to 22000 volts
Rectifier & Bridge Assemblies*
▪ 30 nsec Rectifier Product Family ......................................................... 4
▪ SHF1160 - SHF1190 Series ................................................................. 6
Bridge Rectifier Assemblies
▪ SDA172HF Series ................................................................................ 6
▪ SDA173HF Series ................................................................................ 7
▪ SDA174HF Series ................................................................................ 7
▪ SDA175HF Series ................................................................................ 8
High Voltage Assemblies
▪ SDAD101M2.5HF - SDAD101M13HF Series ....................................... 8
▪ SPX2094 Series................................................................................... 9
▪ SDA5000HF - SDA22000HF Series...................................................... 9
▪ Screening Flows ................................................................................ 10
▪ Sales Representatives ....................................................................... 11
*TX, TXV, and S-level screening available for all devices. Screening based on MIL-PRF-19500.
Screening flows available on request.
Data sheets available at www.ssdi-power.com
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
3
30 nsec Rectifier Product Family
DISCRETE RECTIFIERS
■ SHF1160 - SHF1190 Series
30 nsec / 1 amp / 600 to 900 volts
Hyper Fast Rectifier (pg. 6)
BRIDGE RECTIFIER ASSEMBLIES
■ SDA172HF Series
■ SDA173HF Series
*Available in surface mount version (pg. 6)
*Available in surface mount version (pg. 7)
30 nsec / 1.3 amps / 600 to 900 volts
Single Phase Bridge Rectifier Assembly
■ SDA174HF Series
■ SDA175HF Series
(pg. 7)
(pg. 8)
30 nsec / 2.0 amps / 600 to 900 volts
Single Phase Bridge Rectifier Assembly
4
30 nsec / 2.5 amps / 600 to 900 volts
Three Phase Bridge Rectifier Assembly
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
30 nsec / 3.0 amps / 600 to 900 volts
Three Phase Bridge Rectifier Assembly
High reliability screening available (see page 10)
HIGH VOLTAGE ASSEMBLIES
■ SDAD101M2.5HF - SDAD101M13HF Series
30 nsec / 2500 to 13000 volts
Hyper Fast Stackable High Voltage Rectifier (pg. 8)
■ SPX2094 Series
30 nsec / 1.0 amp / 15000 volts
High Voltage Rectifier Bridge Stack
(pg. 9)
■ SDA5000HF - SDA22000HF Series
30 nsec / 0.5 amp / 5000 to 22000 volts
High Voltage Rectifier (pg. 9)
Data sheets available at www.ssdi-power.com
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
5
SHF1160 - SHF1190 Series
30 nsec / 1 amp / 600 to 900 volts
Hyper Fast Rectifier
▪
▪
▪
▪
▪
▪
Case Outline: Axial Leaded
D
Low reverse leakage current
Hermetically sealed
Void free construction
For high efficiency applications
Higher voltages available - consult factory
TX, TXV, and S Level screening available1/
B
ØC
Electrical Characteristics
Symbol
SHF1160
SHF1170
SHF1180
SHF1190
Peak Repetitive Reverse and
DC Blocking Voltage
Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA=25°C)
Peak Surge Current (8.3ms Pulse, Half Sine Wave, TA=25°C)
Operating & Storage Temperature
Junction to Leads, L=3/8”
Junction to Tabs
Maximum Thermal Resistance
Electrical Characteristics
Units
VRRM
VRSM
VR
Value
600
700
800
900
Dim
A
B
C
D
Volts
IO
1.0
Amps
IFSM
25
Amps
TOP & TSTG
-65 to +175
°C
RθJL
RθJE
50
28
°C/W
Symbol
Max
Units
Instantaneous Forward Voltage Drop (IF = 1A, TA = 25°C pulsed)
VF
1.9
Volts
Instantaneous Forward Voltage Drop (IF = 1A, TA = -55°C pulsed)
VF
2.4
Volts
Reverse Leakage Current (Rated VR, TA = 25°C pulsed)
IR
10
µAmps
Reverse Leakage Current (Rated VR, TA = 100°C pulsed)
IR
200
µAmps
Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25°C)
tRR
30
nsec
Junction Capacitance (VR = 10V, TA = 25°C, f=1MHz)
CJ
18
pF
D
ØA
Min
0.100”
0.130”
0.027”
1.00”
Max
0.135”
0.185”
0.033”
--
Case Outline: Surface Mount Square Tab (SMS)
A
C
A
D
B
Dim
A
B
C
D
Min
0.140”
0.180”
0.020”
0.002”
Max
0.155”
0.230”
0.030”
--
1/ Screening based on MIL-PRF-19500. Screening flows available on request.
RC0157A
SDA172HF Series
30 nsec / 1.3 amps / 600 to 900 volts
Single Phase Bridge Rectifier Assembly
Hermetically sealed internal discretes
Thermal conductive epoxy encapsulated
Surface (-2) or radial mounting
Available in higher voltages - consult factory
Available in standard, fast, and ultra fast versions
TX, TXV, and S Level screening available1/
IFSM (A)
25°C
25°C
50°C
100°C
25°C
VF
(V)
IF
(A)
Case Outline: SDA172
.62
.37
IR (µA)
-
Max (ns)
Maximum
Reverse
Current (per
leg) @ PIV
AC
IF (avg)
PIV (V)
Maximum
Forward
Voltage
Drop
(per leg)
AC
Peak
Forward
Surge
Current
(1 cycle)
-
Average DC
Output
Current
Tc = Case
Temperature
AC
Part Number
Peak
Inverse Reverse
Voltage Recovery
Time2/
(per
leg)
+
▪
▪
▪
▪
▪
▪
100°C
1.00
10
200
1.9
1.00
10
200
1.9
1.00
10
200
HF
600
30
1.3
1.00
25
1.9
SDA172K
SDA172K-2
HF
700
30
1.3
1.00
25
SDA172L
SDA172L-2
HF
800
30
1.3
1.00
25
SDA172M
SDA172M-2
HF
900
30
1.3
1.00
25
1.9
1/ Screening based on MIL-PRF-19500. Screening flows are available on request.
2/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR = 0.25A
6
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
1.00
10
200
.62
.37
.220
MAX
AC
25°C
+
25°C
SDA172J
SDA172J-2
.50
MIN
.41
.50
MIN
.220
MAX
4x Ø.030
.09
MIN
.24
.41
.24
.050
.000
.09 MIN
RA0103A
High reliability screening available (see page 10)
SDA173HF Series
30 nsec / 2.5 amps / 600 to 900 volts
Three Phase Bridge Rectifier Assembly
▪
▪
▪
▪
▪
▪
Hermetically sealed internal discretes
Thermal conductive epoxy encapsulated
Surface (-2) or radial mounting
Available in higher voltages - consult factory
Available in standard, fast, and ultra fast versions
TX, TXV, and S Level screening available1/
IFSM (A)
25°C
50°C
100°C
25°C
25°C
IR (µA)
25°C
100°C
2.5
2.00
25
1.9
1.00
10
250
SDA173K
SDA173K-2
HF
700
30
2.5
2.00
25
1.9
1.00
10
250
SDA173L
SDA173L-2
HF
800
30
2.5
2.00
25
1.9
1.00
10
250
SDA173M
SDA173M-2
HF
900
30
2.5
2.00
25
1.9
1.00
10
250
.18
.12
.18
.12
.23
.17
.875
MIN
.42
±.03
.875
MIN
+
30
.31
.25
1.00
±.03
AC
600
.73
1.00 .67
±.03
.31
.25
+
HF
.73
.67
5x Ø.030
AC
SDA173J
SDA173J-2
5x Ø.030
AC
25°C
IF
(A)
VF
(V)
Case Outline: SDA173
AC
Max (ns)
Maximum
Reverse
Current (per
leg) @ PIV
-
IF (avg)
PIV (V)
Maximum
Forward
Voltage
Drop
AC
Peak
Forward
Surge
Current
(1 cycle)
-
Average DC
Output
Current
Tc = Case
Temperature
AC
Part Number
Peak
Inverse Reverse
Voltage Recovery
Time2/
(per
leg)
.05
.00
.10 MIN
.23
.17
.25
±.03
.43
±.03
1/ Screening based on MIL-PRF-19500. Screening flows are available on request.
2/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR = 0.25A
.25
±.03
.10 MIN
RA0104A
SDA174HF Series
30 nsec / 2.0 amps / 600 to 900 volts
Single Phase Bridge Rectifier Assembly
▪
▪
▪
▪
▪
▪
Hermetically sealed internal discretes
Aluminum case
Thermal conductive epoxy encapsulated
Available in higher voltages - consult factory
Available in standard, fast, and ultra fast versions
TX, TXV, and S Level screening available1/
Part Number
SDA174J
HF
Peak
Inverse
Voltage
(per
leg)
Reverse
Recovery
Time2/
Average DC
Output
Current
Tc = Case
Temperature
Peak
Forward
Surge
Current
(1 cycle)
PIV (V)
Max (ns)
IF (avg)
IFSM (A)
25°C
25°C
50°C
100°C
25°C
600
30
2.0
1.8
25
Maximum
Forward
Voltage
Drop
VF
(V)
IF
(A)
25°C
1.9
1.00
Maximum
Reverse
Current (per
leg) @ PIV
Case Outline: SDA174
RED DOT (+)
.425±.010
Ø.152±.020
IR (µA)
25°C
100°C
10
200
.425
±.020
.600
±.020
.750
MIN
4x Ø.050±.005
SDA174K
HF
700
30
2.0
1.8
25
1.9
1.00
10
200
SDA174L
HF
800
30
2.0
1.8
25
1.9
1.00
10
200
SDA174M
HF
900
30
2.0
1.8
25
1.9
1.00
10
200
1/ Screening based on MIL-PRF-19500. Screening flows are available on request.
2/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR = 0.25A
Data sheets available at www.ssdi-power.com
.250
±.020
.600±.020
RA0105A
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
7
SDA175HF Series
30 nsec / 3.0 amps / 600 to 900 volts
Three Phase Bridge Rectifier Assembly
▪
▪
▪
▪
▪
▪
Hermetically sealed internal discretes
Aluminum case
Thermal conductive epoxy encapsulated
Available in higher voltages - consult factory
Available in standard, fast, and ultra fast versions
TX, TXV, and S Level screening available1/
Part Number
Peak
Inverse
Voltage
(per
leg)
Reverse
Recovery
Time2/
Average DC
Output
Current
Tc = Case
Temperature
Peak
Forward
Surge
Current
(1 cycle)
PIV (V)
Max (ns)
IF (avg)
IFSM (A)
25°C
25°C
50°C
100°C
25°C
Maximum
Forward
Voltage
Drop
VF
(V)
Case Outline: SDA175
Maximum
Reverse
Current (per
leg) @ PIV
IF
(A)
IR (µA)
25°C
25°C
100°C
SDA175J
HF
600
30
3.0
2.4
25
1.9
1.00
10
250
SDA175K
HF
700
30
3.0
2.4
25
1.9
1.00
10
250
SDA175L
HF
800
30
3.0
2.4
25
1.9
1.00
10
250
#4-40 UNF THRU
2 PLACES
1.062”
.31”
REF
.75”
.38”
.28”
REF
.40”
REF
.31”
REF
5x Ø .055” REF
Ø .095” REF
.475”
MAX
.325”
MAX
SDA175 M
HF
900
30
3.0
2.4
25
1.9
1.00
10
250
1.25”
RA0106A
1/ Screening based on MIL-PRF-19500. Screening flows are available on request.
2/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR = 0.25A
SDAD101M2.5HF - SDAD101M13HF
30 nsec / 2500 to 13000 volts
Hyper Fast Recovery Stackable High Voltage Rectifier
▪
▪
▪
▪
▪
▪
▪
Stackable to 600 kV+
Hermetically sealed internal discretes
Controlled avalanche rated
Modular design for easy stacking
Storage and operating temps -65°C to +150°C
Available in standard, fast and ultra fast versions
TX, TXV, and S level screening available1/
Part Number
Peak
Inverse
Voltage
Reverse
Recovery
Time2/
Average DC
Output
Current
Tc = Case
Temperature3/
Surge
NonRepetitive
IF (avg)
IFSM
Maximum
Forward
Voltage
Drop
PIV
(KV)
Max (ns)
VF
(V)
25°C
25°C
75°C
50°C
100°C
SDAD101M2.5HF
2.5
30
0.80
1.00
25
8.0
SDAD101M5.0HF
5.0
30
0.80
1.00
25
SDAD101M7.5HF
7.5
30
0.80
1.00
25
SDAD101M10HF
10
30
0.72
0.90
SDAD101M13HF
13
30
0.56
0.70
25°C
100°C
1.00
20
250
14.0
1.00
20
250
20.0
1.00
20
250
25
26.0
0.90
20
250
25
34
0.70
20
250
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
Case Outline: SDAD101
Ø .330"
.320"
.040"
.020"
10-32 THRD
Ø 1.000"
.970"
IR (µA)
25°C
1/ Screening based on MIL-PRF-19500. Screening flows available on request.
2/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp.
3/ TC = 50°C typical operation in oil.
TC = 75°C is typical ambient TA = 25°C
8
IF
(A)
Maximum
Leakage
Current @
PIV
1.100"
.980"
10-32 THRD
.235"
.230"
.190-32 UNF-2A
RA0102B
High reliability screening available (see page 10)
SPX2094 Series
30 nsec / 1.0 amp / 15,000 volts
High Voltage Rectifier Bridge Stack
▪
▪
▪
▪
▪
▪
▪
Aerospace high voltage power supply applications
Low mechanical stress design
Excellent thermal management - 2.5°C/W
Higher blocking voltages available - consult factory
Faster switching times available - consult factory
Other electrical configurations available - consult factory
TX, TXV, and S Level screening available1/
Electrical Characteristics
Symbol
Value
Units
Peak Repetitive Reverse and DC Blocking Voltage (Module)
VR(MODULE)
15,000
Volts
Peak Repetitive Reverse and DC Blocking Voltage (Each Bridge)
VR
2700
Volts
Average Rectified Forward Current (Non-Repetitive, t=8.3 msec Pulse)
IO
1
Amps
IFSM
25
Amps
TOP & TSTG
-65 to +150
°C
RθJB
2.5
°C/W
Peak Surge Current (Non-Repetitive, t=8.3ms Pulse, TA = 25°C)
Operating & Storage Temperature
Junction to Base
Maximum Thermal Resistance
Electrical Characteristics, Each Bridge Leg, @ TA = 25°C
Instantaneous Forward Voltage Drop
(IF=1.0A, 300µsec Pulse Min)
TA = 25°C
TA = 100°C
Reverse Leakage
(VR=2,500V, 300µsec Pulse Minimum)
Insulation Resistance
(All Terminals to Base @ 15,000V)
Reverse Recovery Time
(IF=0.5A, IR=1.0A, IRR=0.25A)
Symbol
Min
Max
Units
VF
--
6.0
Volts
IR1
IR2
---
10
200
µAmps
RINSUL1
10
--
GΩ
--
tRR
30
Case Outline: SPX2094
N
.84
E1
L
E2
M
H
K
.165
E
E3
E4
E7
A
E5
F
D
B
C
.15
.900
E11
E9
2.200
2.50
.150
#4-40 UNC-2B
.170 MIN LNG
4 Places
(Back Side)
.625
1.200
Tolerances
(Unless Specified):
.XX ± .03”
.XXX ± .010
E21
nsec
.185
2.13
10x .18 (=1.80)
E20
E19
E17
E18
E16
E22
E15
E1 E2
E3 E4
E5 E6
E9 E10
E7 E8
E11 E12
1/ Screening based on MIL-PRF-19500. Screening flows are available on request.
E13E14
PM0031B
SDA5000HF -SDA22000HF
30 nsec / 0.5 amp / 5,000 to 22,000 volts
High Voltage Rectifier
▪
▪
▪
▪
▪
▪
Low reverse leakage current
Low distributed and GRD capacitance
Corona free
Superior thermal shock resistance
Available in standard, fast, and ultra fast versions
TX, TXV, and S Level screening available1/
Peak
Inverse
Voltage
(per
leg)
Reverse
Recovery
Time2/
Average DC
Output
Current
Tc = Case
Temperature
Maximum
Surge
Current
(1 cycle)
PIV (V)
Max (ns)
IF (avg)
IFRM
25°C
25°C
55°C
100°C
25°C
SDA5000
5000
30
0.5
0.33
25
14
SDA8000
8000
30
0.5
0.33
25
SDA10000
10000
30
0.5
0.33
25
Part Number
Maximum
Forward
Voltage
Drop
VF
(V)
Maximum
Reverse
Current (per
leg) @ PIV
C
2x Ø.051±.003
IF
(A)
25°C
Case Outline: SDA5000HF - SDA22000HF
IR (µA)
25°C
100°C
0.5
10
200
20
0.5
10
200
26
0.5
10
B
A
2.000 MIN
2.000 MIN
A
B
C
SDA5000
1.125"
0.50"
0.25"
200
SDA8000
1.165"
0.50"
0.25"
SDA10000
2.000"
0.50"
0.25"
SDA12500
2.375"
0.50"
0.25"
SDA15000
2.750"
0.50"
0.25"
SDA12500
12500
30
0.5
0.33
25
32
0.5
10
200
SDA15000
15000
30
0.5
0.33
25
38
0.5
10
200
SDA19000
19000
30
0.5
0.33
25
48
0.5
10
200
SDA19000
3.500"
0.50"
0.25"
SDA22000
22000
30
0.5
0.33
25
56
0.5
10
200
SDA22000
4.250"
0.50"
0.25"
1/ Screening based on MIL-PRF-19500. Screening flows are available on request.
2/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR = 0.25A
Data sheets available at www.ssdi-power.com
RA0107B
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
9
High Reliability Screening
Solid State Devices Screening Per MIL-PRF-19500 Guidelines*
TX Level
TXV Level
Equivalent
Equivalent
S Level
Equivalent
Lot Acceptance
Temperature Cycling
Internal Visual1/
Internal Visual1/
Temperature Cycling
Temperature Cycling
Surge
Surge
Surge
(as specified)
(as specified)
(as specified)
Thermal Resp.
Thermal Resp.
Thermal Resp.
(as specified)
(as specified)
(as specified)
Acceleration
(some excluded)
PIND
Serialize
Interim Electrical
(case mount only)
Interim Electrical
(case mount only)
HTRB
HTRB
Interim Electrical
Read & Record
HTRB
48 hrs.
48 hrs.
48 hrs.
Interim Electrical
& Delta
Interim Electrical
& Delta
Interim Electrical
& Delta
Burn-in
Burn-in
Burn-in
Tran. & FET 160 hrs.
Diode & SCR HTRB 96 hrs.
Tran. & FET 160 hrs.
Diode & SCR HTRB 96 hrs.
Interim Electrical
& Delta
Interim Electrical
& Delta
Interim Electrical
& Delta
Hermeticity
Hermeticity
Hermeticity
Case Isolation
X-Ray
(N/A case mount)
Case Isolation
(case isolated packages only)
240 hrs.
(N/A case mount)
(case isolated packages only)
Note: 1/ X-ray in lieu of internal visual for COTS origin parts
External Visual
Case Isolation
(case isolated packages only)
*Specific Product Types May Have Alternate Screening Flows
Contact your local SSDI Representative or contact the factory directly at (562) 404-4474.
Email: [email protected]
10
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
Sales Representatives
Domestic
CentraMark Technical
Sales Associates
TX, OK, AR, LA
P.O. Box 450877
Garland, TX 75045-0877
Phone: 972-414-8188
Fax: 972-414-6788
ETSI, LLC.
DC, VA, MD
3 Church Circle, Suite 120
Annapolis, MD 21401
Phone: 410-974-9351
Fax: 410-974-8247
Giesting & Associates
OH, Western PA, IN, MI
2854 Blue Rock Rd.
Cincinnati, OH 45239
513-385-1105
[email protected]
SouthTech Marketing, LLC
AL, FL, GA, MS, NC,
Puerto Rico, SC
8213 Nantahala Dr.
Raleigh, NC 27612
919-781-0444
[email protected]
Scientific Devices - Phila, Inc.
East PA, South NJ, DE
1635 Clemens Rd.
Harleysville, PA 19438
215-256-8641
[email protected]
International
Brazil
Techso
Rua Fradique Coutinho
316 - Cj 41
Sao Paulo - SP
05416-000
Brazil
(55-11) 3120 5968
[email protected]
China
Rironic Electronic
Technology Co., Ltd
Room 1206
China Development Bank Building
No 2 First Gaoxin Road
Xi’an City, Shaanxi Province
P.R. China
+86-029-68683866
[email protected]
www.rironic.com
Denmark / Finland /
Norway / Sweden
Expando Electronics AB
Mörby Centrum, Plan 7
S-182 31 Danderyd, Sweden
+468 54490044
France
AR France
Germany
Manz Electronic Systems
Schauberstrasse 22
D-74354 Besigheim, Germany
49-7143-40310
India
Irys Electronics
261/2 Plot 4 & 5, Silver Oak Park
Baner Rd
Baner Pune 411045, India
91 20 2729 1836
Israel
FMS Aerospace Ltd.
12 Kehilat Venezia Street
Tel-Aviv 69400, Israel
972-3-6094977
[email protected]
Italy
Milano Brothers
Viale Enrico Fermi 79
00146 Roma, Italy
+39 3384969298
USA Office:
378 SW 12th Avenue
Deerfield Beach, FL 33442
954-420-5000
Japan
Sojitz Aerospace
Marunouchi Trust Tower Main
4th Floor, 8-3
Marunouchi 1-chome, Chiyoda-Ku
Tokyo, Japan 100-0005
+81-3-6870-7211
South Korea
CBOL Corporation
19850 Plummer St.
Chatsworth, CA 91311
818-721-5510
[email protected]
United Kingdom / Ireland
Johnson Group Services (JGS)
The Ryder Cloisters
36, Evelyn Road
Dunstable, Bedordshire
LU5 4NG
United Kingdom
+44 (0) 1582 603439
[email protected]
7 Rue du fosse blanc - Bat. D1
92230 Gennevilliers, France
+33 (0)1 47 91 75 30
[email protected]
30 nsec, 600 to 22000 volts Rectifier & Bridge Assemblies
11
Military and Aerospace Applications
ISO 9001:2008 and AS9100:2009 Rev. C Registered
State of the Art Products
▪
▪
▪
▪
High Voltage Rectifiers and Assemblies to 200kV
TVS and Zener Assemblies up to 120kV
Schottkys and Schottky Assemblies to 800A/1200V
Power Modules:
▪ Silicon Carbide Schottky Rectifiers (SiC)
▪ Bipolar
▪ FET
▪ IGBT
▪ Rectifier
▪ Schottky
Standard & Custom Discrete Components
▪
▪
▪
▪
▪
▪
Rectifiers
Schottkys
FETs
IGBTs
Linear Voltage Regulators
Bipolar Transistors
Obsolete and DMS
▪
▪
▪
▪
▪
▪
▪
▪
Bipolar Transistors
Rectifiers
Linear Voltage Regulators
Darlingtons
RF Products
SCRs
TVS
Zeners
AS9100:2009 Rev. C & ISO 9001:2008 Registered | 14701 Firestone Blvd. La Mirada, CA 90638
(562) 404 - 4474 | FAX (562) 404-1773 | [email protected] | www.ssdi-power.com