Good things come in small packages... SPA560 Series SDA267 Series SDA167 Series The SDA267, SPA560, SDA167, and SDA669 series feature high efficiency bridge rectifier assemblies. These products share the following advantages: ▪▪ High current ▪▪ Low forward voltage drop ▪▪ Low reverse leakage current ▪▪ Constructed with void-free, hermetically sealed discretes ▪▪ Aluminum case for maximum thermal conductivity ▪▪ TX, TXV, and S level screening available - Screening is based on MIL-PRF-19500. Screening flows are available on request. SDA669 Series SDA267Series 10 A, 50 - 1000 V, 150 nsec Single Phase Bridge Rectifier Assembly ▪▪ Small package size (0.75” x 0.75” x 0.5”) ▪▪ Higher blocking voltages available ▪▪ Available in standard, ultra fast, & hyper fast versions SPA560 Series 22 A, 600 - 1000 V, 70 nsec Three Phase Bridge Rectifier Assembly ▪▪ Small package size (0.89” x 0.89” x 0.39”) ▪▪ Higher blocking voltages available ▪▪ Available in standard, fast, & hyper fast versions SDA167 Series 25 A, 400 - 1000 V Three Phase Bridge Rectifier Assembly ▪▪ Electrically insulated aluminum case ▪▪ Also available with blade terminals ▪▪ Also available in fast and ultra fast versions SDA669 Series 30 A, 600 - 1000 V, 250 nsec Three Phase Bridge Rectifier Assembly ▪▪ Small package size (1.500” x 0.875” x 0.310”) ▪▪ Also available with turret or blade terminals ▪▪ Also available in ultra fast versions (70 nsec) Solid State Devices, Inc. 14701 Firestone Blvd La Mirada, CA 90638 (562)404-4474 | www.ssdi-power.com SDA267A thru SDA267G Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 10 AMPS 50 ─ 1000 VOLTS FAST RECOVERY SINGLE PHASE BRIDGE RECTIFIER Designer’s Data Sheet FEATURES: • • • • • • • • Average Output Current 10 Amps PIV 50 to 1000 Volts Reverse Recovery Time 150 ns Max Max Thermal Resistance 5.0oC/Watt Hermetically Sealed Diode Cells Turret Terminal Aluminum Case Available in Standard, Ultra Fast, and Hyper Fast versions. Consult Factory. ELECTRICAL CHARACTERISTICS Sine Peak Average DC Output Wave Average DC Inverse RMS Current Part Number Output Current Voltage Input TA= Ambient Temp T =Case Temp (no heat sink) (per leg) Voltage C Max. Peak Forward Surge Current (1 Cycle) Peak Repetitive Forward Current Maximum Forward Voltage (per leg) Maximum Reverse Current (per leg) @ PIV Symbol PIV Vr IF (AV) IF (AV) IFSM IFRM VF IR Units Volts Volts Amps Amps Amps Amps Volts μA 55oC 100oC 25oC 55oC 100oC Conditions 25oC 100oC SDA267A 50 35 10 6 4 3 1.7 125 60 1.2 2 50 SDA267B 100 70 10 6 4 3 1.7 125 60 1.2 2 50 SDA267C 200 140 10 6 4 3 1.7 125 60 1.2 2 50 SDA267D 400 280 10 6 4 3 1.7 125 60 1.2 2 50 SDA267E 600 420 10 6 4 3 1.7 125 60 1.2 2 50 SDA267F 800 560 10 6 4 3 1.7 125 60 1.2 2 50 SDA267G 1000 700 10 6 4 3 1.7 125 60 1.2 2 50 NOTES: * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% 1. Unless Otherwise Specified, All Electrical Characteristics @25ºC NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0077A DOC SPA560 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 22A / 600-1000V THREE PHASE BRIDGE RECTIFIER ASSEMBLY ULTRA FAST – 70 ns Part Number / Ordering Information 1/ SPA560 __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Lead Bend __ = Straight Leads │ UB = Up Bend │ DB = Down Bend │ └ Voltage/Family J = 600 V K = 800 V M = 1000 V Features: • • • • • • • • Higher Blocking Voltage Available. Contact Factory. Average Output Current 22 Amps Low Reverse Leakage Current Constructed with Void-free, Hermetically Sealed Discretes Aluminum Case for Maximum Thermal Conductivity Small Package Size (0.89 x 0.89 x 0.39”) TX and TXV & S Level Screening Available Superior Replacement for Sensitron S455DC, S455FC, & S455GC • Standard, Fast, & Hyper Fast Versions Available. Contact Factory. Maximum Ratings 3/ Peak Inverse Voltage Average Rectified Output Current (TC = Case Temperature) Symbol Value Units SPA560J SPA560K SPA560M PIV 600 800 1000 Volts TC = 55°C TC = 100°C IO1 IO2 22 15 Amps IFSM 125 Amps Top & Tstg -55 to +150 ºC RθJC 1.25 ºC/W Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on Rated Load) Operating & Storage Temperature Maximum Thermal Resistance, Junction to Case Notes: SPA560 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0091A DOC SPA560 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 3/ Symbol Min Typ Max Units VF1 –– –– 1.40 1.75 Volts Reverse Leakage Current (Rated PIV, TA = 25ºC) IR1 –– –– 10 µA Reverse Leakage Current (Rated PIV, TA = 100ºC) IR2 –– –– 250 µA RISO –– –– 10 MΩ trr –– –– 70 ns Maximum Forward Voltage Per Leg (TA = 25°C, pulsed) Isolation Resistance IF = 3A IF = 9A 1500V Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA TA = 25ºC (Measured on discrete rectifiers prior to assembly) VF2 NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25ºC. SPA560 Package Outline: (Shown with Straight Leads) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Lead Bend Options: DATA SHEET #: RA0091A DOC SDA167 Series Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 25 AMPS 400 - 1000V THREE PHASE BRIDGE RECTIFIER ASSEMBLY DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SDA 167 __ __ __ ⏐ ⏐ └ Terminals 2/ _ = Blade Terminals T = Turret Terminals ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ └ Finish __ = Anodized Case N = Ni Plated Case ⏐ ⏐ └ Voltage D = 400 V E = 600 V F = 800 V G = 1000 V Features: • • • • • • • PIV 400 - 1000 Volts Average Output Current 25 Amps Low Reverse Leakage Current Constructed with Void-Free, Hermetically Sealed Discretes Aluminum Case for Maximum Thermal Conductivity Electrically Insulated Aluminum Case Available in Fast and Ultra Fast Recovery Versions. Consult Factory. • TX and TXV & S Level Screening Available. Contact Factory. Maximum Ratings Peak Repetitive and Peak Surge Reverse Voltage Symbol Value Units VRRM VRSM VR 400 600 800 1000 Volts Io 25 Amps IFSM 150 Amps TOP & TSTG TJ -55 to +150 175 ºC RθJC 1.5 ºC/W SDA167D SDA167E SDA167F SDA167G Average Rectified Forward Current 3/ 4/ (Resistive Load, 60 Hz Sine Wave, TC = 55ºC) Peak Surge Current 5/ (8.3 ms Pulse, Superimposed on Rated Current at Rated Voltage, TC = 55 °C) Operating & Storage Temperature Maximum Junction Temperature Maximum Thermal Resistance 3/ (Junction to Case) SDA167 ( ) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. SDA167 ( T ) DATA SHEET #: RA0048B DOC SDA167 Series Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 4/ 5/ Symbol Min BVR 420 620 820 1020 VF1 Reverse Leakage Current (Rated VR, 300 µsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) Peak Reverse Voltage (IR = 50 µΑ) SDA167D SDA167E SDA167F SDA167G Instantaneous Forward Voltage Drop (300 - 500 µsec pulse) Insulation Leakage VR = 1500V (All Terminals to Case) RINS = 100 MΩ NOTES: * 1/ 2/ 3/ 4/ 5/ Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. For Package Outlines Contact Factory. Rating Applies to the Total Bridge. Derate Linearly at 0.263A/ºC for TC > 55ºC. Unless Otherwise Specified, All Electrical Characteristics @25ºC. IF = 3A IF = 9A Typ Max Units –– –– –– –– –– –– –– –– –– –– 1.05 1.20 Volts IR1 –– –– 10 µA IR2 –– –– 100 µA –– –– 15 µA Volts Available Part Numbers Part Number SDA167D SDA167E SDA167F SDA167G SDA167DT SDA167ET SDA167FT SDA167GT Document 70-0157-S167 70-0157-S167 70-0157-S167 70-0157-S167 70-0157-S167-1 70-0157-S167-1 70-0157-S167-1 70-0157-S167-1 SDA669 Series Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 30A / 600 - 1000V THREE PHASE BRIDGE RECTIFIER ASSEMBLY Part Number / Ordering Information 1/ SDA669 __ _F_ __ __ │ │ │ └ Lead Bend 3/ __ = Straight Leads │ │ │ UB = Up Bend │ │ │ DB = Down Bend │ │ │ │ │ └ Terminals 2/ 3/ _ = Copper Leads │ │ T = Turret Terminals │ │ │ └ Speed F = Fast (250 ns typ.) │ └ Voltage J = 600 V K = 800 V M = 1000V Features: • • • • • • • Up to 1000 V Blocking Voltage Average Output Current 30 Amps Low Reverse Leakage Current Constructed with Void-free, Hermetically Sealed Discretes Aluminum Case for Maximum Thermal Conductivity Small Package Size (1.500 x 0.875 x 0.310”) TX and TXV & S Level Screening Available • Ultra Fast (70ns) versions available. Contact Factory Maximum Ratings Peak Repetitive and Peak Surge Reverse Voltage SDA669J SDA669K SDA669M Average Rectified Forward Current 4/ (Resistive Load, 60 hz Sine Wave, TC = 55°C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) Operating & Storage Temperature Maximum Thermal Resistance Junction to Case Symbol Value Units VRRM VRSM VR 600 800 1000 Volts Io 30 Amps IFSM 150 Amps Top & Tstg -55 to +150 ºC RΘJC 2.0 ºC/W 1 SDA669 ( __ ) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. SDA669 (T) DATA SHEET #: RA0026D DOC SDA669 Series Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristic 5/ Symbol Min Typ Max Units VF1 VF2 –– –– 1.15 1.30 VDC Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µsec pulse minimum) IR1 –– –– 5 µA Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) IR2 –– –– 60 µA Reverse Recovery Time (TA = 25°C, IF = 0.5A, IR = 1.0A, IRR = 0.25A) tRR –– 250 325 nsec Instantaneous Forward Voltage Drop (TA = 25°C, 300 - 500 µsec pulse) IF = 3A IF = 9A NOTES: * 1/ 2/ 3/ 4/ 5/ Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. For Package Outlines Contact Factory. Up and Down Bend Configurations are Available for ‘__’ ( Leaded ) Packages Only. Derate Linearly at 0.28A/ºC for TC > 55ºC. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Available Part Numbers: SDA669JF; SDA669JFT SDA669KF; SDA669KFT SDA669MF; SDA669MFT Mounting Diagram: 2/