MAPD-011026 3-Way 0° Power Divider 5 - 300 MHz Rev. V1 Features Surface Mount 3 way 0 degree 260°C Reflow Compatible RoHS Compliant, lead free Available on Tape and Reel Description The MAPD-011026 is a 3 Way 0o power divider in a low cost, surface mount package. Ideally suited for high volume CATV applications. Functional Schematic OUTPUT 1 1 OUTPUT 2 INPUT Ordering Information 8 Part Number Description MAPD-011026 500 pc reel MAPD-011026-TB Sample Test Board 4 OUTPUT 3 5 Pin Configuration Pin No. Pin Name 1 Output Port 1 2,3,6,7 Ground 4 Output Port 2 5 Output Port 3 8 Input * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPD-011026 3-Way 0° Power Divider 5 - 300 MHz Rev. V1 Electrical Specifications: TA = 25°C, Z0 = 75 Ω, Pin = 0 dBm Parameter Frequency Units Min. Typ. Max. Insertion Loss (Ref value: 4.77 dB) 5 - 204 MHz 204 - 300 MHz dB - 5.1 5.2 5.2 5.3 Isolation 5 - 200 MHz 200 - 300 MHz dB 25 22 27 23 — Amplitude Balance 5 - 204 MHz 204 - 300 MHz dB — 0.04 0.10 0.1 0.2 Phase Balance 5 - 204 MHz 204 - 300 MHz deg. — 0.35 0.65 0.9 1.5 Input Return Loss 5 - 204 MHz 204 - 300 MHz dB 31 26 34 30 — Output Return Loss 5 - 204 MHz 204 - 300 MHz dB 26 23 — Absolute Maximum Ratings4,5 Parameter Absolute Maximum RF Input Power 0.5 W DC Current 500 mA Operating Temperature -40°C to +85°C 23 20 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Full temperature plots available on request. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPD-011026 3-Way 0° Power Divider 5 - 300 MHz Rev. V1 Typical Performance Curves 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MAPD-011026 3-Way 0° Power Divider 5 - 300 MHz Rev. V1 Recommended PCB Layout Outline Drawing Tape & Reel Information Item Dimension Ao 10.26 mm +/-0.1 mm Bo 13.46 mm +/-0.1 mm Ko 6.10 mm +/-0.1 mm W 24.00 mm +/-0.3 mm P1 16.00 mm +/-0.1 mm Orientation F2 Reference Application Note ANI-019 for orientation NOTES: 1. Dimensions in mm. 2. Tolerance: ±0.2 mm unless otherwise noted. 3. Model number and lot code are printed on the reel. 4. Lead plating: ENIG. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support