FL630W-21 Super Beam type LED FL630W-21 is an InGaAlP LED mounted on a lead frame and molded with super beam lens. On forward bias, it emits a band of visible light which peaks 635nm. ♦Specifications 1) Product Name 2) Type No. 3) Chip (1) Chip Material (2) Peak Wavelength 4) Package (1) Type (2) Resin Material (3) Lead Frame ♦Outer dimension (Unit: mm) Epoxy mold type LED FL630W-21 InGaAlP 635nm typ. Super Beam type LED Epoxy Resin Soldered ♦Absolute Maximum Ratings Item Power Dissipation Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Maximum Rated Value Unit Ambient Temperature PD IF VR TOPR 140 50 5 -30 ~ +85 -30 ~ +100 260 mW mA V °C °C °C Ta=25°C Ta=25°C Ta=25°C TSTG TSOL ‡Soldering condition: Soldering condition must be completed within 3 seconds at 260°C ♦Electro-Optical Characteristics Item Forward Voltage Reverse Current Total Radiated Power Brightness Peak Wavelength Half Width Viewing Half Angle Symbol Condition VF IR PO IV IF=20mA VR=5V IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA λP ∆λ θ 1/2 Minimum 5,000 625 ‡Brightness is measured byTektronix J-16. ‡Total Radiated Power is measured by Photodyne #500 Typical Maximum Unit 2.2 2.6 10 V uA mW mcd nm nm deg. 8.0 10,000 635 15 ±8 645