F-215 ™ S2SD–30–24–L–05.00–S DUIUSUCURUEUTUE (2,00 mm) .0787" S2SD, S2SDT SERIES S2SD–10–24–L–05.00–DS ™ TIGER EYE CABLE ASSEMBLY SPECIFICATIONS Choice of PVC or Teflon® cable Mates with: T2M For complete specifications see www.samtec.com?S2SD or www.samtec.com?S2SDT Insulator Material: Black LCP Contact Material: BeCu Plating: Au over 50µ" (1,27 µm) Ni Wire: 24, 26, 28 or 30 AWG Operating Temp Range: -10°C to +105°C (PVC) -40°C to +125°C (*Teflon®) Current Rating (S2SD-24/T2M): 3.8 A per pin (1 pin powered per row) Voltage Rating: 250 VAC RoHS Compliant: Yes ™ 24, 26, 28 or 30 Wire gauge ™ Optional Screw Down ® *DuPont Teflon is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. • Tiger Eye™ contacts • Retention latches TYPE PINS PER ROW WIRE GAUGE –05, –07, –10, –15, –20, –25, –30 –24 –24C PLATING OPTION ASSEMBLED LENGTH –L –“XX.XX” END OPTION END 2 OPTION ALSO AVAILABLE (MOQ Required) • Other sizes Contact Samtec. S2SD = Double Row PVC Cable APPLICATION –24C CABLE COLOR CODING PIN COLOR 1 2 3 4 5 6 7 8 9 10 ETC BROWN RED ORANGE YELLOW GREEN VIOLET GRAY WHITE BLACK BLUE REPEAT S2SDT = Double Row *Teflon® Cable (24, 28, 30 Gauge only) (2,00) .0787 (5,15) .203 01 (4,42) .174 (2,64) .104 Assembly Length ± (3,18) .125 (11,38) .448 (1,60) .063 –SR = Single End –D = Double End –(X)R No. of positions x (2,00) .0787 + (3,50) .138 (7,52) .296 (2,11) .083 –S Specify "S" for single ended and "D" for double ended. –26 –28 –30 (Standard sizes) = Wire Length in Inches (69,85 mm) 02.75" min. 02 Notes: For wiring option information refer to drawing on web. Teflon ® cable is intended for crimp only. Contact Samtec for solderable cable applications. = Color Coded Cable (S2SD only) = 10µ" (0,25 µm) Gold on contact –D–NUS Some lengths, styles and options are non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. = Retention Latch (-SR mates with T2M-WT) –(X)S = Screw Down (10 positions minimum) (mates with T2M-DS) (Only available with –D, –DR & –DS) –NUS = Notch up, straight (Pin 1 to Pin N-1) –NDS = Notch down, straight (Pin 1 to Pin 2) –NUX = Notch up, crossed (Pin 1 to Pin N) –NDX = Notch down, crossed (Pin 1 to Pin 1)